Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Microcomputer Application in Process Control written by E. Adali and published by Elsevier. This book was released on 2014-06-28 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium brings together the research from different disciplines of process control, and discusses the problems encountered in the application of automation systems. The papers in this volume analyze the results of theoretical research and how far applications have been developed, new design methodologies and technologies, to give a comprehensive overview of the state of the art of this fast-developing science.

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book Intelligent Components and Instruments for Control Applications 1994 written by Cs. Banyasz and published by Elsevier. This book was released on 2014-05-23 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in computer technology and sensor development have led to increasingly successful control operations. In order to maximize future potential it is vital for academics and practitioners in the field to have an international forum for discussion and evaluation of the latest developments. The IFAC Symposia on intelligent components and instruments provide this opportunity and the latest in the series gives rise to this invaluable publication which provides an authoritative assessment of the present state and future directions of these key technologies.

Download or read book Theory and Application of Digital Control written by A. K. Mahalanabis and published by Elsevier. This book was released on 2014-05-20 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Application of Digital Control contains the proceedings of the IFAC Symposium held at New Delhi, India on January 5-7, 1982. This book particularly presents the texts of the five plenary talks and the 110 papers of the symposium. This book organizes the papers into 109 chapters, with nearly one-third of the papers focus on digital control, particularly, software and hardware of control using microcomputers; computer-aided design; and adaptive control and modeling for digital control. Another set of papers deal with several applications of digital control techniques in solving interesting problems of socio economic systems, electrical power systems, bio systems, and artificial satellites. The reader will benefit hugely from the topics in this book that span several important theoretical and applied areas of the fast-changing topic of digital control.

Download or read book CAD CAM Robotics and Factories of the Future written by Birendra Prasad and published by Springer. This book was released on 2013-12-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete shop floor automation - a "lights out factory", where workers initially set up all machines, turn off the lights, lock the door and the machine churns up the parts - remains an unfulfilled dream. Yet when we look at the enormity of the process of automation and integration even for the most simply conceived part factory, we can recognize that automation has been applied and is being applied, more so when it made sense from a cost/benefit standpoint. It is our nature to be dissatisfied with near term progress, but when we realize how short a time the tools to do that automation have been available, the progress is clearly noteworthy - considering the multitudes of factors and the environment we have to deal with. Most of the automa tion problems we confront in today's environment are multidisciplinary in nature. They require not just the knowledge and experience in various distinct fields but good cooperation from different disci plined organizations to adequately comprehend and solve such problems. In Volume III we have many examples that reflect the current state of the art techniques of robotics and plant automation. The papers for Volume III have been arranged in a logical order of automation planning, automated assembly, robot programming and simula tion, control, motion coordination, communication and networking to factories of the future.

Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.

Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.

Download or read book Control Systems written by Jitendra R. Raol and published by CRC Press. This book was released on 2019-07-12 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Systems: Classical, Modern, and AI-Based Approaches provides a broad and comprehensive study of the principles, mathematics, and applications for those studying basic control in mechanical, electrical, aerospace, and other engineering disciplines. The text builds a strong mathematical foundation of control theory of linear, nonlinear, optimal, model predictive, robust, digital, and adaptive control systems, and it addresses applications in several emerging areas, such as aircraft, electro-mechanical, and some nonengineering systems: DC motor control, steel beam thickness control, drum boiler, motional control system, chemical reactor, head-disk assembly, pitch control of an aircraft, yaw-damper control, helicopter control, and tidal power control. Decentralized control, game-theoretic control, and control of hybrid systems are discussed. Also, control systems based on artificial neural networks, fuzzy logic, and genetic algorithms, termed as AI-based systems are studied and analyzed with applications such as auto-landing aircraft, industrial process control, active suspension system, fuzzy gain scheduling, PID control, and adaptive neuro control. Numerical coverage with MATLAB® is integrated, and numerous examples and exercises are included for each chapter. Associated MATLAB® code will be made available.

Download or read book Microprocessors in Signal Processing Measurement and Control written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: In racent years the LSI technology has witnessed a revoluti onary development, and allowed substantial reductions in the size and cost of digital logic circuitry. Computer system building blocks have progressed from the level of discrete components to the level of complex ICs involving many logic circuits on a single "chip". The invention and wide applica tions of microprocessors have changed the philosophy of the signal processing, measurement and control engineering fields. The microprocessor-based digital signal processing systems and controllers have replaced the conventional ones based on standard analog and digital computing equipment. The first microprocessors and "on-chip" computers have appeared towards the end of 71 beginning 72. Their evolution since then and the number of applications, in which they have been utilized, have both been extremely spectacular. New system concepts and hardware/software tools are steadily under development to sup port the microprocessor in its multiple and complex tasks. The goal of this book is to provide a cohesive and well-balan ced set of contributions dealing with important aspects and applications of microprocessors to signal processing, measu rement and system control. The majority of contributions in clude sufficient review material and present rather complete treatments of the respective topics.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1982 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Midwest Symposium on Circuits and Systems written by and published by . This book was released on 1995 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Computers 1999 Ed 1999 Edition written by and published by Rex Bookstore, Inc.. This book was released on with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automatic Control and Computer Sciences written by and published by . This book was released on 1984 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1977 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AETA 2018 Recent Advances in Electrical Engineering and Related Sciences Theory and Application written by Ivan Zelinka and published by Springer. This book was released on 2019-04-13 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings address a broad range of topic areas, including telecommunication, power systems, digital signal processing, robotics, control systems, renewable energy, power electronics, soft computing and more. Today’s world is based on vitally important technologies that combine e.g. electronics, cybernetics, computer science, telecommunication, and physics. However, since the advent of these technologies, we have been confronted with numerous technological challenges such as finding optimal solutions to various problems regarding controlling technologies, signal processing, power source design, robotics, etc. Readers will find papers on these and other topics, which share fresh ideas and provide state-of-the-art overviews. They will also benefit practitioners, who can easily apply the issues discussed here to solve real-life problems in their own work. Accordingly, the proceedings offer a valuable resource for all scientists and engineers pursuing research and applications in the above-mentioned fields.