Download or read book Advances in Building Technology written by M. Anson and published by Elsevier. This book was released on 2002-11-14 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of proceedings is based on the International Conference on Advances in Building Technology in Hong Kong on 4-6 December 2002. The two volumes of proceedings contain 9 invited keynote papers, 72 papers delivered by 11 teams , and 133 contributed papers from over 20 countries around the world. The papers cover a wide spectrum of topics across the three technology sub-themes of structures and construction, environment, and information technology. The variety within these categories spans a width of topics, and these proceedings provide readers with a good general overview of recent advances in building research.

Download or read book Construction Industry Advance and Change written by Michael Anson and published by Emerald Group Publishing. This book was released on 2021-11-10 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Industry Advance and Change: Progress in Eight Asian Economies since 1995 describes construction industry progress between 1995 and 2019, sharing information and context needed to appreciate the nature of construction industries and the factors affecting industry output performance.

Download or read book Routledge Handbook on Labour in Construction and Human Settlements written by Edmundo Werna and published by Taylor & Francis. This book was released on 2023-12-12 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Routledge Handbook on Labour in Construction and Human Settlements presents a detailed and comprehensive examination of the relationship between labour and the built environment, and synergises these critical focus areas in innovative ways. This unrivalled edited collection of chapters analyses problems and presents possible solutions related to the employment and conditions of workers in the construction industry. It provides comprehensive coverage of the relationship between the global workforce and the built environment and is divided into four topical areas: how labour and the built environment relate to development; employment generation in the built environment; quality of employment in the built environment; and the impact of the built environment on labour in other sectors. Underpinning the entire book is the premise that the way the built environment is produced, and its main products – buildings, cities and towns – have an impact on large numbers of workers. At the same time, the quality of the built environment requires construction workers who are well trained and with good working conditions. While cities and towns are the engines of economic growth, they will not be able to fulfil their economic potential if poverty in the workforce is not addressed. Those who are unemployed, underemployed or work in unfavourable conditions cannot fully contribute to production, and at the same time are limited in their ability to purchase goods and services – therefore limiting economic growth and restricting improvements in their living standards. In addition, investments in infrastructure, housing and inner-city redevelopment cannot be sustainable if labour issues – i.e., poverty – are not addressed. This book aims at analysing this complex set of issues comprehensively and will be essential reading to a wide range of researchers across the interdisciplinary intersections of construction, business and management, economic development, urban studies, sociology, political science and project management.

Download or read book Advances in Civil Engineering and Building Materials written by Shuenn-Yih Chang and published by CRC Press. This book was released on 2012-10-31 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Civil Engineering and Building Materials presents the state-of-the-art development in: - Structural Engineering - Road & Bridge Engineering- Geotechnical Engineering- Architecture & Urban Planning- Transportation Engineering- Hydraulic Engineering - Engineering Management- Computational Mechanics- Construction Technology- Buildi

Download or read book Construction Stakeholder Management written by Ezekiel Chinyio and published by John Wiley & Sons. This book was released on 2009-10-22 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures best practice in construction stakeholdermanagement using a range of international case studies. Itdemonstrates stakeholder mapping, presents the power/interestmatrix and analyses a model for the timely engagement ofstakeholders. The increased use of partnering and other relational forms ofcontracting have underlined the need for project participants towork together and also to be aware of all those who can affect orbe affected by a project and its associated developments.Stakeholder management enables them to see this wider picture andprovides guidance for managing the diverse views and interests thatcan manifest in the course of a project’s life. All construction projects have the potential for conflicts ofinterest that can result in costly and damaging legal proceedings.This new book advocates an alternative to dispute resolution thatis proactive, practical and global in its application.Construction Stakeholder Management is therefore anessential text for advanced students, lecturers, researchers andpractitioners in the built environment.

Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.

