Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 2008-01-01 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-situ air sparging (IAS) is a rapidly emerging remediation technology for treatment of contaminants in saturated zone soils and groundwater. Injection below the water table of air, pure oxygen, or other gases may result in removal of contaminants by volatilization or bioremediation. Less commonly, IAS can be used to immobilize contaminants through chemical changes such as precipitation. This Engineer Manual (EM) provides guidance for evaluation of the feasibility and applicability of IAS for remediation of contaminated groundwater and soil and, as a secondary objective, describes design and operational considerations for IAS systems.
Download or read book MTBE Remediation Handbook written by Ellen Moyer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive and up-to date compendium of the technology and management of MTBE contamination, exploring the myths which impede successful clean-up techniques, and offering effective solutions. Section I looks at the history, properties, occurrence and assessment of MTBE. Section II discusses applicable remediation technologies. Section III offers remediation case studies.
Download or read book Abiotic in Situ Technologies for Groundwater Remediation Conference written by and published by . This book was released on 2000 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technologies for Treating MTBE and Other Fuel Oxygenates written by and published by . This book was released on 2004 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Groundwater Hydrology written by Mohammad Karamouz and published by CRC Press. This book was released on 2020-03-20 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing demand for water, higher standards of living, depletion of resources of acceptable quality, and excessive water pollution due to urban, agricultural, and industrial expansions have caused intense environmental, social, economic, and political predicaments. More frequent and severe floods and droughts have changed the resiliency and ability of water infrastructure systems to operate and provide services to the public. These concerns and issues have also changed the way we plan and manage our surface and groundwater resources. Groundwater Hydrology: Engineering, Planning, and Management, Second Edition presents a compilation of the state-of-the-art subjects and techniques in the education and practice of groundwater and describes them in a systematic and integrated fashion useful for undergraduate and graduate students and practitioners. This new edition features updated materials, computer codes, and case studies throughout. Features: Discusses groundwater hydrology, hydraulics, and basic laws of groundwater movement Describes environmental water quality issues related to groundwater, aquifer restoration, and remediation techniques, as well as the impacts of climate change \ Examines the details of groundwater modeling and simulation of conceptual models Applies systems analysis techniques in groundwater planning and management Delineates the modeling and downscaling of climate change impacts on groundwater under the latest IPCC climate scenarios Written for students as well as practicing water resource engineers, the book develops a system view of groundwater fundamentals and model-making techniques through the application of science, engineering, planning, and management principles. It discusses the classical issues in groundwater hydrology and hydraulics followed by coverage of water quality issues. It also introduces basic tools and decision-making techniques for future groundwater development activities, taking into account regional sustainability issues. The combined coverage of engineering and planning tools and techniques, as well as specific challenges for restoration and remediation of polluted aquifers sets this book apart.
Download or read book Groundwater Hydrology written by M. Karamouz and published by CRC Press. This book was released on 2011-03-15 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing demand for water, higher standards of living, depletion of resources of acceptable quality, and excessive water pollution due to urban, agricultural, and industrial expansions have caused intense environmental, social, economic, and political predicaments. More frequent and severe floods and droughts have changed the ability and resiliency of water infrastructure systems to operate and provide services to the public. These concerns and issues have also changed the way we plan and manage our surface and groundwater resources. Groundwater Hydrology: Engineering, Planning, and Management presents a compilation of the state-of-the-art subjects and techniques in the education and practice of groundwater and describes them in a systematic and integrated fashion useful for undergraduate and graduate students and practitioners. The book develops a system view of groundwater fundamentals and model-making techniques through the application of science, engineering, planning, and management principles. It discusses the classical issues in groundwater hydrology and hydraulics followed by coverage of water quality issues. The authors delineate the process of analyzing data, identification, and parameter estimation; tools and model-building techniques and the conjunctive use of surface and groundwater techniques; aquifer restoration, remediation, and monitoring techniques; and analysis of risk. They touch on groundwater risk and disaster management and then explore the impact of climate change on groundwater and discuss the tools needed for analyzing future data realization and downscaling large-scale low-resolution data to local watershed and aquifer scales for impact studies. The combined coverage of engineering and planning tools and techniques as well as specific challenges for restoration and remediation of polluted aquifers sets this book apart. It also introduces basic tools and techniques for making decisions about and planning for future groundwater development activities, taking into account regional sustainability issues. An examination of the interface between groundwater challenges, the book demonstrates how to apply systems analysis techniques to groundwater engineering, planning, and management.
