Download or read book Energy Efficiency and Historic Buildings written by Iain McCaig and published by . This book was released on 2018-06-15 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance is for anyone who wishes to improve energy efficiency in an historic building. There are many reasons to do this. Improving energy efficiency will lower carbon emissions and fuel bills and often increase comfort. It also might be necessary to ensure that a building complies with legal requirements. More broadly, improving energy efficiency forms a part of the wider objective to achieve a sustainable environment. It is a widely held view that older buildings are not energy-efficient, and must be radically upgraded in order to improve their performance. In reality, the situation is more complicated, and assumptions about poor performance are not always justified. Even so, the energy and carbon performance of most historic buildings can be improved, which will help them remain viable and useful, now and in the future. But striking the right balance between benefit and harm is not easy. The unintended consequences of getting energy efficiency measures wrong (or doing them badly) include: harm to heritage values and significance, harm to human health and building fabric, and failure to achieve the predicted savings or reductions in environmental impact. Getting the balance right (and avoiding unintended consequences) is best done with a holistic approach that uses an understanding of a building, its context, its significance, and all the factors affecting energy use as the starting point for devising an energy-efficiency strategy. This 'whole building approach' ensures that energy-efficiency measures are suitable, robust, well integrated, properly coordinated and sustainable. In addition, this approach provides an effective framework for communication and understanding between the various parties involved in the process. These include assessors, designers, installers and the people who occupy and manage the building. A logical and systematic process of energy planning underpins the 'whole building approach'. This guidance describes the key stages of the process, illuminating any problems that might occur and providing solutions. It also includes checklists of practical measures that might be considered, along with links to sources of more detailed information about how to install these measures.

Download or read book Energy Efficiency Solutions for Historic Buildings written by Alexandra (EURAC research) Troi and published by Birkhäuser. This book was released on 2014-12-17 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook holistically summarises the principles for the energy retrofitting of historic buildings, from the first diagnosis to the adequately designed intervention: preservation of the historic structure, user comfort, and energy efficiency. The content was developed by an interdisciplinary team of researchers. The wide range of different expertise, design examples, calculations, and measuring results from eight case studies makes this manual an indispensable tool for all architects, engineers, and energy consultants.

Download or read book Improving Energy Efficiency in Historic Buildings written by Jo Ellen Hensley and published by Government Printing Office. This book was released on 2012-01-17 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT -- OVERSTOCK SALE -- Significantly reduced list price Helps property owners, preservation professionals, and stewards of historic buildings make informed decisions when considering energy efficiency improvements to historic buildings. This brief targets primarily small-to medium-size historic buildings, both residential and commercial. However, the general decision-making principles outlined here apply to buildings of any size and complexity. This guidance is provided in accordance with the Secretary of the Interior's Standards for Rehabilitation to ensure that the architectural integrity of the historic property is preserved. Other related products: A Do-It-Yourself Guide to Sealing and Insulating With Energy Star: Sealing Air Leaks and Adding Attic Insulation is available here: https: //bookstore.gpo.gov/products/sku/055-000-00684-9 Preservation Briefs: 15-23 (2007) is available here: https: //bookstore.gpo.gov/products/sku/024-005-01256-7 The Seismic Rehabilitation of Historic Buildings is available here: https: //bookstore.gpo.gov/products/sku/024-005-01322-9 Renovation & Historic Preservation resources collection can be found here: https: //bookstore.gpo.gov/catalog/science-technology/construction-archit..."

Download or read book Energy Efficiency in Buildings written by José Manuel Andújar and published by MDPI. This book was released on 2020-04-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed.

Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.

Download or read book Cost Effective Energy Efficient Building Retrofitting written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2017-01-03 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost-Effective Energy Efficient Building Retrofitting:Materials, Technologies, Optimization and Case Studies provides essential knowledge for civil engineers, architects, and other professionals working in the field of cost-effective energy efficient building retrofitting. The building sector is responsible for high energy consumption and its global demand is expected to grow as each day there are approximately 200,000 new inhabitants on planet Earth. The majority of electric energy will continue to be generated from the combustion of fossil fuels releasing not only carbon dioxide, but also methane and nitrous oxide. Energy efficiency measures are therefore crucial to reduce greenhouse gas emissions of the building sector. Energy efficient building retrofitting needs to not only be technically feasible, but also economically viable. New building materials and advanced technologies already exist, but the knowledge to integrate all active components is still scarce and far from being widespread among building industry stakeholders. - Emphasizes cost-effective methods for the refurbishment of existing buildings, presenting state-of-the-art technologies - Includes detailed case studies that explain various methods and Net Zero Energy - Explains optimal analysis and prioritization of cost effective strategies

