Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.

Download or read book Nanofluids written by Mohammad Mehdi Rashidi and published by Elsevier. This book was released on 2024-07-17 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are a new class of heat transfer fluids engineered by dispersing and stably suspending nanoparticles in traditional heat transfer fluids. Recently they have obtained global attention from the scientific community owing to their unique properties and significant applications in different engineering fields. Nanofluids: Preparation, Applications and Simulation Methods provides a comprehensive review of recent advances in this important research field. Different approaches for preparing some remarkable families of nanofluids such as aluminum oxide-based nanofluids, CuO/Cu-based nanofluids, carbon nanotubes/graphene-based nanofluids, ZnO-based nanofluids, Fe3O4-based nanofluids, and SiO2-based nanofluids are discussed in detail as well as their current and potential applications. Different approaches for numerical, semi-analytical and analytical simulations are also discussed including molecular dynamics, the Lattice Boltzmann method, and spectral methods, as well as advanced analytical techniques such as the Differential Transform Method, the Homotopy Analysis Method, and Optimal Homotopy Analysis. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, nanotechnologists, and chemists working in the development of nanomaterials and nanofluids for heat transfer in energy and engineering applications. - Covers the synthesis of nanostructures, preparation of nanofluids, different applications and proposed models for fluid mechanics and heat transfer - Presents recent advances on preparation methods, including green chemistry-based methods for preparation of nanomaterials and nanofluids - Includes novel model-based approaches such as molecular dynamics and Lattice Boltzmann methods - Delves into applications in renewable energy technologies and thermal management - Contains a Semi-analytical approach for solving Time-Fractional Navier-Stokes Equation

Download or read book Proceedings of the 2002 ASME Joint U S European Fluids Engineering Conference written by and published by . This book was released on 2002 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first of two volumes representing the proceedings of the July 2002 conference, and it is itself in two volumes (parts A & B). Approximately 400 papers discuss analysis, numerical methods, experiments in single-phase and multiphase flows, and applications. Topics include high speed jet flows; fluid measurement, instrumentation and machinery; cavitation and multiphase flow; advances in free surface and interface fluid dynamics; CFD applications in large facilities and in automotive flows; turbulent, vehicular, unsteady, three-dimensional, and environmental flows; supersonic flows in shock waves; fluidics; advances in fluids engineering education; flow instabilities and control; fundamentals and industrial applications; and wavelet application in fluid mechanics. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book Advances in Mechanical Engineering written by B. B. Biswal and published by Springer Nature. This book was released on 2020-01-16 with total page 1624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018). The book contains peer reviewed articles covering thematic areas such as fluid mechanics, renewable energy, materials and manufacturing, thermal engineering, vibration and acoustics, experimental aerodynamics, turbo machinery, and robotics and mechatronics. Algorithms and methodologies of real-time problems are described in this book. The contents of this book will be useful for both academics and industry professionals.

Download or read book Proceedings of the 4th ASME JSME Joint Fluids Engineering Conference written by Ali Ogut and published by . This book was released on 2003 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three Dimensional Attached Viscous Flow written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2013-10-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscous flow is treated usually in the frame of boundary-layer theory and as two-dimensional flow. Books on boundary layers give at most the describing equations for three-dimensional boundary layers, and solutions often only for some special cases. This book provides basic principles and theoretical foundations regarding three-dimensional attached viscous flow. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers. This wider scope is necessary in view of the theoretical and practical problems to be mastered in practice. The topics are weak, strong, and global interaction, the locality principle, properties of three-dimensional viscous flow, thermal surface effects, characteristic properties, wall compatibility conditions, connections between inviscid and viscous flow, flow topology, quasi-one- and two-dimensional flows, laminar-turbulent transition and turbulence. Though the primary flight speed range is that of civil air transport vehicles, flows past other flying vehicles up to hypersonic speeds are also considered. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers, as this wider scope is necessary in view of the theoretical and practical problems that have to be overcome in practice. The specific topics covered include weak, strong, and global interaction; the locality principle; properties of three-dimensional viscous flows; thermal surface effects; characteristic properties; wall compatibility conditions; connections between inviscid and viscous flows; flow topology; quasi-one- and two-dimensional flows; laminar-turbulent transition; and turbulence. Detailed discussions of examples illustrate these topics and the relevant phenomena encountered in three-dimensional viscous flows. The full governing equations, reference-temperature relations for qualitative considerations and estimations of flow properties, and coordinates for fuselages and wings are also provided. Sample problems with solutions allow readers to test their understanding.

Download or read book Previews of Heat and Mass Transfer written by and published by . This book was released on 1999 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Theory of Turbulent Jets written by Genrikh Naumovich Abramovich and published by Mit Press. This book was released on 1963 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author's first monograph on turbulent jets, in 1936, dealt solely with a free submerged jet. Since that time, the theory of the turbulent jet has been developed in many published works both in the USSR and abroad: it has been enriched with a large amount of experimental material and has been applied in many new fields of engineering. In the last 10 years very substantial progress has been made, and it has now become possible to go beyond the free submerged jet and to solve the problem of a jet in a stream of fluid, to take into account the interaction between the jet and solid walls, to ascertain the relationship between the contour of the jet and the ratio of its density to the density of the surrounding medium, and to establish the characteristic features of a supersonic jet. This monograph contains the results of further research by the author and his colleagues, as well as a critical reappraisal of the more important theoretical and experimental data published by other investigators. The first section deals with the theory of a turbulent jet of incompressible fluid. It gives a systematic analysis of numerous experimental data on velocity profiles, temperature, and the impurity concentration, as well as the outlines of the turbulent mixing lone. The second section sets forth the theory of turbulent gas jets, including strongly preheated and supersonic jets. The theory of free turbulence in a gas, suitable in principle for any degree of compressibility, is revised, and the equations are derived for motion and heat exchange in the boundary layer of a jet at very high temperature. The third section solves several problems of the spreading of jets in finite and semifinite space, and the fourth section describes various applications of the theory of jets, many of which are reported for the first time or have been significantly revised.

Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1977-05-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer

Download or read book Publications of the Faculty written by Arizona State University and published by . This book was released on 1972 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Engineering for Power written by and published by . This book was released on 1973 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Heat Transfer written by and published by . This book was released on 2003 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Paper written by and published by . This book was released on 2001 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Survey of Literature on Flow Characteristics of a Single Turbulent Jet Impinging on a Flat Plate written by James W. Gauntner and published by . This book was released on 1970 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow characteristics of single jets impinging on flat surfaces have been studied by many investigators. The results of some of the numerous studies are summarized herein. Suggested methods for determining velocities and pressures on which to base heat-transfer correlations for use in impingement cooling design are presented.

Download or read book ASME Technical Papers written by and published by . This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerothermodynamics of Aircraft Engine Components written by Gordon C. Oates and published by AIAA. This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Design and R & D engineers and students will value the comprehensive, meticulous coverage in this volume. Beginning with the basic principles and concepts of aeropropulsion combustion, chapters explore specific processes, limitations, and analytical methods as they bear on component design.

Download or read book Proceedings of the ASME Heat Transfer Division written by and published by . This book was released on 2007 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: