Download or read book Induction machines handbook 2 vol written by Ion BOLDEA and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-26 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.
Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-11-19 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Induction Machines Handbook comprises two volumes, Induction Machines Handbook: Steady State Modeling and Performance and Induction Machines Handbook: Transients, Control Principles, Design and Testing. The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion, i-home appliances makes this third edition state of the art tool, conceived with numerous case studies, timely for both Academia and Industry. The first volume offers a thorough treatment of steady state modeling and performance of induction machines, the most used electric motors (generators) in rather constant or variable speed drives for even lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. The second volume presents a practical up to date treatment of intricate issues with induction machine (IM) required for design and testing both in rather constant and variable speed (with power electronics) drives. It contains ready to use in industrial design and testing knowledge with numerous case studies to facilitate thorough assimilation of new knowledge.
Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-26 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.
Download or read book The Electric Generators Handbook 2 Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2005-11-16 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern world hungers for electricity. Traditionally, this hunger was sated with predominantly constant-speed-regulated, synchronous generators. However, new demands require the stable, quick, and efficient delivery and control offered by variable-speed generators. Surveying all of the technologies used to satisfy the world's demand for o
Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade's progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM's steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.
Download or read book The Induction Machine Handbook written by Ion Boldea and published by CRC Press. This book was released on 2010-12-12 with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt: Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on ind
Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.
Download or read book Electric Generators Handbook Two Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2018-10-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.
Download or read book Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2021-10-08 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage of the state of the art, this Second Edition introduces basic types of transformers and electric machines. Classifications and characterization—modeling and performance—of power electric transformers (single and multiphase), motors and generators, commercial machines (dc brush, induction dc excited synchronous, PM synchronous, reluctance synchronous) and some new ones (multiphase ac machines, switched reluctance machines) with great potential for industry with rotary or linear motion are all treated in the book. The book covers, in detail, circuit modeling characteristics and performance characteristics under steady state, testing techniques and preliminary electromagnetic-thermic dimensioning with lots of solved numerical examples and special cases to illustrate new electric machines with strong industrialization potential. All formulae used to characterize parameters and performance may be safely used in industry for preliminary designs and have been applied in the book through numerical solved examples of industrial interest. Numerous computer simulation programs in MATLAB® and Simulink® that illustrate performance characteristics present in the chapters are included and many be used as homework to facilitate a deeper understanding of fundamental issues. This book is intended for a first-semester course covering electric transformers, rotary and linear machines, steady-state modeling and performance computation, preliminary dimensioning, and testing standardized and innovative techniques. The textbook may be used by R&D engineers in industry as all machine parameters and characteristics are calculated by ready-to-use industrial design mathematical expressions.
Download or read book Handbook of Electric Motors written by Hamid A. Toliyat and published by CRC Press. This book was released on 2018-10-03 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current issues in electric motor design, installation, application, and performance, this second edition serves as the most authoritative and reliable guide to electric motor utilization and assessment in the commercial and industrial sectors. Covering topics ranging from motor energy and efficiency to computer-aided design and equipment selection, this reference assists professionals in all aspects of electric motor maintenance, repair, and optimization. It has been expanded by more than 40 percent to explore the most influential technologies in the field including electronic controls, superconducting generators, recent analytical tools, new computing capabilities, and special purpose motors.