Download or read book Old House Eco Handbook written by Roger Hunt and published by White Lion Publishing. This book was released on 2019-09-17 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: How should we go about making old houses energy efficient without devaluing future sustainability or the appeal and character of old homes by the use of inappropriate solutions? This practical and essential guide to retrofitting for energy efficiency seeks to provide answers to this and other the questions homeowners of old houses are asking. Whether your house is medieval and timber-framed or a Georgian, Victorian or Edwardian terrace, it can be made more energy efficient and sustainable, and this practical and comprehensive handbook will show you how. Revised and updated throughout, and with a foreword by Kevin McLoud, Old House Eco Handbook includes chapters on the building envelope; roofs and ceilings; windows and doors; walls; floors; paints; energy, airandwater; plus a brand newchapter on retrofit materials. In association with The Society for the Protection of Ancient Buildings, this is a must have for owners of old houses looking to make their homes more energy efficient and sustainable. Chapters Include: 1. Old houses can be green 2. Old house to eco house 3. The building envelope 4. Retrofit materials 5. Roofs and ceilings 6. Windows and doors 7. Walls 8. Floors 9. Paints 10. Energy, air and water 11. Old house for the future

Download or read book Building Services Design for Energy Efficient Buildings written by Paul Tymkow and published by Taylor & Francis. This book was released on 2020-07-12 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role and influence of building services engineers are undergoing rapid change and are pivotal to achieving low-carbon buildings. However, textbooks in the field have tended to remain fairly traditional with a detailed focus on the technicalities of heating, ventilation and air conditioning (HVAC) systems, often with little wider context. This book addresses that need by embracing a contemporary understanding of the urgent challenge to address climate change, together with practical approaches to energy efficiency and carbon mitigation for mechanical and electrical systems, in a concise manner. The essential conceptual design issues for planning the principal building services systems that influence energy efficiency are examined in detail. These are HVAC and electrical systems. In addition, the following issues are addressed: background issues on climate change, whole-life performance and design collaboration generic strategies for energy efficient, low-carbon design health and wellbeing and post occupancy evaluation building ventilation air conditioning and HVAC system selection thermal energy generation and distribution systems low-energy approaches for thermal control electrical systems, data collection, controls and monitoring building thermal load assessment building electric power load assessment space planning and design integration with other disciplines. In order to deliver buildings that help mitigate climate change impacts, a new perspective is required for building services engineers, from the initial conceptual design and throughout the design collaboration with other disciplines. This book provides a contemporary introduction and guide to this new approach, for students and practitioners alike.

Download or read book Smart Buildings written by Marco Casini and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Buildings: Advanced Materials and Nanotechnology to Improve Energy Efficiency and Environmental Performance presents a thorough analysis of the latest advancements in construction materials and building design that are applied to maximize building efficiency in both new and existing buildings. After a brief introduction on the issues concerning the design process in the third millennium, Part One examines the differences between Zero Energy, Green, and Smart Buildings, with particular emphasis placed on the issue of smart buildings and smart housing, mainly the 'envelope' and how to make it more adaptive with the new possibilities offered by nanotechnology and smart materials. Part Two focuses on the last generation of solutions for smart thermal insulation. Based on the results of extensive research into more innovative insulation materials, chapters discuss achievements in nanotechnology, bio-ecological, and phase-change materials. The technical characteristics, performance level, and methods of use for each are described in detail, as are the achievements in the field of green walls and their use as a solution for upgrading the energy efficiency and environmental performance of existing buildings. Finally, Part Three reviews current research on smart windows, with the assumption that transparent surfaces represent the most critical element in the energy balance of the building. Chapters provide an extensive review on the technical features of transparent closures that are currently on the market or under development, from so-called dynamic glazing to bio-adaptive and photovoltaic glazing. The aesthetic potential and performance limits are also be discussed. - Presents valuable definitions that are given to explain the characteristics, requirements, and differences between 'zero energy', 'green' and 'smart' buildings - Contains particular focus on the next generation of construction materials and the most advanced products currently entering the market - Lists both the advantages and disadvantages to help the reader choose the most suitable solution - Takes into consideration both design and materials aspects - Promotes the existence of new advanced materials providing technical information to encourage further use and reduce costs compared to more traditional materials

Download or read book Energy Efficiency and Historic Buildings written by David Pickles and published by . This book was released on 2015-05-14 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance is aimed at homeowners and those managing or renting historic or older domestic buildings who may need to commission an Energy Performance Certificate (EPC) or who have received one for an older property that has been purchased or rented. Details are provided on the type of information included in an EPC, how it is calculated, and its limitations as an assessment method when applied to older buildings. The guidance also covers the issues to be taken into account when commissioning an EPC and considering its recommendations. Almost every older building can accommodate some energy improvements without harming either its special interest or environmental performance. However, an appropriate balance needs to be achieved between building conservation and measures to improve energy efficiency if lasting damage is to be avoided both to a building’s character and significance and its fabric.

