Download or read book Impingement Cooling and Heat Transfer Measurement Using Transient Liquid Crystal Technique written by Yizhe Huang and published by . This book was released on 1996 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transient Liquid Crystal Measurement of Local Heat Transfer on a Rotating Disk with Jet Impingement written by Darryl E. Metzger and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental technique has been developed for measurement of local convection heat transfer characteristics on rotating surfaces, utilizing thin liquid crystal surface coatings in a thermal transient test procedure. The encapsulated liquid crystal coatings used are sprayed directly on the test surface and their response is observed and processed during the transient with automated computer vision and data acquisition systems. Heat transfer coefficients are calculated from the thermal transient response of the test surface, as determined from the color indication from the thin coating. A significant advantage of the method, especially for convection in disk/shroud cavities that may contain recirculating fluid regions, is that appropriate thermal boundary conditions are naturally imposed on all of the boundary surfaces. The method is also relatively fast and inexpensive, and allows the geometry of the disk and stator surfaces to be changed easily, without the expenses of mounting discrete heat flux and temperature sensors and equipment to transfer information to a stationary frame of reference. Application of the experimental technique is demonstrated with detailed radially local surface Nusselt number distributions acquired for cases involving jet impingement onto a smooth disk, rotating in close proximity to a parallel plane stator disk. A single circular jet, with nozzle exit flush mounted in the stator, is oriented normal to the disk surface at various radii and flow rates. Local Nusselt numbers are presented non-dimensionally as functions of both disk and flow Reynolds numbers. The results indicate that the local radial heat transfer distribution can be controlled by varying the impingement radius, but maximum radially averaged heat transfer is obtained with impingement at the disk center.
Download or read book Experimental Methods in Heat Transfer and Fluid Mechanics written by Je-Chin Han and published by CRC Press. This book was released on 2020-05-20 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods in Heat Transfer and Fluid Mechanics focuses on how to analyze and solve the classic heat transfer and fluid mechanics measurement problems in one book. This work serves the need of graduate students and researchers looking for advanced measurement techniques for thermal, flow, and heat transfer engineering applications. The text focuses on analyzing and solving classic heat transfer and fluid mechanics measurement problems, emphasizing fundamental principles, measurement techniques, data presentation, and uncertainty analysis. Overall, the text builds a strong and practical background for solving complex engineering heat transfer and fluid flow problems. Features Provides students with an understandable introduction to thermal-fluid measurement Covers heat transfer and fluid mechanics measurements from basic to advanced methods Explains and compares various thermal-fluid experimental and measurement techniques Uses a step-by-step approach to explaining key measurement principles Gives measurement procedures that readers can easily follow and apply in the lab
Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.
Download or read book Application of the Transient Heat Transfer Measurement Technique Using Thermochromic Liquid Crystals in Networks of Intersecting Circular Passages written by Anika Steurer and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling of Convective Heat and Mass Transfer in Rotating Flows written by Igor V. Shevchuk and published by Springer. This book was released on 2015-07-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analytical solutions. The book will be a valuable read for research experts and practitioners in the field of heat and mass transfer.
Download or read book Heat Transfer Measurements in Rotating Turbine Blade Cooling Channel Configurations Using the Transient Thermochromic Liquid Crystal Technique written by Christian Waidmann and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A New Technique for Dynamic Flow Visualization and Heat Transfer Measurement Using Liquid Crystal Thermography written by Agustin David Ochoa and published by . This book was released on 2004 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Preheated wall Transient Method Using Liquid Crystals for the Measurement of Heat Transfer on External Surfaces and in Ducts written by Xiaojun Yan and published by . This book was released on 1993 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Investigations of Heat Transfer and Film Cooling Effectiveness Using the Transient Liquid Crystal Technique written by Alexander Hoffs and published by . This book was released on 1996 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Utilization of the Transient Liquid Crystal Technique for Film Cooling Effectiveness and Heat Transfer Investigations on a Flat Plate and a Turbine Airfoil written by U. Drost and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, FL, Jun 2-Jun 5, 1997.
Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Download or read book Transient Liquid Crystal Technique for Convective Heat Transfer on Rough Surfaces written by Douglas N. Barlow and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine and Aeroengine Congress & Exposition, Houston, Texas - June 5-8, 1995.
Download or read book Impingement Flow Heat Transfer Measurements of Turbine Blades Using a Jet Array written by Treuren Kenneth W. Van and published by . This book was released on 1994 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Advances in Gas Turbine Technology written by Ernesto Benini and published by BoD – Books on Demand. This book was released on 2011-11-04 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbine engines will still represent a key technology in the next 20-year energy scenarios, either in stand-alone applications or in combination with other power generation equipment. This book intends in fact to provide an updated picture as well as a perspective vision of some of the major improvements that characterize the gas turbine technology in different applications, from marine and aircraft propulsion to industrial and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into five main sections including 21 chapters overall: (I) Aero and Marine Gas Turbines, (II) Gas Turbine Systems, (III) Heat Transfer, (IV) Combustion and (V) Materials and Fabrication.
