Download or read book Biofiber Reinforcements in Composite Materials written by Omar Faruk and published by Elsevier. This book was released on 2014-09-25 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber-reinforced composites have the potential to replace synthetic composites, leading to less expensive, stronger and more environmentally-friendly materials. This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance. The book is divided into five major parts according to the origins of the different biofibers. Part I contains chapters on bast fibers, Part II; leaf fibers, Part III; seed fibers, Part IV; grass, reed and cane fibers, and finally Part V covers wood, cellulosic and other fibers including cellulosic nanofibers. Each chapter reviews a specific type of biofiber providing detailed information on the sources of each fiber, their cultivation, how to process and prepare them, and how to integrate them into composite materials. The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses. - The book is divided into five major parts according to the origins of the different biofibers - bast, leaf, seed; grass, reed and cane fibers, and finally wood, cellulosic and other fibers including cellulosic nanofibers. - This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance - The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses

Download or read book Lignocellulosic Fibre and Biomass Based Composite Materials written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2017-06-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosic Fibre and Biomass-Based Composite Materials reviews the development, characterization and applications of composite materials developed from the effective use of lignocellulosic fibre and biomass. The book gathers together a wide spectrum of cutting-edge research on biomass fillers and reinforcements used for the fabrication and synthesis of composites. The book takes a systematic approach, investigating processing, design, characterization and applications of biocomposites, in order to establish their important relationship as a general guideline for end-user applications. Beginning with an introduction to biomass and its composites, a team of leading experts in the field cover rice husk, kenaf, oil palm, alfa and doum fibres, bamboo, cork, and many other materials, considering a range of applications, along with key issues such as performance and sustainability. The groundbreaking research presented opens the door to obtaining advanced material characteristics and significant enhancements in physical, mechanical, and thermal properties. This will be become an extremely useful reference and technical guide for academic and industrial researchers in composite materials, as well as for advanced students and industrialists working in material commercialization. - Gathers together a wide spectrum of research on lignocellulosic fiber and biomass fillers and reinforcements used for the fabrication and synthesis of composites - Presents multidisciplinary work in relation to materials engineering, polymer chemistry and physics, materials processing, organic synthesis and industrial design and applications - Demonstrates systematic approaches and investigations from processing, design, characterization and applications of biocomposites

Download or read book Advances in Materials and Manufacturing written by K. Palanikumar and published by Trans Tech Publications Ltd. This book was released on 2015-06-08 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer reviewed papers from the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME-2014), December 19-20, 2014, Chennai, India

Download or read book Recycled Polymer Blends and Composites written by Hanafi Ismail and published by Springer Nature. This book was released on 2023-10-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative account of the potential of recycled polymer blends and composites such as recycled rubber, Polypropylene, Poly(Vinylidene Fluoride) (PVDF), polyhydroxybutyrate-3-valerate (PHBV), Polyethylene, and similar compounds, in polymer recycling industries. It highlights the latest research on fundamentals of recycled polymer blends and composites such as physical, chemical, mechanical and thermal properties and morphological studies. The book also provides a comprehensive state of the art review of recycling of polymer blends and composites for sustainability. Polymeric substances recycled from excess sludge in wastewater treatment plants, reinsertion of Poly(Vinylidene Fluoride) (PVDF), polyolefin and Polypropylene post-Industrial waste by primary recycling, as well as the recent development of biomass and COVID-19 plastic waste derived char filled natural starch biocomposite briquettes are also covered.

Download or read book Emerging Trends in Mechanical and Industrial Engineering written by Xianguo Li and published by Springer Nature. This book was released on 2023-01-01 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the International Conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE 2022). It covers the latest trends in the area of mechanical engineering. The broad topics covered in the book are engineering design, industrial and production engineering, Industry 4.0, energy and process engineering, mechatronics, control and robotics, material science, and automotive engineering. The book is useful for students, researchers, and professionals working in the various areas of mechanical engineering.

Download or read book The Vibrational Spectroscopy of Polymers written by D. I. Bower and published by Cambridge University Press. This book was released on 1992-07-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the theory and practice of infrared and Raman spectroscopy as applied to the study of the physical and chemical characteristics of polymers. Its purpose is to give the beginning researcher in the field a firm foundation and a starting point for the study of more advanced literature. To this end the book concentrates on the fundamentals of the theory and nomenclature, and on the discussion of well-documented illustrations of these fundamental principles, including many now-classic studies in the subject. No previous knowledge of either polymers or vibrational spectroscopy is assumed.

