Download or read book Incorporating Carbon Nanotubes Into Carbon Fiber Via Surface Modification written by Robert Benjamin Ripy and published by . This book was released on 2016 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever more advanced materials need to be designed to further the exploration of avenues of science and engineering. Metals and traditional composites are not meeting the needs of today's stringent demands for lightweight and strong materials. There is a need for advanced materials that are lighter and stronger to replace conventional materials; carbon fiber composites became the obvious choice because of their outstanding mechanical properties. Polyacrylonitrile (PAN) based carbon fiber has reached its apex in terms of its strength to weight ratio. Carbon nanotubes (CNTs) offer a lightweight and potentially stronger alternative to PAN based fibers. However, it is difficult to translate the properties of individual CNTs macroscopically. The next step to overcome this barrier is to introduce highly aligned CNTs into carbon fiber. Carbon nanotube modified carbon fibers are imperative for the next step in achieving lightweight, ultra-strong fibers, to enhance their fuel efficient application in vehicles.
Download or read book Epoxy Composites written by Debdatta Ratna and published by iSmithers Rapra Publishing. This book was released on 2007-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Nanotube Superfiber Materials written by Rachit Malik and published by Elsevier Inc. Chapters. This book was released on 2013-09-16 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Individual carbon nanotubes (CNTs) have exceptional mechanical and electrical properties. However, the transfer of these extraordinary qualities into CNT products, without compromising performance, remains a challenge. This chapter presents an overview of the manufacturing of CNT sheets and buckypaper and also describes research performed at the University of Cincinnati in this field. CNT arrays were grown using the chemical vapor deposition method. Sheets were drawn from the spinnable CNT arrays and characterized using scanning electron microscopy to show the highly unidirectional alignment of the nanotubes in the sheet. The anisotropic morphology of the sheet provides superior properties along one material axis as observed by measuring the tensile strength, electrical resistivity, optical transmittance, and electromagnetic interference shielding properties of the material. Surface modification of aligned multiwall nanotube sheets was carried out via incorporation of an atmospheric pressure plasma jet in the sheet posttreatment process. Helium/oxygen plasma was utilized to produce carboxyl (–COO−) functionality on the surface of the nanotubes. X-ray photoelectron spectroscopy confirmed the presence of the functional groups on the nanotube surface. The sheet was further characterized using Raman spectroscopy, Fourier transform infrared spectroscopy, and contact angle testing. Composite laminates made from functionalized CNT sheets showed higher strength than those made with pristine sheets. The effects of plasma power and oxygen concentration were studied in order to determine the best possible parameters for functionalization. Plasma treatment is a useful tool for fast, clean and dry functionalization of CNTs. This study demonstrates the ease of incorporating the plasma tool in the manufacturing process of sheets leading to the production of CNT/polymer composites. Macroscopic structures of nanotubes such as threads and sheets are leading to novel applications.
Download or read book Carbon Fiber Polymer matrix Structural Composities Tailored for Multifunctionality by Filler Incorporation written by Seungjin Han and published by . This book was released on 2013 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation provides multifunctional carbon fiber polymer-matrix structural composites for vibration damping, thermal conduction and thermoelectricity. Specifically, (i) it has strengthened and stiffened carbon fiber polymer-matrix structural composites by the incorporation of halloysite nanotubes, carbon nanotubes and silicon carbide whiskers, (ii) it has improved mechanical energy dissipation using carbon fiber polymer-matrix structural composites with filler incorporation, (iii) it has increased the through-thickness thermal conductivity of carbon fiber polymer-matrix composite by curing pressure increase and filler incorporation, and (iv) it has enhanced the thermoelectric behavior of carbon fiber polymer-matrix structural composites. Low-cost natural halloysite nanotubes (0. 