Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-01-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Driving Climate Change written by Daniel Sperling and published by Elsevier. This book was released on 2010-07-26 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is one of the greatest challenges facing global society. The debate over what to do is confounded by the uncertain relationship between increasing greenhouse gas emissions and climate change, and the impact of those changes on nature and human civilization. Driving Climate Change will provide professionals and students alike with the latest information regarding greenhouse emissions while presenting the most up-to-date techniques for reducing these emissions. It will investigate three broad strategies for reducing greenhouse gas emissions: 1) reducing motorized travel, 2) shifting to less energy intensive modes, and 3) changing fuel and propulsion technologies. Findings will be presented by the leaders in the field with contributions from professors, researchers, consultants and engineers at the most prominent institutions - commercial, academic and federal - dealing with environmental research and policy. - Includes a comprehensive evaluation of current industrial practice - Provides technologically sound and manageable techniques for engineers, scientists and designers - Incorporates guidelines for a sustainable future
Download or read book Implementation of Corporate Average Fuel Economy CAFE Standards written by United States. Congress. House. Committee on Commerce. Subcommittee on Energy and Power and published by . This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.
Download or read book Transitions to Alternative Vehicles and Fuels written by National Research Council and published by National Academies Press. This book was released on 2013-04-14 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a century, almost all light-duty vehicles (LDVs) have been powered by internal combustion engines operating on petroleum fuels. Energy security concerns about petroleum imports and the effect of greenhouse gas (GHG) emissions on global climate are driving interest in alternatives. Transitions to Alternative Vehicles and Fuels assesses the potential for reducing petroleum consumption and GHG emissions by 80 percent across the U.S. LDV fleet by 2050, relative to 2005. This report examines the current capability and estimated future performance and costs for each vehicle type and non-petroleum-based fuel technology as options that could significantly contribute to these goals. By analyzing scenarios that combine various fuel and vehicle pathways, the report also identifies barriers to implementation of these technologies and suggests policies to achieve the desired reductions. Several scenarios are promising, but strong, and effective policies such as research and development, subsidies, energy taxes, or regulations will be necessary to overcome barriers, such as cost and consumer choice.
Download or read book Energy Technology Innovation written by Arnulf Grubler and published by Cambridge University Press. This book was released on 2014 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: An edited volume on factors determining success or failure of energy technology innovation, for researchers and policy makers.
Download or read book Reducing Gasoline Consumption written by Terry Dinan and published by Nova Biomedical Books. This book was released on 2003 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several Members of Congress and public interest groups have recently proposed policies that would reduce gasoline consumption in the United States. Such proposals stem primarily from a desire to enhance the nation's energy security and to decrease its emissions of carbon dioxide, a key greenhouse gas that affects the Earth's climate. This book compares three methods of reducing gasoline consumption: increasing the corporate average fuel economy (CAFE) standards that govern passenger vehicles, raising the federal tax on gasoline, and setting a limit on carbon emissions from gasoline combustion and requiring gasoline producers to hold allowances for those emissions (a policy known as a cap-and-trade program). Also, the book weighs the relative merits of those policies against several major criteria: whether they would minimise costs to producers and consumers; how reliably they would achieve a given reduction in gasoline use; their implications for automobile safety; and their effects on such factors as traffic congestion, requirements for highway construction, and emissions of air pollutants other than carbon dioxide. In addition, the book examines two more policy implications that lawmakers may be concerned about: the impact on people at different income levels and in different regions, and the effects on federal revenue.
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Tires and Passenger Vehicle Fuel Economy written by and published by Transportation Research Board. This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-03-01 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.
Download or read book Automobile Fuel Economy written by John H. Anderson, Jr. and published by DIANE Publishing. This book was released on 2002 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overall fuel economy trends have prompted some energy conservationists and environmentalists to call for increasing the Corp. Avg. Fuel Economy (CAFE) standards. Those supporting an increase in the standards often cite energy security and environmental benefits that would result from improved fuel economy. Those opposed to raising the standards often cite decreased auto safety, which they contend could result from producing smaller, more fuel-efficient vehicles. This report has reviewed studies and interviewed experts to identify: the impact of increasing CAFE standards on oil consumption, the environ., and auto safety in the U.S.; and other issues that affect the CAFE.
Download or read book The Discipline of Organizing Professional Edition written by Robert J. Glushko and published by "O'Reilly Media, Inc.". This book was released on 2014-08-25 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note about this ebook: This ebook exploits many advanced capabilities with images, hypertext, and interactivity and is optimized for EPUB3-compliant book readers, especially Apple's iBooks and browser plugins. These features may not work on all ebook readers. We organize things. We organize information, information about things, and information about information. Organizing is a fundamental issue in many professional fields, but these fields have only limited agreement in how they approach problems of organizing and in what they seek as their solutions. The Discipline of Organizing synthesizes insights from library science, information science, computer science, cognitive science, systems analysis, business, and other disciplines to create an Organizing System for understanding organizing. This framework is robust and forward-looking, enabling effective sharing of insights and design patterns between disciplines that weren’t possible before. The Professional Edition includes new and revised content about the active resources of the "Internet of Things," and how the field of Information Architecture can be viewed as a subset of the discipline of organizing. You’ll find: 600 tagged endnotes that connect to one or more of the contributing disciplines Nearly 60 new pictures and illustrations Links to cross-references and external citations Interactive study guides to test on key points The Professional Edition is ideal for practitioners and as a primary or supplemental text for graduate courses on information organization, content and knowledge management, and digital collections. FOR INSTRUCTORS: Supplemental materials (lecture notes, assignments, exams, etc.) are available at http://disciplineoforganizing.org. FOR STUDENTS: Make sure this is the edition you want to buy. There's a newer one and maybe your instructor has adopted that one instead.
Download or read book Transportation Land Use and Environmental Planning written by Elizabeth Deakin and published by Elsevier. This book was released on 2019-10-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation, Land Use, and Environmental Planning examines the practices and policies linking transportation, land use and environmental planning needed to achieve a healthy environment, thriving economy, and more equitable and inclusive society. It assesses best practices for improving the performance of city and regional transportation systems, looking at such issues as public transit and non-motorized travel investments, mixed use and higher density urban development, radically transformed vehicles, and transportation systems. The book lays out the growing need for greater integration of transportation, land use, and environmental planning, looking closely at changing demographic needs, public health concerns, housing affordability, equity, and livability. In addition, strategies for achieving these desired outcomes are presented, including urban design and land use planning, regional and corridor-level transit plans, bike and pedestrian improvements, demand management strategies, and emerging technologies and services. The final part of the book examines implementation challenges, considering lessons from the US and around the globe at both local and regional levels.
Download or read book Autonomous Vehicle Technology written by James M. Anderson and published by Rand Corporation. This book was released on 2014-01-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry appears close to substantial change engendered by “self-driving” technologies. This technology offers the possibility of significant benefits to social welfare—saving lives; reducing crashes, congestion, fuel consumption, and pollution; increasing mobility for the disabled; and ultimately improving land use. This report is intended as a guide for state and federal policymakers on the many issues that this technology raises.