Download or read book The Industrial Electronics Handbook Five Volume Set written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2011-03-04 with total page 5483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial electronics systems govern so many different functions that vary in complexity-from the operation of relatively simple applications, such as electric motors, to that of more complicated machines and systems, including robots and entire fabrication processes. The Industrial Electronics Handbook, Second Edition combines traditional and new
Download or read book Handbook of Electrical Engineering written by Alan L. Sheldrake and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical treatment of power system design within the oil, gas, petrochemical and offshore industries. These have significantly different characteristics to large-scale power generation and long distance public utility industries. Developed from a series of lectures on electrical power systems given to oil company staff and university students, Sheldrake's work provides a careful balance between sufficient mathematical theory and comprehensive practical application knowledge. Features of the text include: Comprehensive handbook detailing the application of electrical engineering to the oil, gas and petrochemical industries Practical guidance to the electrical systems equipment used on off-shore production platforms, drilling rigs, pipelines, refineries and chemical plants Summaries of the necessary theories behind the design together with practical guidance on selecting the correct electrical equipment and systems required Presents numerous 'rule of thumb' examples enabling quick and accurate estimates to be made Provides worked examples to demonstrate the topic with practical parameters and data Each chapter contains initial revision and reference sections prior to concentrating on the practical aspects of power engineering including the use of computer modelling Offers numerous references to other texts, published papers and international standards for guidance and as sources of further reading material Presents over 35 years of experience in one self-contained reference Comprehensive appendices include lists of abbreviations in common use, relevant international standards and conversion factors for units of measure An essential reference for electrical engineering designers, operations and maintenance engineers and technicians.
Download or read book Induction Motors written by Rui Esteves Araújo and published by BoD – Books on Demand. This book was released on 2012-11-14 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivated by the need of energy-efficiency improvements, process optimization, soft-start capability and numerous other environmental benefits, it may be desirable to operate induction motors for many applications at continuously adjustable speeds. The induction motor drives can provide high productivity with energy efficiency in different industrial applications and are the basis for modern automation. This book provides an account of this developing subject through such topics as modelling, noise, control techniques used for high-performance applications and diagnostics. Compiled from contributions by international researchers, this is not a textbook, but the result is an interesting exploration of this technology, that provides a combination of theory, implementation issues and practical examples.
Download or read book Electric Lighting and Power Distribution written by William Perren Maycock and published by . This book was released on 1903 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Induction Machines Design Handbook Second Edition written by Ion Boldea and published by CRC Press. This book was released on 2009-12-09 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in power electronics and digital control have made the rugged, low-cost, high-performance induction machine the popular choice of electric generator/motor in many industries. As the induction machine proves to be an efficient power solution for the flexible, distributed systems of the near future, the dynamic worldwide market continues to grow. It is imperative that engineers have a solid grasp of the complex issues of analysis and design associated with these devices. The Induction Machines Design Handbook, Second Edition satisfies this need, providing a comprehensive, self-contained, and up-to-date reference on single- and three-phase induction machines in constant and variable speed applications. Picking up where the first edition left off, this book taps into the authors’ considerable field experience to fortify and summarize the rich existing literature on the subject. Without drastically changing the effective logical structure and content of the original text, this second edition acknowledges notable theoretical and practical developments in the field that have occurred during the eight years since the first publication. It makes corrections and/or improvements to text, formulae, and figures. New material includes: Introduction of more realistic specifications and reworked numerical calculations in some of the examples Changes in terminology Discussion of some novel issues, with illustrative results from recent literature New and updated photos Data on new mild magnetic materials (metglass) An industrial "sinusoidal" two-phase winding Illustrations of finite element method airgap flux density Enhanced presentations of unbalanced voltage and new harmonic-rich voltage supply IM performance Discussion of stator (multiconductor) winding skin effect by finite element method Broad coverage of induction machines includes applications, principles and topologies, and materials, with numerical examples, analysis of transient behavior waveforms and digital simulations, and design sample cases. The authors address both standard and new subjects of induction machines in a way that will be both practically useful and inspirational for the future endeavors of professionals and students alike.
Download or read book Handbook of Asynchronous Machines with Variable Speed written by Hubert Razik and published by John Wiley & Sons. This book was released on 2013-01-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook deals with the asynchronous machine in its close environment. It was born from a reflection on this electromagnetic converter whose integration in industrial environments takes a wide part. Previously this type of motor operated at fixed speed, from now on it has been integrated more and more in processes at variable speed. For this reason it seemed useful, or necessary, to write a handbook on the various aspects from the motor in itself, via the control and while finishing by the diagnosis aspect. Indeed, an asynchronous motor is used nowadays in industry where variation speed and reliability are necessary. We must know permanently for the sensitive systems, the state of process and to inform the operator of the appearance of any anomaly and its severity.
