Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Improvement of Mine Productivity and Overall Economy by Modern Technology written by G. Almgren and published by . This book was released on 1987 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Productive Safe and Responsible Coal Mining written by Joseph Hirschi and published by Woodhead Publishing. This book was released on 2018-08-18 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Productive, Safe, and Responsible Coal Mining covers the latest advancements in coal mining technology and practices. It gives a comprehensive introduction to the latest research and technology developments, addressing problems and issues currently being faced, and is a valuable resource of complied technical information on the latest coal mining safety and health research. As coal's staying power has been at the forefront of the world's energy mix for more than a century, this book explores critical issues affecting coal mining, including how to maintain low-cost productivity, address health and safety hazards, and how to be responsible environmental stewards. This book takes a holistic approach in addressing each issue from the perspective of its impact on the coal mining operation and industry as a whole. - Explains how to effectively produce coal within existing environmental constraints - Encapsulates the latest health and safety research and technological advances in the coal mining industry - Written by authors who have developed the latest technology for coal mines
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Mine Planning and Equipment Selection 2004 written by Monika Hardygóra and published by CRC Press. This book was released on 2004-08-15 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spearheading the promotion of international technology transfer in the fields of mine planning, mining systems design, equipment selection and operation techniques, the International Symposium on Mine Planning and Equipment Selection is recognised by the mining society as a key annual event in highlighting developments within the field. Here in this volume, proceedings from the thirteenth annual symposium concentrate on the following major topics: * open pit and underground mine planning, modelling and design * geomechanics * mining and processing methods * design, monitoring and maintenance of mine equipment * simulation, optimalization and control of technological processes * management, mine economics and financial analysis * health, safety and environmental protection. Including 147 papers from leading experts and authorities, Mine Planning and Equipment Selection undoubtedly provides valuable information and insight for a range of engineers, scientists, researchers and consultants involved in the planning, design and operation of underground and surface mines.
Download or read book Hardrock Mining on Federal Lands written by National Research Council and published by National Academies Press. This book was released on 1999-11-03 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the result of a congressionally mandated study, examines the adequacy of the regulatory framework for mining of hardrock mineralsâ€"such as gold, silver, copper, and uraniumâ€"on over 350 million acres of federal lands in the western United States. These lands are managed by two agenciesâ€"the Bureau of Land Management in the Department of the Interior, and the Forest Service in the Department of Agriculture. The committee concludes that the complex network of state and federal laws that regulate hardrock mining on federal lands is generally effective in providing environmental protection, but improvements are needed in the way the laws are implemented and some regulatory gaps need to be addressed. The book makes specific recommendations for improvement, including: The development of an enhanced information management system and a more efficient process to review new mining proposals and issue permits. Changes to regulations that would require all mining operations, other than "casual use" activities that negligibly disturb the environment, to provide financial assurances for eventual site cleanup. Changes to regulations that would require all mining and milling operations (other than casual use) to submit operating plans in advance.
Download or read book Modern Management in the Global Mining Industry written by Robin G. Adams and published by Emerald Group Publishing. This book was released on 2019-08-26 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together perspectives from economics, specifically minerals economics, to the management of global mining companies. It covers volatile price forecasting, cost analysis, investment decisions, and the social, environmental, and developmental impacts of mining.
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book Rock Mechanics written by Barry H.G. Brady and published by Springer Science & Business Media. This book was released on 2007-01-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock angineering taht have taken place over the last two decades. Although "Rock Mechanics for Underground Mining" addresses many of the rock mechanics issues that arise in underground mining engineering, it is not a text exclusively for mining applications. Based on extensive professional research and teaching experience, this book will provide an authoratative and comprehensive text for final year undergraduates and commencing postgraduate stydents. For profesional practitioners, not only will it be of interests to mining and geological engineers, but also to civil engineers, structural mining geologists and geophysicists as a standard work for professional reference purposes.
Download or read book Mining Science and Technology written by Yuehan Wang and published by CRC Press. This book was released on 2004-09-15 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jointly sponsored by the China University of Mining and Technology and the University of Nottingham, UK, a total of 187 papers have been included in the proceedings, of which fifty-two are contributed by authors outside of China. Scholars and experts from both China and abroad discuss and exchange information on the latest developments in mining science and technology worldwide, which cover extensive areas ranging from mine operation and safety technology, geology and methane drainage, geomechanics, mine construction and tunnelling, mineral processing and clean coal technology, mine control and automation to mine environment, mine economics and management.
