Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials Part 1 written by Jang-Kyo Kim and published by . This book was released on 1998 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials written by Jang Kyo Kim and published by Trans Tech Publications Ltd. This book was released on 1997-09-04 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many engineering applications of composite and laminate materials, damage and failure can be caused by impact of various types. Low-velocity impact is potentially dangerous because it can produce extensive sub-surface delamination that may not be visible on the surface. High-velocity impact produced by projectiles, shock waves and fragments from exploding ammunition is a highly dynamic event, leading to the penetration or perforation of composites. All impact damage is detrimental to the mechanical and structural performance of composites. Accurate evaluation of the damaged state, and a fundamental understanding of the effect of damage upon the resultant properties are therefore essential for the proper design and application of composite materials. The strain-rate dependence of material behavior, fracture propagation and energy-absorbing capacity are also of paramount importance from both the materials science and structural mechanics perspectives.
Download or read book IMPACT response and dynamic failure of composites and laminate materials 2 parts written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Failure of Composite and Sandwich Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors. The first section deals with fluid-structure interactions in marine structures. The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures. Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature. Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of impact on laminated composite structures with chapters devoted to ballistic impacts on pre-stressed composite structures, tests developed to simulate dynamic failure in marine structures, damage mechanisms and energy absorption in low velocity impacts, perforation, the numerical simulation of intra and inter-ply damage during impact, and hail impact on laminated composites. Sandwich structures with laminated facings are considered in Section 3 with chapters dealing with the discrete modeling of honeycomb core during the indentation of sandwich structures, the behavior of fold core sandwich structures during impact, and impact on helicopter blades. The fourth section consists of two chapters presenting experimental results and numerical simulation of composite structures subjected to crash. This volume is intended for advanced undergraduate and graduate students, researchers, and engineers interested and involved in analysis and design of composite structures.
Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials Impact damage and ballistic impact written by and published by . This book was released on 1998 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials Strain rate effect energy absorption and modelling written by Jang-Kyo Kim and published by . This book was released on 1998 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Response and Failure of Composite Materials and Structures written by Valentina Lopresto and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response and Failure of Composite Materials and Structures presents an overview of recent developments in a specialized area of research with original contributions from the authors who have been asked to outline needs for further investigations in their chosen topic area. The result is a presentation of the current state-of-the art in very specialized research areas that cannot be found elsewhere in the literature. For example, Massabò presents a newly developed theory for laminated composite plates that accounts for imperfect bonding between layers with new solutions for problems involving thermal effects. This theory is new and computationally-efficient, and the author describes how it fits in the broader context of composite plate theory. Abrate discusses the design of composite marine propellers and presents a detailed derivation of the equations of motion of a rotating blade, including centrifugal effects and the effects of pre-twisting and other geometric parameters. This book is a major reference resource for academic and industrial researchers and designers working in aerospace, automotives, and the marine engineering industry.
Download or read book Dynamic Response and Failure of Composite Materials and Structures written by Valentina Lopresto and published by Woodhead Publishing. This book was released on 2017-05-17 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response and Failure of Composite Materials and Structures presents an overview of recent developments in a specialized area of research with original contributions from the authors who have been asked to outline needs for further investigations in their chosen topic area. The result is a presentation of the current state-of-the art in very specialized research areas that cannot be found elsewhere in the literature. For example, Massabò presents a newly developed theory for laminated composite plates that accounts for imperfect bonding between layers with new solutions for problems involving thermal effects. This theory is new and computationally-efficient, and the author describes how it fits in the broader context of composite plate theory. Abrate discusses the design of composite marine propellers and presents a detailed derivation of the equations of motion of a rotating blade, including centrifugal effects and the effects of pre-twisting and other geometric parameters. This book is a major reference resource for academic and industrial researchers and designers working in aerospace, automotives, and the marine engineering industry. - Presents recent developments in a research field that has experienced tremendous advances because of improved computational capabilities, new materials, and new testing facilities - Includes contributions from leading researchers from Europe and the USA who present the current state-of-the-art, including unique and original research - Provides extensive experimental results and numerical solutions - Appeals to a broad range of professional researchers working in aerospace, automotive, and marine engineering fields
Download or read book Engineering Plasticity And Impact Dynamics Proceedings Of The Intl Symp On Plasticity And Impact Ispi 2001 written by Liangchi Zhang and published by World Scientific. This book was released on 2001-12-11 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and impact dynamics are two important areas in engineering practice, which includes structural engineering, crashworthiness, metal formation and new structural materials. The application of engineering plasticity and impact dynamics has resulted in significant achievements both technically and economically.This book presents the state-of-the-art developments in the above fields. It contains over 15 chapters written by experts in engineering plasticity and impact dynamics. It covers a wide range of theoretical developments and engineering applications, including fundamentals of energy absorption, applications of new materials, crashworthiness, bifurcation in plasticity, microdynamics, penetration, wave propagation, fracture, laser impact and particle-impact-induced erosion.
