Download or read book Impact of Macromolecular Design on Self assembly Properties of Block Copolymers written by Kamlesh Ramesh Bornani and published by . This book was released on 2017 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The generation of well-ordered complex structures from constituent block copolymeric building blocks by the spontaneous process of self-assembly is useful in various technologies. The well-defined 3D structures are dictated by complex energetic interplays and their shape is controllable by both preparative conditions and macromolecular design. This dissertation work aims at exploring the effect of chain flexibility and chain topology design changes on phase behavior of block copolymers in solution. Further, we exploit the tunable flexibility of the semiflexible polymers in studying dispersion and controlling macroscale thermal properties in polymer nanocomposites. The experimental design is based on two model systems: The first is based on polystyrene-b-poly1,3-cyclohexadiene (PS-b-PCHD). Here, the semiflexible nature of PCHD is tunable through alteration in the chain microstructure of the polymer backbone. As altered flexibility impacts the ability of chains to pack, which is shown to affect micelle morphology in solution. Further, we exploit the entropic contributions due to changes in chain configuration of PCHD (controlled through microstructure to control the dispersion of silica nanoparticles in matrices varying flexibility. Because we leave the monomer type unchanged, studying PCHD-based materials enables us to draw links between chain configuration and phase behavior. The second system is based on polystyrene-polyisoprene, (PS-PI), where multiple star copolymers were studied in a PI selective solvent. The study highlights how architecture and composition influence self-organization of the topologically-complex polymers in solution. The topological constraints introduced through architecture and composition were unable to induce any morphological changes, however design variation was successful in inducing changes in micelle size. These studies help understand the self-assembly properties of semiflexible and topologically-complex systems and provide means to control micelle properties through macromolecular design. Additionally, the macromolecular design changes also provide an opportunity to control and enhance desired properties in polymer nanocomposites. Thus, the work conducted as a part of this dissertation is very valuable to understand design-structure-property relationships by providing insights into the physics principles operating at the nanometer length scale.

Download or read book Amphiphilic Block Copolymers written by P. Alexandridis and published by Elsevier. This book was released on 2000-10-18 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the belief of the editors of this book that the recognition of block copolymers as being amphiphilic molecules and sharing common features with other well-studied amphiphiles will prove beneficial to both the surfactant and the polymer communities. An aim of this book is to bridge the two communities and cross-fertilise the different fields. To this end, leading researchers in the field of amphiphilic block copolymer self-assembly, some having a background in surfactant chemistry, and others with polymer physics roots, have agreed to join forces and contribute to this book.The book consists of four entities. The first part discusses theoretical considerations behind the block copolymer self-assembly in solution and in the melt. The second part provides case studies of self-assembly in different classes of block copolymers (e.g., polyethers, polyelectrolytes) and in different environments (e.g., in water, in non-aqueous solvents, or in the absence of solvents). The third part presents experimental tools, ranging from static (e.g., small angle neutron scattering) to dynamic (e.g., rheology), which can prove valuable in the characterization of block copolymer self-assemblies. The fourth part offers a sampling of current applications of block copolymers in, e.g., formulations, pharmaceutics, and separations, applications which are based on the unique self-assembly properties of block copolymers.

Download or read book Block Copolymers in Solution written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2005-12-13 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text discusses the solution self-assembly of block copolymers and covers all aspects from basic physical chemistry to applications in soft nanotechnology. Recent advances have enabled the preparation of new materials with novel self-assembling structures, functionality and responsiveness and there have also been concomitant advances in theory and modelling. The present text covers the principles of self-assembly in both dilute and concentrated solution, for example micellization and mesophase formation, etc., in chapters 2 and 3 respectively. Chapter 4 covers polyelectrolyte block copolymers - these materials are attracting significant attention from researchers and a solid basis for understanding their physical chemistry is emerging, and this is discussed. The next chapter discusses adsorption of block copolymers from solution at liquid and solid interfaces. The concluding chapter presents a discussion of selected applications, focussing on several important new concepts. The book is aimed at researchers in polymer science as well as industrial scientists involved in the polymer and coatings industries. It will also be of interest to scientists working in soft matter self-assembly and self-organizing polymers.