Download or read book Improving Energy Efficiency and Reducing Emissions through Intelligent Railway Station Buildings written by Asian Development Bank and published by Asian Development Bank. This book was released on 2015-09-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings in the People's Republic of China (PRC) consume 21% of the total energy produced in the country. This study analyzes and proposes feasible energy-saving and emission-reducing solutions for domestic railway stations in the PRC. The use of intelligent building controls support reduction of energy consumption, minimization or elimination of energy wastes, and cost savings. Strong institutional mechanisms and railway building management methods and policies also promote technological innovation. Moreover, these are necessary to balance the interests of multiple parties to be able to achieve energy efficiency in railway station buildings in the PRC.

Download or read book Sustainability in Energy and Buildings 2020 written by John Littlewood and published by Springer Nature. This book was released on 2020-12-07 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 12th KES International Conference on Sustainability and Energy in Buildings 2020 (SEB20) held in Split, Croatia, during 24–26 June 2020 organized by KES International. SEB20 invited contributions on a range of topics related to sustainable buildings and explored innovative themes regarding sustainable energy systems. The aim of the conference is to bring together researchers, and government and industry professionals to discuss the future of energy in buildings, neighbourhoods and cities from a theoretical, practical, implementation and simulation perspective. The conference formed an exciting chance to present, interact and learn about the latest research and practical developments on the subject. The conference attracted submissions from around the world. Submissions for the Full-Paper Track were subjected to a blind peer-review process. Only the best of these were selected for presentation at the conference and publication in these proceedings. It is intended that this book provides a useful and informative snapshot of recent research developments in the important and vibrant area of sustainability in energy and buildings.

Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Crown Currency. This book was released on 2017-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolu­tion, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wear­able sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manu­facturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individu­als. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frame­works that advance progress.

Download or read book Evaluation of Energy Efficiency and Flexibility in Smart Buildings written by Alessia Arteconi and published by MDPI. This book was released on 2021-01-21 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Evaluation of Energy Efficiency and Flexibility in Smart Buildings” addresses the relevant role of buildings as strategic instruments to improve the efficiency and flexibility of the overall energy system. This role of the built environment is not yet fully developed and exploited and the book content contributes to increasing the general awareness of achievable benefits. In particular, different topics are discussed, such as optimal control, innovative efficient technologies, methodological approaches, and country analysis about energy efficiency and energy flexibility potential of the built environment. The Special Issue offers valuable insights into the most recent research developments worldwide.

Download or read book Essential Building Science written by Jacob Deva Racusin and published by New Society Publishers. This book was released on 2016-11-28 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Down and dirty – a complete step-by-step guide to making, installing and living with beautiful, all-natural earthen floors Poor heat and moisture management are the enemies of durable, comfortable, and efficient housing, and good building design and construction starts with a solid understanding of good building science. Essential Building Science provides a highly visual and accessible introduction to the fundamentals of building science for residential construction. Part one covers the rationale behind high-performance design and the fundamentals of building physics, including thermal dynamics, moisture transfer, and hygro-thermal dynamics such as vapor drive and condensation. Part two teaches the vital critical thinking skills needed to consider buildings as whole systems and to develop thermal and moisture control strategies regardless of the specifics of the design. Case studies and examples from across North American climatic zones illuminate real-life problems and offer builders, designers, and DIYers the insights and tools required for creating better new buildings and dramatically improving old ones. Good science plus critical thinking equals high performance buildings.

Download or read book Man Climate and Architecture written by Baruch Givoni and published by Spons Architecture Price Book. This book was released on 1976 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Historical Buildings and Energy written by Giovanna Franco and published by Springer. This book was released on 2017-03-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a methodological framework to set properly the thermal enhancement and energy efficiency in historical buildings during a renovation process. It describes the unique thermal features of historical properties, closely examining how the building materials, structural elements, and state of conservation can impact energy efficiency, including sample calculations and results. It also describes means and aims of several fundamental steps to improve energy efficiency in historical buildings with an experimentation on a case study. This timely text also introduces leading-edge technologies for enhancing the energy performance of historical buildings, including the potential for integration of co- ad tri-generation though micro-turbines, photovoltaics and solar collectors and their compatibility with architectural preservation.