Download or read book Processing and Fabrication of Advanced Materials Volume 1 written by Ajay Kumar and published by Springer Nature. This book was released on with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trends in Materials Engineering written by Inderdeep Singh and published by Springer. This book was released on 2019-07-12 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2018). The book includes latest research on conventional materials, advanced metals and alloys, polymeric materials and composites. In addition to the characterization of different advanced materials, the book also discusses their applications in various fields such as marine, automotive, aerospace, sporting equipment, and infrastructure. The book offers an insight into the manufacturing of cost-effective and high performance materials products. The contents of this book will be useful for students, academicians, and researchers working in the field of materials science and engineering.

Download or read book Advances in Bio Based Fiber written by Sanjay Mavinkere Rangappa and published by Woodhead Publishing. This book was released on 2021-12-01 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Bio-Based Fibres: Moving Towards a Green Society describes many novel natural fibers, their specific synthesis and characterization methods, their environmental sustainability values, their compatibility with polymer composites, and a wide range of innovative commercial engineering applications. As bio-based fiber polymer composites possess excellent mechanical, electrical and thermal properties, along with highly sustainable properties, they are an important technology for manufacturers and materials scientists seeking to improve the sustainability of their industries. This cutting-edge book draws on the latest industry practice and academic research to provide advice on technologies with applications in industries, including packaging, automotive, aerospace, biomedical and structural engineering. - Provides technical data on advanced material properties, including electrical and rheological - Gives a comprehensive guide to appraising and applying this technology to improve sustainability, including lifecycle assessment and recyclability - Includes advice on the latest modeling techniques for designing with these materials

Download or read book Natural and Wood Fibre Reinforcement in Polymers written by A. K. Bledzki and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the different fibre types available and the current research. The authors have cited several hundred references to the latest work on properties, processing and applications. The different methods of fibre pretreatment are examined, together with fibre properties, chemistry and applications. This review is accompanied by summaries of papers from the Rapra Polymer Library database.

Download or read book Fiber Reinforced Nanocomposites Fundamentals and Applications written by Baoguo Han and published by Elsevier. This book was released on 2020-03-13 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced Nanocomposites: Fundamentals and Applications explores the fundamental concepts and emerging applications of fiber-reinforced nanocomposites in the automobile, aerospace, transportation, construction, sporting goods, optics, electronics, acoustics and environmental sector. In addition, the book provides a detailed overview of the properties of fiber-reinforced nanocomposites, including discussion on embedding these high-strength fibers in matrices. Due to the mismatch in structure, density, strain and thermal expansion coefficients between matrix and fibers, their thermo-mechanical properties strongly depend not only on the preparative methods, but also on the interaction between reinforcing phase and matrix phase. This book offers a concise overview of these advances and how they are leading to the creation of stronger, more durable classes of nanocomposite materials. - Explores the interaction between fiber, nanoreinforcers and matrices at the nanoscale - Shows how the properties of fiber-enforced nanocomposites are ideal for use for a variety of consumer products - Outlines the major challenges to creating fiber-reinforced nanocomposites effectively

Download or read book Green Composites from Natural Resources written by Vijay Kumar Thakur and published by CRC Press. This book was released on 2013-11-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global awareness of environmental issues has resulted in the emergence of economically and environmentally friendly bio-based materials free from the traditional side effects of synthetics. This book delivers an overview of the advancements made in the development of biorenewable resources-based materials, including processing methods and potential applications in bio-based green composites. Covering various kinds of cellulosic biofibers, the text provides information on more eco-friendly and sustainable alternatives to synthetic polymers and discusses the present state and growing utility of green materials from natural resources.

