Download or read book Handbook of Model Predictive Control written by Saša V. Raković and published by Springer. This book was released on 2018-09-01 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in model-predictive control promise remarkable opportunities for designing multi-input, multi-output control systems and improving the control of single-input, single-output systems. This volume provides a definitive survey of the latest model-predictive control methods available to engineers and scientists today. The initial set of chapters present various methods for managing uncertainty in systems, including stochastic model-predictive control. With the advent of affordable and fast computation, control engineers now need to think about using “computationally intensive controls,” so the second part of this book addresses the solution of optimization problems in “real” time for model-predictive control. The theory and applications of control theory often influence each other, so the last section of Handbook of Model Predictive Control rounds out the book with representative applications to automobiles, healthcare, robotics, and finance. The chapters in this volume will be useful to working engineers, scientists, and mathematicians, as well as students and faculty interested in the progression of control theory. Future developments in MPC will no doubt build from concepts demonstrated in this book and anyone with an interest in MPC will find fruitful information and suggestions for additional reading.
Download or read book 23 European Symposium on Computer Aided Process Engineering written by Mihaela Iancu and published by Elsevier Inc. Chapters. This book was released on 2013-06-10 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environment safety and climate changes reduction are two important aspects which partially can be achieved by lowering gaseous emissions emerged from chemical industry. These emissions are characterized by low pollutant concentration, high volumes of gases and low temperatures. Their treatment could emerge in economical sustainable technologies only if the reactors used are capable of high yields, high selectivity and autothermal behavior. The forced unsteady-state reactors are an excellent choice for treating this type of emissions because allow trapping of the moving heat wave inside the catalytic bed when exothermic reactions take place; the catalytic bed acts as a regenerative heat exchanger creating the premises of a sustain autothermal behavior even if the temperature of the feed is low. Nevertheless, the forced unsteady state reactors are characterized by a remarkable complex dynamic behavior, as a consequence of the complex interaction between heat and mass transport phenomena inside the reactor. This dynamic behavior gives rise to a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat and chemical reactivity, difficult to deal with. Therefore, an advance control strategy is needed to be applied in order to tackle with all issues that characterize reactors with improved contact between reactants, in which the thermal wave is stored and which allow improved kinetic activity of the catalyst used. The catalytic activity is the main operation concern for processes with low feed temperatures and constraints related to low emissions of unconverted reactants. Therefore, predictions of reactor pseudo or steady-state performances regarding conversion, selectivity and thermal behavior and the dynamic reactor response during exploitation are important aspects in finding the optimal control strategy. Moreover, the switching time and the reagents concentrations in the feeding zone are the main operating parameters that may be adapted or changed to fulfill the condition of zero emissions when using forced unsteady-state reactors. Nevertheless, due to unsteady state reactors characteristics, the adaptation of these parameters to process requirements reveals important control design problems. Therefore, in this paper the possibility of using an advanced control strategy, combining model predictive control (MPC) with an on-off control was studied in order to handle with problems that arise when using a forced unsteady-state catalytic reactor network (RN) in case of selective catalytic reduction of NOx with ammonia. The RN system consists of a network of three plug-flow reactors in series, operated in a closed loop configuration. The RN dynamic model was developed using MatLab/Simulink software. The results revealed that the proposed control strategy (i.e. the on-off control and MPC) can successfully handle the NOx emissions of this kind of reactors.
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Practical Design and Application of Model Predictive Control written by Nassim Khaled and published by Butterworth-Heinemann. This book was released on 2018-05-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Design and Application of Model Predictive Control is a self-learning resource on how to design, tune and deploy an MPC using MATLAB® and Simulink®. This reference is one of the most detailed publications on how to design and tune MPC controllers. Examples presented range from double-Mass spring system, ship heading and speed control, robustness analysis through Monte-Carlo simulations, photovoltaic optimal control, and energy management of power-split and air-handling control. Readers will also learn how to embed the designed MPC controller in a real-time platform such as Arduino®. The selected problems are nonlinear and challenging, and thus serve as an excellent experimental, dynamic system to show the reader the capability of MPC. The step-by-step solutions of the problems are thoroughly documented to allow the reader to easily replicate the results. Furthermore, the MATLAB® and Simulink® codes for the solutions are available for free download. Readers can connect with the authors through the dedicated website which includes additional free resources at www.practicalmpc.com. - Illustrates how to design, tune and deploy MPC for projects in a quick manner - Demonstrates a variety of applications that are solved using MATLAB® and Simulink® - Bridges the gap in providing a number of realistic problems with very hands-on training - Provides MATLAB® and Simulink® code solutions. This includes nonlinear plant models that the reader can use for other projects and research work - Presents application problems with solutions to help reinforce the information learned
Download or read book Periodic Operation of Chemical Reactors written by P. L. Silveston and published by Butterworth-Heinemann. This book was released on 2012-12-04 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive review, prepared by 24 experts, many of whom are pioneers of the subject, brings together in one place over 40 years of research in this unique publication. This book will assist R & D specialists, research chemists, chemical engineers or process managers harnessing periodic operations to improve their process plant performance. Periodic Operation of Reactors covers process fundamentals, research equipment and methods and provides "the state of the art" for the periodic operation of many industrially important catalytic reactions. Emphasis is on experimental results, modeling and simulation. Combined reaction and separation are dealt with, including simulated moving bed chromatographic, pressure and temperature swing and circulating bed reactors. Thus, Periodic Operation of Reactors offers readers a single comprehensive source for the broad and diverse new subject. This exciting new publication is a "must have" for any professional working in chemical process research and development. - A comprehensive reference on the fundamentals, development and applications of periodic operation - Contributors and editors include the pioneers of the subject as well as the leading researchers in the field - Covers both fundamentals and the state of the art for each operation scenario, and brings all types of periodic operation together in a single volume - Discussion is focused on experimental results rather than theoretical ones; provides a rich source of experimental data, plus process models - Accompanying website with modelling data
Download or read book Advances in Green Energy Systems and Smart Grid written by Kang Li and published by Springer. This book was released on 2018-09-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 923, CCIS 924, and CCIS 925 constitutes the thoroughly refereed proceedings of the First International Conference on Intelligent Manufacturing and Internet of Things, and of the 5th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018, held in Chongqing, China, in September 2018.The 135 revised full papers presented were carefully reviewed and selected from over 385 submissions.The papers of this volume are organized in topical sections on: clean energy; electric vehicles; energy saving; energy storages; power system analysis.