Download or read book Handbook of Advanced Industrial and Hazardous Wastes Treatment written by Lawrence K. Wang and published by CRC Press. This book was released on 2009-11-04 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most industrial and hazardous waste management resources cover the major industries and provide conventional in-plant pollution control strategies. Until now however, no book or series of books has provided coverage that includes the latest developments in innovative and alternative environmental technology, design criteria, managerial decision met
Download or read book Groundwater Resources written by Neven Kresic and published by McGraw Hill Professional. This book was released on 2008-07-31 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: An All-Inclusive Guide to Efficient, Cost-Effective Management of Groundwater Resources Groundwater Sustainability is a reliable, one-stop guide containing all the information you'll need to succeed in your groundwater management and development projects. It covers virtually every aspect of the subject, from how to characterize groundwater and evaluate its resources to determining the interactions between surface water and groundwater. Packed with hundreds of illustrations, this expansive guide reviews both established and innovative aquifer restoration techniques and technologies, including the control and remediation of contaminant sources and groundwater contaminant plumes. You'll also find valuable information regarding resource augmentation, the engineering necessary for resource development, and building comprehensive databases for efficient, cost-effective assessment. Written in an inviting-to-read style by a recognized expert in the field, Groundwater Sustainability provides the last word on the all-important subject of how to maintain and manage the most precious natural resource. Inside: In-depth coverage of groundwater availability and sustainability Treatment options for groundwater contaminants Tools and techniques for effectively managing aquifers Proven tactics for protecting and restoring groundwater resources Case studies, figures, graphs, and photographs Tips on building assessment models using a GIS platform This all-in-one guide covers: Global Freshwater Resources Aquifer Evaluation Groundwater Resource Development Groundwater Recharge Climate Change and Its Impact on Groundwater Groundwater Chemistry Drinking Water Treatment Options Managing & Restoring Groundwater Resources
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 2002-06-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides practical guidance for the design and operation of soil vapor extraction (SVE) and bioventing (BV) systems. It is intended for use by engineers, geologists, hydrogeologists, and soil scientists, chemists, project managers, and others who possess a technical education and some design experience but only the broadest familiarity with SVE or BV systems.
Download or read book Emerging and Eco Friendly Approaches for Waste Management written by Ram Naresh Bharagava and published by Springer. This book was released on 2018-05-25 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid industrialization is a serious concern in the context of a healthy environment. With the growth in the number of industries, the waste generated is also growing exponentially. The various chemical processes operating in the manufacturing industry generate a large number of by-products, which are largely harmful and toxic pollutants and are generally discharged into the natural water bodies. Once the pollutants enter the environment, they are taken up by different life forms, and because of bio-magnification, they affect the entire food chain and have severe adverse effects on all life forms, including on human health. Although, various physico-chemical and biological approaches are available for the removal of toxic pollutants, unfortunately these are often ineffective and traditional clean up practices are inefficient. Biological approaches utilizing microorganisms (bacterial/fungi/algae), green plants or their enzymes to degrade or detoxify environmental pollutants such as endocrine disruptors, toxic metals, pesticides, dyes, petroleum hydrocarbons and phenolic compounds, offer eco- friendly approaches. Such eco-friendly approaches are often more effective than traditional practices, and are safe for both industry workers as well as environment. This book provides a comprehensive overview of various toxic environmental pollutants from a variety natural and anthropogenic sources, their toxicological effects on the environment, humans, animals and plants as well as their biodegradation and bioremediation using emerging and eco-friendly approaches (e.g. Anammox technology, advanced oxidation processes, membrane bioreactors, membrane processes, GMOs), microbial degradation (e.g. bacteria, fungi, algae), phytoremediation, biotechnology and nanobiotechnology. Offering fundamental and advanced information on environmental problems, challenges and bioremediation approaches used for the remediation of contaminated sites, it is a valuable resource for students, scientists and researchers engaged in microbiology, biotechnology and environmental sciences.
Download or read book Steam Injection for Soil and Aquifer Remediation written by Eva L. Davis and published by . This book was released on 1998 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Selected Enhancements for Soil Vapor Extraction written by and published by DIANE Publishing. This book was released on 1997 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides an engineering analysis of, and status report on, selected enhancements for soil vapor extraction (SVE) treatment technologies. The report is intended to assist project managers considering an SVE treatment system by providing them with an up-to-date status of enhancement technologies; an evaluation of each technology's applicability to various site conditions; a presentation of cost and performance information; a list of vendors specializing in the technologies; a discussion of relative strengths and limitations of the technologies; recommendations to keep in mind when considering the enhancements; and a compilation of references. The performance of an SVE system depends on properties of both the contaminants and the soil. SVE is generally applicable to compounds with a vapor pressure of greater than 1 millimeter of mercury at 20EC and a Henry s Law constant of greater than 100 atmospheres per mole fraction. SVE is most effective at sites with relatively permeable contaminated soil and with saturated hydraulic conductivities of greater than 1 x 10 or 1 x 10 centimeter per second (cm/s). SVE by itself does not effectively remove contaminants -3 -2 in saturated soil. However, SVE can be used as an integral part of some treatment schemes that treat both groundwater and the overlying vadose zone. Enhancement technologies should be considered when contaminant or soil characteristics limit the effectiveness of SVE or when contaminants are present in saturated soil. The five enhancement technologies covered in this report are as follows and are described in the following subsections: * Air Sparging * Dual-phase Extraction * Directional Drilling * Pneumatic and Hydraulic Fracturing * Thermal Enhancement.
Download or read book In situ Air Sparging Engineering and Design EM 1110 1 4005 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Clinical Emergency Medicine written by S. V. Mahadevan and published by Cambridge University Press. This book was released on 2012-04-10 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully-updated edition of this award-winning textbook, arranged by presenting complaints with full-color images throughout. For students, residents, and emergency physicians.
Download or read book Handbook of Industrial and Hazardous Wastes Treatment written by Lawrence K. Wang and published by CRC Press. This book was released on 2004-06-29 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting effective, practicable strategies modeled from ultramodern technologies and framed by the critical insights of 78 field experts, this vastly expanded Second Edition offers 32 chapters of industry- and waste-specific analyses and treatment methods for industrial and hazardous waste materials-from explosive wastes to landfill leachate to w
Download or read book Remediation Case Studies written by and published by . This book was released on 1995 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Soil Venting Application written by Dominic C. DiGiulio and published by . This book was released on 1992 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
