Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers

Download or read book Turbine Aerodynamics written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough description of actual, working aerodynamic design and analysis systems, for both axial-flow and radial-flow turbines. It describes the basic fluid dynamic and thermodynamic principles, empirical models and numerical methods used for the full range of procedures and analytical tools that an engineer needs for virtually any type of aerodynamic design or analysis activity for both types of turbine. The book includes sufficient detail for readers to implement all or part of the systems. The author provides practical and effective design strategies for applying both turbine types, which are illustrated by design examples. Comparisons with experimental results are included to demonstrate the prediction accuracy to be expected. This book is intended for practicing engineers concerned with the design and development of turbines and related machinery.

Download or read book Analytical Determination of Radial Inflow Turbine Design Geometry for Maximum Efficiency written by Harold E. Rohlik and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organic Rankine Cycle Technology for Heat Recovery written by Enhua Wang and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on organic Rankine cycle technology presents nine chapters on research activities covering the wide range of current issues on the organic Rankine cycle. The first section deals with working fluid selection and component design. The second section is related to dynamic modeling, starting from internal combustion engines to industrial power plants. The third section discusses industrial applications of waste heat recovery, including internal combustion engines, LNG, and waste water. A comprehensive analysis of the technology and application of organic Rankine cycle systems is beyond the aim of the book. However, the content of this volume can be useful for scientists and students to broaden their knowledge of technologies and applications of organic Rankine cycle systems.

Download or read book Turbine Design and Application written by Arthur J. Glassman and published by . This book was released on 1972 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Radial Turbomachines written by A. Whitfield and published by Longman. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past three decades advances have been made in the fluid dynamic and thermodynamic design and understanding of radial flow turbomachines. Radial turbomachines possess their own distinctive characteristics, and present the engineer with as full a range of complexities as any fluid flow problem. This book describes the current technology and design methods for centrifugal compressors and radial turbines working in compressible flow. These are of particular relevance to gas turbine engines, internal combustion engine turbochargers, process compressors and cryogenic expanders. The aerodynamic design of the turbomachine is preliminary design to the specification of blade forms and computational fluid dynamic analysis of vane and blade passage flows. The treatment throughout is modern, with full recognition of current computer-aided design methods. However throughout the book a clear separation is made between the fundamental gas dynamics and the empiricism necessary to close the gap between theory and practice in situations of such complexity. Computer program listings for preliminary design are included. The problems posed by specific applications are dealt with in details: for example, techniques for the suppression of surge in centrifugal compressors and a consequent widening of the operating range, and the problems of pulse operation of radial turbines as encountered in turbocharger applications. The book contains comprehensive surveys of the literature in all these fields.

Download or read book Axial and Radial Turbines written by Hany Moustapha and published by Concepts Eti. This book was released on 2003 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Design and Analysis of Axlal and Radial Turbines.

Download or read book Ocean Thermal Energy Conversion OTEC written by Albert S. Kim and published by BoD – Books on Demand. This book was released on 2020-05-13 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st century is characterized as an era of natural resource depletion, and humanity is faced with several threats due to the lack of food, energy, and water. Climate change and sea-level rise are at unprecedented levels, being phenomena that make predicting the future of ocean resources more complicated. Oceans contain a limitless amount of water with small (but finite) temperature differences from their surfaces to their floors. To advance the utilization of ocean resources, this book readdresses the past achievements, present developments, and future progress of ocean thermal energy, from basic sciences to sociology and cultural aspects.

Download or read book Thermal Systems written by Ivan CK Tam and published by MDPI. This book was released on 2021-04-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in interesting times in which life as we know it is being threatened by manmade changes to the atmosphere in which we live. On the global scale, concern is focused on climate change due to greenhouse gas emissions, and on a national scale, atmospheric pollution produced by combustion processes is of concern. A possible approach is through the development of new ideas and innovative processes to the current practices. Among the available options, multi-generation processes such as the trigeneration cycle, battery storage system, solar power plants and heat pumps have been widely studied, as they potentially allow for greater efficiency, lower costs, and reduced emissions. On the other hand, some researchers had been working to increase the potential of energy generation process through heat recovery under the steam generator, organic Rankine cycle, and absorption chillers. In this Special Issue on "Thermal Systems” of fundamental or applied and numerical or experimental investigation, many new concepts in thermal systems and energy utilization were explored and published as original research papers in this “Special Issue”.

Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.

