Download or read book In situ Thermoelectrochemistry written by Peter Gründler and published by Springer. This book was released on 2015-02-11 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first rigorous treatment of thermoelectrochemistry, providing an overview that will stimulate electrochemists to develop and apply modern thermoelectrochemical methods. While classical static approaches are also covered, the emphasis lies on methods that make it possible to independently vary temperature such as in-situ heating of electrodes by means of electric current, microwaves or lasers. For the first time, “hot-wire electrochemistry” is examined in detail. The theoretical background presented addresses all aspects of temperature impacts in the context of electrochemistry.
Download or read book In situ Thermoelectrochemistry written by Peter Gründler and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first rigorous treatment of thermoelectrochemistry, providing an overview that will stimulate electrochemists to develop and apply modern thermoelectrochemical methods. While classical static approaches are also covered, the emphasis lies on methods that make it possible to independently vary temperature such as in-situ heating of electrodes by means of electric current, microwaves or lasers. For the first time, "hot-wire electrochemistry" is examined in detail. The theoretical background presented addresses all aspects of temperature impacts in the context of electrochemistry. .
Download or read book Nanoscience and Nanotechnology Proceedings of the INFN LNF 2018 Conference written by Stefano Bellucci and published by MDPI. This book was released on 2020-01-03 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results presented in this volume highlight some of the most recent advances in nanoscience and nanotechnology studies, from both the physical and chemical point of view, with an eye also to possible engineering applications. These studies demonstrate directly how effective, and at the same time stimulating is implementing the “cross-fertilization” procedure. Indeed, multidisciplinary research allows one to catch more easily the analogies inherent different areas of science, as well as to take advantage and optimize different methods and techniques, often borrowed from other research areas. In the present Special Issue, we included six published papers. The latter contributions, on the one hand, are developed at the theory level and, on the other hand, show experimental results on the realization and experimental characterization of nanostructured systems, suitable for yielding progress towards the realization of systems and devices, that can ultimately lead to industrial applications. The results show that recent scientific research advances in these areas may provide important steps in the direction of fostering innovation and technological development.
Download or read book Polymers in Energy Conversion and Storage written by Inamuddin and published by CRC Press. This book was released on 2022-06-28 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research and development activities in energy conversion and storage are playing a significant role in our daily lives owing to the rising interest in clean energy technologies to alleviate the fossil-fuel crisis. Polymers are used in energy conversion and storage technology due to their low-cost, softness, ductility and flexibility compared to carbon and inorganic materials. Polymers in Energy Conversion and Storage provides in-depth literature on the applicability of polymers in energy conversion and storage, history and progress, fabrication techniques, and potential applications. Highly accomplished experts review current and potential applications including hydrogen production, solar cells, photovoltaics, water splitting, fuel cells, supercapacitors and batteries. Chapters address the history and progress, fabrication techniques, and many applications within a framework of basic studies, novel research, and energy applications. Additional Features Include: Explores all types of energy applications based on polymers and its composites Provides an introduction and essential concepts tailored for the industrial and research community Details historical developments in the use of polymers in energy applications Discusses the advantages of polymers as electrolytes in batteries and fuel cells This book is an invaluable guide for students, professors, scientists and R&D industrial experts working in the field.
Download or read book Journal written by American Chemical Society and published by . This book was released on 2002 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwaves in Organic Synthesis written by Antonio de la Hoz and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the bestselling two-volume reference covers everything you need to know about microwave technology for synthesis - from the best equipment to nonthermal effects, from solid-support reactions to catalysis. Completely revised and updated with half of the authors completely new to the project, this comprehensive work is clearly divided into two parts on the fundamentals of microwave irradiation, and application of microwaves and synergies with other enabling techniques. Also new to this edition are chapters on on-line monitoring, flow chemistry, combination with ultrasounds and natural products, including multicomponent reactions. An indispensable source for organic, catalytic, physical, and medicinal chemists.