1 ℗æm diameter) were effective for strengthening and stiffening continuous fiber polymer-matrix composites, as shown for crossply carbon fiber (5 ℗æm diameter, ~59 vol. %) epoxy-matrix composites under flexure, giving 17% increase in strength, 11% increase in modulus and 21% decrease in ductility. They were less effective than expensive multiwalled carbon nanotubes (0. 02 ℗æm diameter), which gave 25% increase in strength, 11% increase in modulus and 14% decrease in ductility. However, they were more effective than expensive silicon carbide whiskers (1 ℗æm diameter), which gave 15% increase in strength, 9% increase in modulus and 20% decrease in ductility. Each filler, at ~2 vol. %, was incorporated in the composite at every interlaminar interface by fiber prepreg surface modification. The flexural strength increase due to halloysite nanotubes incorporation related to the interlaminar shear strength increase. The measured values of the composite modulus agreed roughly with the calculated values based on the Rule of Mixtures. Continuous carbon fiber composites with enhanced vibration damping under flexure are provided by incorporation of fillers between the laminae. Exfoliated graphite (EG) as a sole filler is more effective than carbon nanotube (SWCNT/MWCNT), halloysite nanotube (HNT) or nanoclay as sole fillers in enhancing the loss tangent, if the curing pressure is 2. 0 (not 0. 5) MPa. The MWCNT, SiC whisker and halloysite nanotube as sole fillers are effective for increasing the storage modulus. The combined use of a storage-modulus-enhancing filler (CNT, SiC whisker or HNT) and a loss-tangent-enhancing filler (EG or nanoclay) gives the best performance. With EG, HNT and 2. 0-MPa curing, the loss modulus is increased by 110%, while the flexural strength is decreased by 14% and the flexural modulus is not affected. With nanoclay, HNT and 0. 5-MPa curing, the loss modulus is increased by 96%, while the flexural strength and modulus are essentially not affected. The low through-thickness thermal conductivity limits heat dissipation from continuous carbon fiber polymer-matrix composites. This conductivity is increased by up to 60% by raising the curing pressure from 0. 1 to 2. 0 MPa and up to 33% by incorporation of a filler (61. 5 vol. %) at the interlaminar interface. The thermal resistivity is dominated by the lamina resistivity (which is contributed substantially by the intralaminar fiber-fiber interfacial resistivity), with the interlaminar interface thermal resistivity being unexpectedly negligible. The lamina resistivity and intralaminar fiber-fiber interfacial resistivity are decreased by up to 56% by raising the curing pressure and up to 36% by filler incorporation. Thermoelectric structural materials are potentially attractive for large-scale energy harvesting. Through filler incorporation and unprecedented decoupling of the bulk (laminae) and interfacial (interlaminar interfaces) contributions to the Seebeck voltage (through-thickness Seebeck voltage of a crossply continuous carbon fiber/epoxy composite laminate), this work provides thermoelectric power magnitudes at ~70°C up to 110, 1670 and 11000 ìV/K for the laminate, a lamina and an interlaminar interface respectively. The interface provides an apparent thermoelectric effect due to carrier backflow. The interfacial voltage is opposite in sign from the laminate and lamina voltages and is slightly lower in magnitude than the lamina voltage. The through-thickness thermoelectric behavior of continuous carbon fiber epoxy-matrix structural composites has been greatly improved by the use of tellurium particles (13 vol. % of composite), bismuth telluride particles (2 vol. %) and carbon black (2 vol. %) at the interlaminar interface.^The thermoelectric power is increased from 8 to 163 ℗æV/K, while the electrical resistivity is decreased from 0. 17 to 0. 02 ©9. cm, the thermal conductivity is decreased from 1. 31 to 0. 51 W/m. K, and the dimensionless thermoelectric figure of merit ZT at 70°C is increased from 9 x 10-6 to 9 x 10-2. Decrease in the curing pressure from 4. 0 to 0. 5 MPa decreases ZT slightly, mainly due to the increase in electrical resistivity.