Download or read book Building a World Class Construction Industry written by Mohammed Fadhil Dulaimi and published by NUS Press. This book was released on 2001 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry has developed an image of being the least developed sector of the economy in most countries. The industry is consistently being accused of failing its customers and providing products and services that do not meet expectations. The C21 steering committee has led a national review of the state of the construction industry in Singapore, which was completed, with the publication of the C21 report in October 1999. The report provided an analysis of the state of the industry and a set of recommendations. The committee set a vision for the construction industry for the 21st century to be a world-class builder in the knowledge age. This study builds on the work of the C21 Steering Committee and working groups, and the conclusions of the C21 report. The eight-month study addresses the question of how Singapore's construction industry can change and improve itself. The study starts with a comparison of the C21 report with similar reviews in the UK and Australia. The main fundamental problems and challenges facing the construction industry are not unique but universal. The latest review in the UK, which was one of several in the last 50 years, was different as it was mainly client led. The Australian initiative was part of a national action agenda to improve the different sectors of the industry. This had an impact on the nature of the conclusions and recommendations. The study examined the impact of the C21 report on the construction industry. The study received and analysed survey responses from 200 companies involved in construction including clients, contractors, subcontractors, consultants, specialist contractors, suppliers and manufacturers. The study has established that the level of awareness of the C21 report is not high. Also the respondents provided only moderate support to the potential of the C21 to improve the state of the industry. Therefore, the study strongly recommends a more effective dissemination program to inform the industry of the rationale and philosophies of C21. This program should include discussion forums and feedback on the barriers and enablers for greater improvements. The study has identified 12 key factors that are seen to impede the attempts of the industry to improve its business activities. The industry has, collectively, also identified the main problems to be: client focus on the lowest price at the tendering stage; and the narrow profit margins in construction business activities. However, the different sectors in the industry expressed different views. The study then examined the C21 strategic thrusts and studied the possible enablers and motivators that would help the industry to achieve improvements under nine several categories. The study also explored the differing views in the different groupings. Upon closer examination of the results of the study, one theme that underpins many of the potential solutions is that sustained improvement in a market driven economy can only be recognized by creating the market forces that would demand these improvements. Therefore, the study recommends that an effective way to improve construction business is to adopt a market driven agenda for improvement aimed at delivering changes and improvements that are focused on providing better value products and services to the customer. A key to the achievement of this aim is for the clients of the construction industry led by the biggest among them, to adopt practices that would facilitate this change and empower the industry to realize its potential.

Download or read book Industrialized and Automated Building Systems written by Abraham Warszawski and published by Routledge. This book was released on 2003-09-02 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive approach towards the industrialization of building. It argues that only industrialization and automation can bring radical changes necessary to the building industry.

Download or read book New Metropolitan Perspectives written by Francesco Calabrò and published by Springer Nature. This book was released on 2022-08-24 with total page 2873 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims to face the challenge of post-COVID-19 dynamics toward green and digital transition, between metropolitan and return to villages’ perspectives. It presents a multi-disciplinary scientific debate on the new frontiers of strategic and spatial planning, economic programs and decision support tools, within the urban–rural areas networks and the metropolitan cities. The book focuses on six topics: inner and marginalized areas local development to re-balance territorial inequalities; knowledge and innovation ecosystem for urban regeneration and resilience; metropolitan cities and territorial dynamics; rules, governance, economy, society; green buildings, post-carbon city and ecosystem services; infrastructures and spatial information systems; cultural heritage: conservation, enhancement and management. In addition, the book hosts a Special Section: Rhegion United Nations 2020-2030. The book will benefit all researchers, practitioners and policymakers interested in the issues applied to metropolitan cities and marginal areas.

Download or read book Architectural Science Review written by and published by . This book was released on 2002 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Architectural Publications Index written by and published by . This book was released on 1998 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Forms of Procurement written by Marcus C. Jefferies and published by Routledge. This book was released on 2016-04-14 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three decades have seen the evolution of Public–Private Partnerships (PPPs) and Relationship Contracting (RC) as alternative procurement approaches to traditional methods of delivering public infrastructure. The potential for growth in these new forms of procurement has led to an on-going debate on the nature of requirements, particularly in terms of policy development, encouraging private investment and value for money. A key argument for Governments to procure projects using PPPs and RC is that the process delivers better value for all the stakeholders, including the community and asset end-users. This wide-ranging study of such crucial procurement issues includes international historical context, collaboration and risk management, with a focus on sustainable procurement approaches. The international significance of PPPs and RC procurement is reinforced with case study examples from the UK, Europe, North America, South Africa and the Asia-Pacific. It features cutting-edge research from around the world on subjects such as: Reviews and reflection of the PPP approach Project Alliancing Implementation of RC in developing countries Changes in procurement policy Value for money, collaboration and stakeholder involvement Growth and emergence of PPPs in Asia Risk management Including contributions from some of the world's most prominent academics and practitioners in this field, it is a crucial guide to the strategic choices governments now face for the provision of infrastructure, between using ‘public’ or ‘private’ mechanisms, or a combination of the two.