Download or read book Handbook of Electrochemistry written by Cynthia G. Zoski and published by Elsevier. This book was released on 2007-02-07 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry plays a key role in a broad range of research and applied areas including the exploration of new inorganic and organic compounds, biochemical and biological systems, corrosion, energy applications involving fuel cells and solar cells, and nanoscale investigations. The Handbook of Electrochemistry serves as a source of electrochemical information, providing details of experimental considerations, representative calculations, and illustrations of the possibilities available in electrochemical experimentation. The book is divided into five parts: Fundamentals, Laboratory Practical, Techniques, Applications, and Data. The first section covers the fundamentals of electrochemistry which are essential for everyone working in the field, presenting an overview of electrochemical conventions, terminology, fundamental equations, and electrochemical cells, experiments, literature, textbooks, and specialized books. Part 2 focuses on the different laboratory aspects of electrochemistry which is followed by a review of the various electrochemical techniques ranging from classical experiments to scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry. Applications of electrochemistry include electrode kinetic determinations, unique aspects of metal deposition, and electrochemistry in small places and at novel interfaces and these are detailed in Part 4. The remaining three chapters provide useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials. * serves as a source of electrochemical information * includes useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials * reviews electrochemical techniques (incl. scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry)
Download or read book Electrochemistry for the Environment written by Christos Comninellis and published by Springer Science & Business Media. This book was released on 2009-10-15 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment technology is undergoing a profound transformation due to the fundamental changes in regulations governing the discharge and disposal of h- ardous pollutants. Established design procedures and criteria, which have served the industry well for decades, can no longer meet the ever-increasing demand. Toxicity reduction requirements dictate in the development of new technologies for the treatment of these toxic pollutants in a safe and cost-effective manner. Fo- most among these technologies are electrochemical processes. While electrochemical technologies have been known and utilized for the tre- ment of wastewater containing heavy metal cations, the application of these p- cesses is only just a beginning to be developed for the oxidation of recalcitrant organic pollutants. In fact, only recently the electrochemical oxidation process has been rec- nized as an advanced oxidation process (AOP). This is due to the development of boron-doped diamond (BDD) anodes on which the oxidation of organic pollutants is mediated via the formation of active hydroxyl radicals.
Download or read book Encyclopedia of Sustainability Science and Technology written by Robert A. Meyers and published by Springer. This book was released on 2012-09-30 with total page 12555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Sustainability Science and Technology (ESST) addresses the grand challenge for science and engineering today. It provides unprecedented, peer-reviewed coverage in more than 550 separate entries comprising 38 topical sections. ESST establishes a foundation for the many sustainability and policy evaluations being performed in institutions worldwide. An indispensable resource for scientists and engineers in developing new technologies and for applying existing technologies to sustainability, the Encyclopedia of Sustainability Science and Technology is presented at the university and professional level needed for scientists, engineers, and their students to support real progress in sustainability science and technology. Although the emphasis is on science and technology rather than policy, the Encyclopedia of Sustainability Science and Technology is also a comprehensive and authoritative resource for policy makers who want to understand the scope of research and development and how these bottom-up innovations map on to the sustainability challenge.
Download or read book Electrochemical Surface Science Basics and Applications written by Gaetano Granozzi and published by MDPI. This book was released on 2019-10-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical surface science (EC-SS) is the natural advancement of traditional surface science (where gas–vacuum/solid interfaces are studied) to liquid (solution)/electrified solid interfaces. Such a merging between two different disciplines—i.e., surface science (SS) and electrochemistry—officially advanced ca. three decades ago. The main characteristic of EC-SS versus electrochemistry is the reductionist approach undertaken, inherited from SS and aiming to understand the microscopic processes occurring at electrodes on the atomic level. A few of the exemplary keystone tools of EC-SS include EC-scanning probe microscopies, operando and in situ spectroscopies and electron microscopies, and differential EC mass spectrometry (DEMS). EC-SS indirectly (and often unconsciously) receives a great boost from the requirement for rational design of energy conversion and storage devices for the next generation of energetic landscapes. As a matter of fact, the number of material science groups deeply involved in such a challenging field has tremendously expanded and, within such a panorama, EC and SS investigations are intimately combined in a huge number of papers. The aim of this Special Issue is to offer an open access forum where researchers in the field of electrochemistry, surface science, and materials science could outline the great advances that can be reached by exploiting EC-SS approaches. Papers addressing both the basic science and more applied issues in the field of EC-SS and energy conversion and storage materials have been published in this Special Issue.
Download or read book Chemical Sensors written by Peter Gründler and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of chemical and biochemical sensors and the development of respective applications is still growing rapidly. This book aims at instructing researcher and practitioners in both disciplines in a strictly systematic, interdisciplinary and practice-oriented way about the basic technology of chemical and biochemical sensors. This concise volume bridges the gap between the different "ways of thinking" in chemistry, physics and engineering. It provides a firm grounding for engineers, industrial and academic researcher in the field, for practitioners and novices as well as for advanced students.
Download or read book Handbook of Semiconductor Electrodeposition written by R.K. Pandey and published by CRC Press. This book was released on 2017-07-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aiming to bridge the gap in understanding between professional electrochemists and hard-core semiconductor physicists and material scientists, this book examines the science and technology of semiconductor electrode-positioning. Summarizing state-of-the-art information concerning a wide variety of semiconductors, it reviews fundamental electrodeposition concepts and terminology.
Download or read book Energy Harvesting Technologies written by Shashank Priya and published by Springer Science & Business Media. This book was released on 2008-11-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Harvesting Technologies provides a cohesive overview of the fundamentals and current developments in the field of energy harvesting. In a well-organized structure, this volume discusses basic principles for the design and fabrication of bulk and MEMS based vibration energy systems, theory and design rules required for fabrication of efficient electronics, in addition to recent findings in thermoelectric energy harvesting systems. Combining leading research from both academia and industry onto a single platform, Energy Harvesting Technologies serves as an important reference for researchers and engineers involved with power sources, sensor networks and smart materials.
Download or read book Physical Multiscale Modeling and Numerical Simulation of Electrochemical Devices for Energy Conversion and Storage written by Alejandro A. Franco and published by Springer. This book was released on 2015-11-12 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to review innovative physical multiscale modeling methods which numerically simulate the structure and properties of electrochemical devices for energy storage and conversion. Written by world-class experts in the field, it revisits concepts, methodologies and approaches connecting ab initio with micro-, meso- and macro-scale modeling of components and cells. It also discusses the major scientific challenges of this field, such as that of lithium-ion batteries. This book demonstrates how fuel cells and batteries can be brought together to take advantage of well-established multi-scale physical modeling methodologies to advance research in this area. This book also highlights promising capabilities of such approaches for inexpensive virtual experimentation. In recent years, electrochemical systems such as polymer electrolyte membrane fuel cells, solid oxide fuel cells, water electrolyzers, lithium-ion batteries and supercapacitors have attracted much attention due to their potential for clean energy conversion and as storage devices. This has resulted in tremendous technological progress, such as the development of new electrolytes and new engineering designs of electrode structures. However, these technologies do not yet possess all the necessary characteristics, especially in terms of cost and durability, to compete within the most attractive markets. Physical multiscale modeling approaches bridge the gap between materials’ atomistic and structural properties and the macroscopic behavior of a device. They play a crucial role in optimizing the materials and operation in real-life conditions, thereby enabling enhanced cell performance and durability at a reduced cost. This book provides a valuable resource for researchers, engineers and students interested in physical modelling, numerical simulation, electrochemistry and theoretical chemistry.
Download or read book Sustainable and Green Electrochemical Science and Technology written by Keith Scott and published by John Wiley & Sons. This book was released on 2017-07-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable and Green Electrochemical Science and Technology brings together the basic concepts of electrochemical science and engineering and shows how these are applied in an industrial context, emphasising the major role that electrochemistry plays within society and industry in providing cleaner, greener and more sustainable technologies. Electrochemistry has many applications for sustainability; it can be used to store energy, synthesise materials and chemicals, to generate power and to recycle valuable resources. Coverage includes Electrochemistry, Electrocatalysis and Thermodynamics Electrochemical Cells, Materials and Reactors Carbon Dioxide Reduction and Electro-Organic Synthesis Hydrogen production and Water Electrolysis Inorganic Synthesis Electrochemical Energy Storage and Power Sources Electrochemical processes for recycling and resource recovery Fuel Cell Technologies This book is targeted at both industrial and academic readers, providing a good technological reference base for electrochemistry. It will enable the reader to build on basic principles of electrochemistry, and takes these through to cell design for various and diverse applications.
Download or read book Electrochemistry of Carbon Electrodes written by Richard C. Alkire and published by John Wiley & Sons. This book was released on 2015-11-23 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book sets the standard on carbon materials for electrode design. For the first time, the leading experts in this field summarize the preparation techniques and specific characteristics together with established and potential applications of the different types of carbon-based electrodes. An introductory chapter on the properties of carbon together with chapters on the electrochemical characteristics and properties of the different modifications of carbon such as carbon nanotubes, graphene, carbon fiber, diamond or highly ordered pyrolytic graphite provide the reader with the basics on this fascinating and ubiquitous electrode material. Cutting-edge technologies such as carbon electrodes in efficient supercapacitors, Li-ion batteries and fuel cells, or electrodes prepared by screen-printing are discussed, giving a complete but concise overview about the topic. The clearly structured book helps newcomers to grasp easily the principles of carbon-based electrodes, while researchers in fundamental and applied electrochemistry will find new ideas for further research on related key technologies.
Download or read book Immunosensors written by Minhaz Uddin Ahmed and published by Royal Society of Chemistry. This book was released on 2019-08-28 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Immunosensors are widely used and are particularly important for fast diagnosis of diseases in remote environments as well as point-of-care devices. In this book, expert scientists are covering a selection of high quality representative examples from the past five years explaining how this area has developed. It is a compilation of recent advances in several areas of immunosensors for multiple target analysis using laboratory based or point-of-care set-up, for example graphene-, ISFET- and nanostructure-based immunosensors, electrochemical magneto immunosensors and nanoimprinted immunosensors. Filling a gap in the literature, it showcases the multidisciplinary, innovative developments in this highly important area and provides pointers towards commercialisation. Delivering a single, comprehensive work, it appeals to graduate students and professional researchers across academia and industry.