Download or read book Carbon Composites written by Eduardo A. Castro and published by CRC Press. This book was released on 2023-06-02 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume demonstrates the unique place in nanotechnology and nanoscience that carbon nanomaterials occupy owing to their exceptional chemical, mechanical, thermal, and electrical properties. Carbon nanomaterials have diverse applications in super strong composite materials, smart sensors, energy storage and conversion, super-capacitors, and more. Focusing on materials rather than mechanics, this volume discusses the key roles of materials science and engineering in the development of composite materials. The result of research by many highly qualified experts in the field of experimental and theoretical research on graphene and its derivatives, the volume describes experimental methods for obtaining and characterizing samples of chemically modified graphene. It reviews the potential application areas and modifications of graphene-based composite materials and interprets the interesting physical effects discovered for the first time for graphene materials under consideration. This book covers the innovative methodologies and strategies adopted in carbon materials research area including: Synthesis, characterization, and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon-based nanostructured materials The use of carbon nanomaterials for energy applications Development of carbon nanotubes reinforced metal matrix composites and non-metallic composites and their myriad potential end-use applications Key challenges to the successful and widespread implementation of carbon nanotubes reinforced metal matrix composites and non-metallic composites Methods for quantification and improved control of carbon nanotubes distributions Recent research and design trends for carbon nanomaterials-based sensors for a variety of applications Advances and potential applications in environmental monitoring and healthcare The book will be useful for postgraduate students and researchers as well as for experts in industrial sectors. It will also appeal to those involved in materials science and nanotechnology.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Carbon Nanotubes written by Felix Ryler and published by . This book was released on 2016-10-01 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. These are high performance materials that exhibit unusual property combinations and unique design possibilities and are thought of as the materials of the 21st century. With an estimated annual growth rate of about 25% and huge demand for engineering polymers, their potential is so promising that they are useful in several applications ranging from packaging to bio-medical. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. A carbon nanotube (CNT) is a miniature cylindrical carbon structure that has hexagonal graphite molecules attached at the edges. Nanotubes look like a powder or black soot, but they're actually rolled-up sheets of graphene that form hollow strands with walls that are only one atom thick. Nanotubes, which are sometimes called buckytubes, were developed from the Fullerene, a structure that is similar to the geodesic domes. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. Nanotubes are members of the fullerene structural family, which also includes buckyballs. Whereas buckyballs are spherical in shape, a nanotube is cylindrical, with at least one end typically capped with a hemisphere of the buckyball structure. Carbon Nanotubes - Polymer Nanocomposites focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers.
Download or read book Processing And Properties Of Nanocomposites written by Suresh G Advani and published by World Scientific. This book was released on 2006-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is progressing very rapidly. This book focuses on carbon nanotubes and nano clays and explore their importance and roles in composites. Hence, the chapters address processing, rheology, mechanical properties and their interaction with fiber composites.Written by renowned researchers, this book is a collection of nine chapters which embrace the role of nano particles in composites. The first three chapters focus on the use of carbon nanotubes in composites. Chapter 4 explores the interaction between traditional fiber composites and the use of nano particles in terms of benefits and property enhancement in addition to the processing of such materials. Chapter 5 discusses in detail the rheology of suspensions that contain nanofibers and how one can modify existing models to describe their flow behavior. Chapters 6 through 9 address nano clay composites.
Download or read book Epoxy Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a one-stop resource for in-depth knowledge on epoxy composites from leading voices in the field Used in a wide variety of materials engineering applications, epoxy composites are highly relevant to the work of engineers and scientists in many fields. Recent developments have allowed for significant advancements in their preparation, processing and characterization that are highly relevant to the aerospace and automobile industry, among others. In Epoxy Composites: Fabrication, Characterization and Applications, a distinguished team of authors and editors deliver a comprehensive and straightforward summary of the most recent developments in the area of epoxy composites. The book emphasizes their preparation, characterization and applications, providing a complete understanding of the correlation of rheology, cure reaction, morphology, and thermo-mechanical properties with filler dispersion. Readers will learn about a variety of topics on the cutting-edge of epoxy composite fabrication and characterization, including smart epoxy composites, theoretical modeling, recycling and environmental issues, safety issues, and future prospects for these highly practical materials. Readers will also benefit from the inclusion of: A thorough introduction to epoxy composites, their synthesis and manufacturing, and micro- and nano-scale structure formation in epoxy and clay nanocomposites An exploration of long fiber reinforced epoxy composites and eco-friendly epoxy-based composites Practical discussions of the processing of epoxy composites based on carbon nanomaterials and the thermal stability and flame retardancy of epoxy composites An analysis of the spectroscopy and X-ray scattering studies of epoxy composites Perfect for materials scientists, polymer chemists, and mechanical engineers, Epoxy Composites: Fabrication, Characterization and Applications will also earn a place in the libraries of engineering scientists working in industry and process engineers seeking a comprehensive and exhaustive resource on epoxy composites.
Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by IntechOpen. This book was released on 2011-08-17 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. This books focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers. The book has been divided into three sections. The first section deals with fabrication and property analysis of new carbon nanotube structures. The second section deals with preparation and characterization of polymer composites with CNTs followed by the various applications of polymers with CNTs in the third section.
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book Advanced Topics in Characterization of Composites written by Michael R. Kessler and published by Trafford Publishing. This book was released on 2004 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