Download or read book Dynamic Response and Failure of Composite Materials written by Valentina Lopresto and published by Springer Nature. This book was released on 2023-04-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances and innovations in the field of dynamic loads and testing of composite materials and sandwich structures, as presented by international researchers and engineers at the International Symposium on Dynamic Response and Failure of Composite Materials (DRAF), held in Ischia, Italy, on June 21–24, 2022. Contributions include a wide range of topics such as low and high velocity impacts, smart composites, hull slamming, shock and blast, hail and bird impact, damage resistance and tolerance, failure mechanisms, composite structures, delamination and fractures, progressive damage modeling, micromechanics, ballistic impacts, ceramic and CMC, auxetic materials and structures, additive manufacturing, crashworthiness, green composites, and structural health monitoring.
Download or read book Engineering Plasticity and Impact Dynamics written by Liangchi Zhang and published by World Scientific. This book was released on 2001 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and impact dynamics are two important areas in engineering practice, which includes structural engineering, crashworthiness, metal formation and new structural materials. The application of engineering plasticity and impact dynamics has resulted in significant achievements both technically and economically.This book presents the state-of-the-art developments in the above fields. It contains over 15 chapters written by experts in engineering plasticity and impact dynamics. It covers a wide range of theoretical developments and engineering applications, including fundamentals of energy absorption, applications of new materials, crashworthiness, bifurcation in plasticity, microdynamics, penetration, wave propagation, fracture, laser impact and particle-impact-induced erosion.
Download or read book Impact Response and Dynamic Failure of Composites and Laminatematerials written by J. K. Kim and published by . This book was released on 1998 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials under Extreme Loadings written by Eric Buzaud and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent and cutting edge advances in our understanding of key aspects of the response of materials under extreme loads that take place during high velocity impact and penetration. The focus of the content is on the numerous challenges associated with characterization and modeling of complex interactions that occur during these highly dynamic events. The following specific topics, among others, are addressed: characterization of material behavior under extreme loadings (estimate of damage, effects related to moisture contents, large pressures, large strain rates, etc.); measurement of microstructural changes associated with damage and mesoscopic scale modeling; macroscopic modeling, using the framework of the theory of viscoplasticity and damage; modeling and simulation of localization, cracking, and dynamic fragmentation of materials; application to penetration mechanics and trajectory instabilities. The book gathers together selected papers based on work presented as invited lectures at the 2nd US-France symposium held on 28-30 May 2008 in Rocamadour, France. The conference was organized by Eric Buzaud (DGA, Centre d'Études de Gramat) under the auspices of the International Center for Applied Computational Mechanics (ICACM).
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Experimental Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 71 papers presented at the symposium on “Recent Advances in Experimental Mechanics” which was organized in honor of Professor Isaac M. Daniel. The symposium took place at Virginia Polytechnic Institute and State University on th June 23-28, 2002, in conjunction with the 14 US National Congress of Applied Mechanics. The book is a tribute to Isaac Daniel, a pioneer of experimental mechanics and composite materials, in recognition of his continuous, original, diversified and outstanding contributions for half a century. The book consists of invited papers written by leading experts in the field. It contains original contributions concerning the latest developments in experimental mechanics. It covers a wide range of subjects, including optical methods of stress analysis (photoelasticity, moiré, etc.), composite materials, sandwich construction, fracture mechanics, fatigue and damage, nondestructive evaluation, dynamic problems, fiber optic sensors, speckle metrology, digital image processing, nanotechnology, neutron diffraction and synchrotron radiation methods. The papers are arranged in the following nine sections: Mechanical characterization of material behavior, composite materials, fracture and fatigue, optical methods, n- destructive evaluation, neutron diffraction and synchrotron radiation methods, hybrid methods, composite structures, and structural testing and analysis.
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.
