Download or read book In situ Surface Science Studies of the Interaction Between Sulfur Dioxide and Two dimensional Palladium Loaded cerium zirconium Mixed Metal Oxide Model Catalysts written by Esteban Javier Romano and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Cerium and zirconium oxides are important materials in industrial catalysis. Particularly, the great advances attained in the past 30 years in controlling levels of gaseous pollutants released from internal combustion engines can be attributed to the development of catalysts employing these materials. Unfortunately, oxides of sulfur are known threats to the longevity of many catalytic systems by irreversibly interacting with catalytic materials over some time period. In this work, polycrystalline cerium-zirconium mixed-metal-oxide (MMO) solid solutions of various molar ratios were synthesized. High resolution x-ray photoelectron spectroscopy (XPS) was used to characterize the model system. The spectral data was examined for revelation of the surface species that form on these metal oxides after insitu exposures to sulfur dioxide at various temperatures. The model catalysts were exposed to sulfur dioxide using a custom modified in-situ reaction cell. A reliable sample platen heater was designed and built to allow the exposure of the model system at temperatures up to 673 K. The results of this study demonstrate the formation of sulfate and sulfite adsorbed sulfur species. Temperature and compositional dependencies were displayed, with higher temperatures and ceria molar ratios displaying a larger propensity for forming surface sulfur species. In addition to analysis of sulfur photoemission, the photoemission regions of oxygen, zirconium, and cerium were examined for the materials used in this study before and after the aforementioned treatments with sulfur dioxide. The presence of surface hydroxyl groups was observed and metal oxidation state changes were probed to further enhance the understanding of sulfur dioxide adsorption on the synthesized materials. Palladium loaded mixed-metal oxides were synthesized using a unique solid-state methodology to probe the effect of palladium addition on sulfur dioxide adsorption. Microscopic characterization of the wafers made using palladium-loaded MMO materials provide justification for using this material preparation method in surface science studies. The addition of palladium to this model system is shown to have a strong effect on the magnitude of adsorption for sulfur dioxide on some material/exposure condition combinations. Ceria/zirconia sulfite and sulfate species are identified on the palladium-loaded MMO materials with adsorption sites located on the exposed oxide sites.
Download or read book IN SITU SURFACE SCIENCE STUDIES OF THE INTERACTION BETWEEN SULFUR DIOXIDE AND TWO DIMENSIONAL PALLADIUM LOADED CERIUM ZIRCONIUM MIXED METAL OXIDE MODEL CATALYSTS written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Cerium and zirconium oxides are important materials in industrial catalysis. Particularly, the great advances attained in the past 30 years in controlling levels of gaseous pollutants released from internal combustion engines can be attributed to the development of catalysts employing these materials. Unfortunately, oxides of sulfur are known threats to the longevity of many catalytic systems by irreversibly interacting with catalytic materials over some time period. In this work, polycrystalline cerium-zirconium mixed-metal-oxide (MMO) solid solutions of various molar ratios were synthesized. High resolution x-ray photoelectron spectroscopy (XPS) was used to characterize the model system. The spectral data was examined for revelation of the surface species that form on these metal oxides after insitu exposures to sulfur dioxide at various temperatures. The model catalysts were exposed to sulfur dioxide using a custom modified in-situ reaction cell. A reliable sample platen heater was designed and built to allow the exposure of the model system at temperatures up to 673 K. The results of this study demonstrate the formation of sulfate and sulfite adsorbed sulfur species. Temperature and compositional dependencies were displayed, with higher temperatures and ceria molar ratios displaying a larger propensity for forming surface sulfur species. In addition to analysis of sulfur photoemission, the photoemission regions of oxygen, zirconium, and cerium were examined for the materials used in this study before and after the aforementioned treatments with sulfur dioxide. The presence of surface hydroxyl groups was observed and metal oxidation state changes were probed to further enhance the understanding of sulfur dioxide adsorption on the synthesized materials. Palladium loaded mixed-metal oxides were synthesized using a unique solid-state methodology to probe the effect of palladium addition on sulfur dioxide adsorption. Microscopic characterization of the wafers made us.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.
Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.
Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.
Download or read book Nanotechnology in Catalysis 3 written by Bing Zhou and published by Springer Science & Business Media. This book was released on 2007-09-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume continues the tradition formed in Nanotechnology in Catalysis 1 and 2. As with those books, this one is based upon an ACS symposium. Some of the most illustrious names in heterogeneous catalysis are among the contributors. The book covers: Design, synthesis, and control of catalysts at nanoscale; understanding of catalytic reaction at nanometer scale; characterization of nanomaterials as catalysts; nanoparticle metal or metal oxides catalysts; nanomaterials as catalyst supports; new catalytic applications of nanomaterials.
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2002-09-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting results are still emerging from the many research groups working in this fertile area and the book is an excellent stimulus to researchers at the start of the 21st century."--BOOK JACKET.
Download or read book Electrochemistry of Metal Chalcogenides written by Mirtat Bouroushian and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides a unified account of the electrochemical material science of metal chalcogenide (MCh) compounds and alloys with regard to their synthesis, processing and applications. Starting with the chemical fundamentals of the chalcogens and their major compounds, the initial part of the book includes a systematic description of the MCh solids on the basis of the Periodic Table in terms of their structures and key properties. This is followed by a general discussion on the electrochemistry of chalcogen species, and the principles underlying the electrochemical formation of inorganic compounds/alloys. The core of the book offers an insight into available experimental results and inferences regarding the electrochemical preparation and microstructural control of conventional and novel MCh structures. It also aims to survey their photoelectrochemistry, both from a material-oriented point of view and as connected to specific processes such as photocatalysis and solar energy conversion. Finally, the book illustrates the relevance of MCh materials to various applications of electrochemical interest such as (electro)catalysis in fuel cells, energy storage with intercalation electrodes, and ion sensing.
Download or read book Plasma Electrolytic Oxidation PEO Coatings written by Marta Mohedano and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO), functionalizes surfaces, improving the mechanical, thermal, and corrosion performance of metallic substrates, along with other tailored properties (e.g., biocompatibility, catalysis, antibacterial response, self-lubrication, etc.). The extensive field of applications of this technique ranges from structural components, in particular, in the transport sector, to more advanced fields, such as bioengineering. The present Special Issue covers the latest advances in PEO‐coated light alloys for structural (Al, Mg) and biomedical applications (Ti, Mg), with 10 research papers and 1 review from leading research groups around the world.
Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.
Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.