Download or read book Slurry Transport Using Centrifugal Pumps written by K. C. Wilson and published by Springer Science & Business Media. This book was released on 2008-03-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1,1 Applications of Slurry Transport Vast tonnages are pumped every year in the form of solid-liquid mixtures, known as slurries. The application which involves the largest quantities is the dredging industry, continually maintaining navigation in harbours and rivers, altering coastlines and winning material for landfill and construction purposes. As a single dredge may be required to maintain a throughput of 7000 tonnes of slurry per hour or more, very large centrifugal pumps are used. Figures 1-1 and 1-2 show, respectively, an exterior view of this type of pump, and a view of a large dredge-pump impeller (Addie & Helmley, 1989). The manufacture of fertiliser is another process involving massive slur- transport operations. Li Florida, phosphate matrix is recovered by huge draglines in open-pit mining operations. It is then slurried, and pumped to the wash plants through pipelines with a typical length of about 10 kilometres. Each year some 34 million tonnes of matrix are transported in this manner. This industry employs centrifugal pumps that are generally smaller than those used in large dredges, but impeller diameters up to 1. 4 m are common, and drive capacity is often in excess of 1000 kW. The transport distance is typically longer than for dredging applications, and Chapter 1 Figure LI. Testing a dredge pump at the GIW Hydraulic Laboratory Figure 1. 2. Impeller for large dredge pump 1. Introduction 3 hence a series of pumping stations is often used. Figure 1-3 shows a boost- pump installation in a phosphate pipeline.
Download or read book Information Technology and the U S Workforce written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-04-18 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have yielded significant advances in computing and communication technologies, with profound impacts on society. Technology is transforming the way we work, play, and interact with others. From these technological capabilities, new industries, organizational forms, and business models are emerging. Technological advances can create enormous economic and other benefits, but can also lead to significant changes for workers. IT and automation can change the way work is conducted, by augmenting or replacing workers in specific tasks. This can shift the demand for some types of human labor, eliminating some jobs and creating new ones. Information Technology and the U.S. Workforce explores the interactions between technological, economic, and societal trends and identifies possible near-term developments for work. This report emphasizes the need to understand and track these trends and develop strategies to inform, prepare for, and respond to changes in the labor market. It offers evaluations of what is known, notes open questions to be addressed, and identifies promising research pathways moving forward.
Download or read book Handbook for Dust Control in Mining written by Fred N. Kissell and published by . This book was released on 2003 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Abstracts written by and published by . This book was released on 1993 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Internet of Things written by Sabina Jeschke and published by Springer. This book was released on 2016-10-12 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the core system science needed to enable the development of a complex industrial internet of things/manufacturing cyber-physical systems (IIoT/M-CPS). Gathering contributions from leading experts in the field with years of experience in advancing manufacturing, it fosters a research community committed to advancing research and education in IIoT/M-CPS and to translating applicable science and technology into engineering practice. Presenting the current state of IIoT and the concept of cybermanufacturing, this book is at the nexus of research advances from the engineering and computer and information science domains. Readers will acquire the core system science needed to transform to cybermanufacturing that spans the full spectrum from ideation to physical realization.
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Crown Currency. This book was released on 2017-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Download or read book Industry 4 0 written by Elena B. Zavyalova and published by Springer Nature. This book was released on 2021-08-09 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the futuristic scientific view of the consequences of transition to Industry 4.0 for climate change. The authors present a systemic overview of the current negative consequences of digitization for the environment, new outlines of the energy sphere in Industry 4.0 and the change of the environment pollution level in Industry 4.0. The book also analyses the ecological consequences of growth and development of Industry 4.0, and considers Industry 4.0 as an alternative to fighting climate change. The book presents a view on fighting climate change in Industry 4.0 from the positions of shifting the global community’s attention from environment protection to formation of the digital economy. A logical continuation of this book is a view from the opposite side, which would allow reflecting the contribution of Industry 4.0 into fighting climate change and the perspectives of harmonization of these top-priority directions of the global economy’s development. This book will be of interest to academics and practitioners interested in climate change and development of Industry 4.0, as well contributing to a national economic policy for fighting climate change and corporate strategies of sustainable development in Industry 4.0.