Download or read book Multimedia Technology and Enhanced Learning written by Bing Wang and published by Springer Nature. This book was released on with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust and Fault Tolerant Control written by Krzysztof Patan and published by Springer. This book was released on 2019-03-16 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust and Fault-Tolerant Control proposes novel automatic control strategies for nonlinear systems developed by means of artificial neural networks and pays special attention to robust and fault-tolerant approaches. The book discusses robustness and fault tolerance in the context of model predictive control, fault accommodation and reconfiguration, and iterative learning control strategies. Expanding on its theoretical deliberations the monograph includes many case studies demonstrating how the proposed approaches work in practice. The most important features of the book include: a comprehensive review of neural network architectures with possible applications in system modelling and control; a concise introduction to robust and fault-tolerant control; step-by-step presentation of the control approaches proposed; an abundance of case studies illustrating the important steps in designing robust and fault-tolerant control; and a large number of figures and tables facilitating the performance analysis of the control approaches described. The material presented in this book will be useful for researchers and engineers who wish to avoid spending excessive time in searching neural-network-based control solutions. It is written for electrical, computer science and automatic control engineers interested in control theory and their applications. This monograph will also interest postgraduate students engaged in self-study of nonlinear robust and fault-tolerant control.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Spray Wall Interaction Modelling by Dimensionless Data Analysis written by Dominik Kuhnke and published by . This book was released on 2004 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Energy Environment and Chemical Engineering Volume 1 written by Ahmad Zuhairi Abdullah and published by CRC Press. This book was released on 2022-12-21 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Energy, Environment and Chemical Engineering collects papers resulting from the conference on Energy, Environment and Chemical Engineering (AEECE 2022), Dali, China, 24-26 June, 2022. The primary goal is to promote research and developmental activities in energy technology, environment engineering and chemical engineering. Moreover, it aims to promote scientific information interchange between scholars from the top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducts in-depth exchanges and discussions on relevant topics such as energy engineering, environment technology and advanced chemical technology, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of saving technologies, environmental chemistry, clean production and so on. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trend and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.
Download or read book Review of the Research Program of the U S DRIVE Partnership written by National Research Council and published by National Academies Press. This book was released on 2013-05-13 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of the Research Program of the U.S. DRIVE Partnership: Fourth Report follows on three previous NRC reviews of the FreedomCAR and Fuel Partnership, which was the predecessor of the U.S. DRIVE Partnership (NRC, 2005, 2008a, 2010). The U.S. DRIVE (Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability) vision, according to the charter of the Partnership, is this: American consumers have a broad range of affordable personal transportation choices that reduce petroleum consumption and significantly reduce harmful emissions from the transportation sector. Its mission is as follows: accelerate the development of pre-competitive and innovative technologies to enable a full range of efficient and clean advanced light-duty vehicles (LDVs), as well as related energy infrastructure. The Partnership focuses on precompetitive research and development (R&D) that can help to accelerate the emergence of advanced technologies to be commercialization-feasible. The guidance for the work of the U.S. DRIVE Partnership as well as the priority setting and targets for needed research are provided by joint industry/government technical teams. This structure has been demonstrated to be an effective means of identifying high-priority, long-term precompetitive research needs for each technology with which the Partnership is involved. Technical areas in which research and development as well as technology validation programs have been pursued include the following: internal combustion engines (ICEs) potentially operating on conventional and various alternative fuels, automotive fuel cell power systems, hydrogen storage systems (especially onboard vehicles), batteries and other forms of electrochemical energy storage, electric propulsion systems, hydrogen production and delivery, and materials leading to vehicle weight reductions.
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acid Precipitation written by and published by . This book was released on 1991-07 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2007 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2021-06-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers different aspects of internal combustion engines including engine performance and emissions and presents various solutions to resolve these issues. The contents provide examples of utilization of methanol as a fuel for CI engines in different modes of transportation, such as railroad, personal vehicles or heavy duty road transportation. The volume provides information about the current methanol utilization and its potential, its effect on the engine in terms of efficiency, combustion, performance, pollutants formation and prediction. The contents are also based on review of technologies present, the status of different combustion and emission control technologies and their suitability for different types of IC engines. Few novel technologies for spark ignition (SI) engines have been also included in this book, which makes this book a complete solution for both kind of engines. This book will be useful for engine researchers, energy experts and students involved in fuels, IC engines, engine instrumentation and environmental research.