Download or read book Organic Rankine Cycle for Energy Recovery System written by Andrea De Pascale and published by MDPI. This book was released on 2020-06-18 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rising trend in the global energy demand poses new challenges to humankind. The energy and mechanical engineering sectors are called to develop new and more environmentally friendly solutions to harvest residual energy from primary production processes. The Organic Rankine Cycle (ORC) is an emerging energy system for power production and waste heat recovery. In the near future, this technology can play an increasing role within the energy generation sectors and can help achieve the carbon footprint reduction targets of many industrial processes and human activities. This Special Issue focuses on selected research and application cases of ORC-based waste heat recovery solutions. Topics included in this publication cover the following aspects: performance modeling and optimization of ORC systems based on pure and zeotropic mixture working fluids; applications of waste heat recovery via ORC to gas turbines and reciprocating engines; optimal sizing and operation of ORC under combined heat and power and district heating application; the potential of ORC on board ships and related issues; life cycle analysis for biomass application; ORC integration with supercritical CO2 cycle; and the proper design of the main ORC components, including fluid dynamics issues. The current state of the art is considered and some cutting-edge ORC technology research activities are examined in this book.

Download or read book Organic Rankine Cycles for Waste Heat Recovery written by Silvia Lasala and published by BoD – Books on Demand. This book was released on 2020-05-13 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises five chapters on developed research activities on organic Rankine cycles. The first section aims to provide researchers with proper modelling (Chapter 1) and experimental (Chapter 2) tools to calculate and empirically validate thermophysical properties of ORC working fluids. The second section introduces some theoretical and experimental studies of organic Rankine cycles for waste heat recovery applications: a review of different supercritical ORC (Chapter 3), ORC for waste heat recovery from fossil-fired power plants (Chapter 4), the experimental detailed characterization of a small-scale ORC of 3 kW operating with either pure fluids or mixtures (Chapter 5).

Download or read book Modeling Analysis and Optimization of Process and Energy Systems written by F. Carl Knopf and published by John Wiley & Sons. This book was released on 2011-12-14 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy costs impact the profitability of virtually all industrial processes. Stressing how plants use power, and how that power is actually generated, this book provides a clear and simple way to understand the energy usage in various processes, as well as methods for optimizing these processes using practical hands-on simulations and a unique approach that details solved problems utilizing actual plant data. Invaluable information offers a complete energy-saving approach essential for both the chemical and mechanical engineering curricula, as well as for practicing engineers.

Download or read book Turbomachines written by O. E. Balje and published by John Wiley & Sons. This book was released on 1981-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Fluid and Thermal Engineering written by Pankaj Saha and published by Springer. This book was released on 2020-08-14 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book gives an overview of recent developments in the field of thermal and fluid engineering, and covers theoretical and experimental fluid dynamics, numerical methods in heat transfer and fluid mechanics, different modes of heat transfer, multiphase transport and phase change, fluid machinery, turbo machinery, and fluid power. The book is primarily intended for researchers and professionals working in the field of fluid dynamics and thermal engineering.

Download or read book Exergy Energy System Analysis and Optimization Volume III written by Christos A. Frangopoulos and published by EOLSS Publications. This book was released on 2009-05-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Energy System Analysis, and Optimization theme is a component of the Encyclopedia of Energy Sciences, Engineering and Technology Resources which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty one Encyclopedias. These three volumes are organized into five different topics which represent the main scientific areas of the theme: 1. Exergy and Thermodynamic Analysis; 2. Thermoeconomic Analysis; 3. Modeling, Simulation and Optimization in Energy Systems; 4. Artificial Intelligence and Expert Systems in Energy Systems Analysis; 5. Sustainability Considerations in the Modeling of Energy Systems. Fundamentals and applications of characteristic methods are presented in these volumes. These three volumes are aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Geothermal Energy written by Mary H. Dickson and published by Routledge. This book was released on 2013-07-04 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy refers to the heat contained within the Earth that generates geological phenomena on a planetary scale. Today, this term is often associated with man's efforts to tap into this vast energy source. Geothermal Energy: utilization and technology is a detailed reference text, describing the various methods and technologies used to exploit the earth's heat. Beginning with an overview of geothermal energy and the state of the art, leading international experts in the field cover the main applications of geothermal energy, including: electricity generation space and district heating space cooling greenhouse heating aquaculture industrial applications The final third of the book focuses upon environmental impact and economic, financial and legal considerations, providing a comprehensive review of these topics. Each chapter is written by a different author, but to a set style, beginning with aims and objectives and ending with references, self-assessment questions and answers. Case studies are included throughout. Whilst written primarily for professionals and students interested in learning more about geothermal energy, the book also offers those new to the field and the general geothermal community an opportunity to understand and review the potential of this exciting alternative energy source. Published with UNESCO