Download or read book Advances in Sustainable Polymer Composites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2020-09-02 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Sustainable Polymer Composites reviews recent scientific findings on the production and use of sustainable polymers and composites as innovative new materials. The book discusses the importance of sustainable polymers in terms of current practices and how to address environmental and economic issues. Attention is focused on the physical, chemical and electrical properties of these composites. The book also looks at the lifecycle of both single and hybrid polymers and nanocomposites, with chapters covering the latest research findings on sustainable polymer composites with various filler loadings and their improvement on compatibility. From the viewpoint of polymer composites, this book covers not only well-known sustainable future trends in sustainable polymers and composites, but also advanced materials produced from micro, nano and pico-scale fillers that achieve better physical and mechanical results. - Features advanced materials produced from micro, nano and pico-scale fillers - Emphasizes the modeling and prediction of thermal, rheological and mechanical behavior - Covers various types of fillers and different reinforcement agents - Focuses on all aspects of fabrication, characterization and applications - Addresses sustainability approaches and solutions

Download or read book Lignocellulosic Polymer Composites written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2014-10-30 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents emerging economic and environmentally friendly lignocellulosic polymer composites materials that are free from side effects studied in the traditional synthetic materials. This book brings together panels of highly-accomplished leading experts in the field of lignocellulosic polymers & composites from academia, government, as well as research institutions across the globe and encompasses basic studies including preparation, characterization, properties and theory of polymers along with applications addressing new emerging topics of novel issues. Provide basic information and clear understanding of the present state and the growing utility of lignocellulosic materials from different natural resources Includes contributions from world-renowned experts on lignocellulosic polymer composites and discusses the combination of different kinds of lignocellulosic materials from natural resources Discusses the fundamental properties and applications of lignocellulosic polymers in comparison to traditional synthetic materials Explores various processing/ mechanical/ physic-chemical aspects of lignocellulosic polymer composites

Download or read book Cellulose Fibre Reinforced Composites written by R. Arun Ramnath and published by Woodhead Publishing. This book was released on 2022-10-29 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellulose Fibre Reinforced Composites: Interface Engineering, Processing and Performance provides an up-to-date review of current research in cellulose fiber reinforced polymer composites. Key emphasis is placed on interface engineering, modern technologies needed for processing and materials performance in industrial applications. Novel techniques for interfacial adhesion, characterization and assessment of cellulose fiber reinforced composites are also discussed, along with current trends and future directions. With contributions from leading researchers in industry, academic, government and private research institutions from across the globe, the book will be an essential reference resource for all those working in the field of cellulose fibers and their composites. - Reviews advances in recent research towards enhancing the mechanical properties of cellulose fiber composites - Discusses interface engineering and modern technologies needed for processing cellulose fiber composites - Includes case studies of problems with interfaces and practical industrial applications

Download or read book Hybrid Natural Fiber Composites written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-01-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on natural fiber composites is an emerging area in the field of polymer science with tremendous growth potential for commercialization. Hybrid Natural Fiber Composites: Material Formulations, Processing, Characterization, Properties, and Engineering Applications provides updated information on all the important classes of natural fibers and their composites that can be used for a broad range of engineering applications. Leading researchers from industry, academia, government, and private research institutions from across the globe have contributed to this highly application-oriented book. The chapters showcase cutting-edge research discussing the current status, key trends, future directions, and opportunities. Focusing on the current state of the art, the authors aim to demonstrate the future potential of these materials in a broad range of demanding engineering applications. This book will act as a one-stop reference resource for academic and industrial researchers working in R&D departments involved in designing composite materials for semi structural engineering applications. - Presents comprehensive information on the properties of hybrid natural fiber composites that demonstrate their ability to improve the hydrophobic nature of natural fiber composites - Reviews recent developments in the research and development of hybrid natural fiber composites in various engineering applications - Focuses on modern technologies and illustrates how hybrid natural fiber composites can be used as alternatives in structural components subjected to severe conditions

Download or read book Polyester Based Biocomposites written by Senthilkumar Krishnasamy and published by CRC Press. This book was released on 2023-09-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyester-Based Biocomposites highlights the performance of polyester-based biocomposites reinforced with various natural fibres extracted from leaf, stem, fruit bunch, grass and wood material. It also addresses the characteristics of polyester-based biocomposites reinforced with rice husk fillers and various nanoparticles. This book explores the widespread applications of fibre-reinforced polymer composites in the aerospace sector, automotive parts, construction and building materials, sports equipment and household appliances. Investigating the advantages of natural fibres, such as superior damping characteristics, low density, biodegradability, abundant availability at low cost and non-abrasive to tooling, this book discusses what makes them a cost-effective alternative reinforcement material for composites in certain applications. This book serves as a useful reference for researchers, graduate students and engineers in the field of polymer composites.