Download or read book The Management of Construction A Project Lifecycle Approach written by F. Lawrence Bennett and published by Routledge. This book was released on 2007-06-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of Construction introduces all aspects of management practice to students and professionals based in the construction industry. It is also important for those involved in allied fields such as design, project development, and site monitoring and inspection. The book addresses each stage of the construction project from conception to completion, giving a perspective on the whole life cycle often missing from textbooks. The author also balances engineering concerns with the human resource and personal aspects of construction management that are so important to the successful outcome of a project.

Download or read book Sustainable Practices in the Built Environment written by Craig Langston and published by Routledge. This book was released on 2008-09-10 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability is a key issue and its impact on the construction industry, as one of the major users of the Earth's resources, is starting to take hold. This book deals with sustainability as it affects the construction industry, looking at the techniques and issues which designers, engineers, planners and construction managers will have to deal with in their day-to-day activities. It covers methods of analysis such as environmental impact assessment and cost-benefit analysis as well as topics on design and energy regulation and conservation. The book is an important introduction to the subject for senior undergraduate and postgraduate students. Given the importance and novelty of the subject, professionals in the construction industry will also find the book valuable.

Download or read book Construction Safety Management Systems written by Steve Rowlinson and published by Routledge. This book was released on 2004-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry has a distressingly poor safety record, whether measured in absolute terms or alongside other industries. The level of construction safety in a country is influenced by factors such as variations in the labour forces, shifting economies, insurance rates, legal ramifications and the stage of technological development. Yet the problem is a world-wide one, and many of the ways of tackling it can be applied across countries. Effective tools include designing, preplanning, training, management commitment and the development of a safety culture. The introduction and operation of effective safety management systems represents a viable way forwards, but these systems are all too rarely implemented. How can this be done? Should we go back to prescriptive legislation? This book considers these questions by drawing together leading-edge research papers from the proceedings of an international conference conducted by a commission (W099) on Safety and Health on Construction Sites of CIB, the international council of building research organisations.

Download or read book The Urban Climatic Map written by Edward Ng and published by Routledge. This book was released on 2015-09-07 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid urbanization, higher density and more compact cities have brought about a new science of urban climatology. An understanding of the mapping of this phenomenon is crucial for urban planners. The book brings together experts in the field of Urban Climatic Mapping to provide the state of the art understanding on how urban climatic knowledge can be made available and utilized by urban planners. The book contains the technology, methodology, and various focuses and approaches of urban climatic map making. It illustrates this understanding with examples and case studies from around the world, and it explains how urban climatic information can be analysed, interpreted and applied in urban planning. The book attempts to bridge the gap between the science of urban climatology and the practice of urban planning. It provides a useful one-stop reference for postgraduates, academics and urban climatologists wishing to better understand the needs for urban climatic knowledge in city planning; and urban planners and policy makers interested in applying the knowledge to design future sustainable cities and quality urban spaces.

Download or read book Research Methods for Construction written by Richard F. Fellows and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods for Construction will help you instil rigour into your problem-solving, and into your reports and publications. It will be of value to construction, surveying, architecture and civil engineering students undertaking research, whether for bachelors and masters degree dissertations, or for masters and doctoral research degree theses. Now in its Fourth Edition, this remains one of the few books to provide guidance on research formulation, methodologies, and methods specifically for construction students. Three main sections – Producing a Proposal, Executing the Research and Reporting the Results discuss the key issues in research and examine the primary approaches, both qualitative and quantitative. The methods adopted for scientific and engineering experiments, model building and simulations are discussed, as well as those employed for research into management, social and economic issues. The authors examine the requirements for data and analysis, including the important statistical considerations and a range of qualitative techniques that enable construction researchers to appreciate what needs to be evaluated in devising how research may be carried out effectively and efficiently. This new edition has been updated to reflect current debates and concerns, including ethical issues, legislation and codes of practice concerning the collection, processing, storage, use and disposal of data. Pressures of time and funding to carry out the empirical work all too often lead to a lack of attention to how the study should be done and why. The authors address the importance of explaining the philosophical approach adopted (ontology, epistemology) and the consequent methodology. They advocate close scrutiny of the methods available for appropriateness, both academically and practically. The fundamental theme of the book remains to facilitate a researcher’s informed and justified selection of a philosophical paradigm and of appropriate methods to execute the research.