Download or read book Block Copolymers written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2003-04-28 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers may be classified as either homopolymers, consisting of one single repeating unit, or copolymers, consisting of two or more distinct repeating units. Block copolymers contain long contiguous blocks of two or more repeating units in the same polymer chain. Covering one of the hottest topics in polymer chemistry, Block Copolymers provides a coherent overview of the synthetic routes, physical properties, and applications of block copolymers. This pioneering text provides not only a guideline for developing synthetic strategies for creating block copolymers with defined characteristics, but also a key to the relationship between the physical properties of block copolymers and the structure and dynamics of materials. Covering features of the chemistry and physics of block copolymers that are not found in comparable texts, Block Copolymers illustrates the structure-activity relationship of block copolymers and offers suggestions for the design of specific applications. Divided into five sections-Block Copolymers includes chapters on: * Block Copolymers by Chemical Modification of Precursor Polymers * Nonlinear Block Copolymers * Adsorption of Block Copolymers at Solid-Liquid Interfaces * Theory of Block Copolymer Segregation * Phase Transformation Kinetics * Block Copolymer Morphology * Block Copolymer Dynamics Polymer chemists, physicists, chemical engineers, and materials scientists, as well as graduate students in polymer science, will find Block Copolymers to be an invaluable text.

Download or read book Miktoarm Star Polymers written by Ashok Kakkar and published by Royal Society of Chemistry. This book was released on 2017-04-13 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term ‘miktoarm polymers’ refers to asymmetric branched macromolecules, a relatively new entry to the macromolecular field. Recent advances in their synthesis and intriguing supramolecular chemistry in a desired medium has seen a fast expansion of their applications. The composition of miktoarm polymers can be tailored and even pre-defined to allow a desired combination of functions, meaning polymer chemists can have complete control of the overall architecture of these macromolecules. By carefully selecting the composition, they can create supramolecular structures with intriguing properties, particularly for applications in biology. Miktoarm Star Polymers features chapters from experts actively working in this field, and provides the reader with a unique introduction to the fundamental principles of this exciting macromolecular system. Topics covered include the design, synthesis, characterization, self-assembly and applications of miktoarm polymers. The book is an excellent overview and up to date guide to those working in research in polymer chemistry, materials science, and polymers for medical applications.

Download or read book Single Chain Polymer Nanoparticles written by José A. Pomposo and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.

Download or read book Hierarchically Structured Porous Materials written by B.-L. Su and published by John Wiley & Sons. This book was released on 2012-04-06 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book devoted to this hot field of science covers materials with bimodal, trimodal and multimodal pore size, with an emphasis on the successful design, synthesis and characterization of all kinds of hierarchically porous materials using different synthesis strategies. It details formation mechanisms related to different synthesis strategies while also introducing natural phenomena of hierarchy and perspectives of hierarchical science in polymers, physics, engineering, biology and life science. Examples are given to illustrate how to design an optimal hierarchically porous material for specific applications ranging from catalysis and separation to biomedicine, photonics, and energy conversion and storage. With individual chapters written by leading experts, this is the authoritative treatment, serving as an essential reference for researchers and beginners alike.

Download or read book Synthesis and Applications of Copolymers written by Anbanandam Parthiban and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the reactivity of monomers is crucial in creating copolymers and determining the outcome of copolymerization. Covering the fundamental aspects of polymerization, Synthesis and Applications of Copolymers explores the reactivity of monomers and reaction conditions that ensure that the newly formed polymeric materials exhibit desired properties. Referencing a wide-range of disciplines, the book provides researchers, students, and scientists with the preparation of a diverse variety of copolymers and their recent developments, with a particular focus on copolymerization, crystallization, and techniques like nanoimprinting and micropatterning.

Download or read book Points Lines and Walls written by Maurice Kléman and published by John Wiley & Sons. This book was released on 1983 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Block Copolymer Self assembly written by Gayashani Kanchana Ginige and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular self-assembly is the basis of structure in nature. While of far less complexity than a natural system, the same physical rules apply to simple synthetic designed systems that spontaneously form self-assembled structures and patterns. The self-assembly of block copolymers (BCPs) is an interesting example, as it can be harnessed to form both 2D (in thin films) and 3D (in bulk) porous and chemically controlled morphologies at scale. The self-assembly of BCPs on surfaces is of interest for a range of applications, but due to the enormous economic driver that is the computer industry, this direction has been pushed most strongly. Self-assembly of BCPs has been described in the International Technology Roadmap for Semiconductors (the ITRS, and now the IDRS) for almost two decades for lithography on semiconductors and for patterning the magnetic material of hard drives. As a result, there has been much academic interest, both fundamental and applied, to meet the challenges as outlined in the ITRS/IDRS due to the promise of this scalable and low-cost nanopatterning approach. More recently, the remarkable work harnessing BCP self-assembly has been directed to other applications, one being optical metamaterials; this thesis will add to this growing body of science. One aspect holding BCP self-assembly back is the defectivity in the patterned material or surface; some applications are more defect tolerant than others, but hard drive and other computer-industry applications have very low tolerance for defects. It is, therefore, important to have systematic control over the self-assembly process as well as quality of the final patterns generated by BCP self-assembly for these applications and others not yet imagined. This thesis examines the defectivity of the hexagonal nanoscale patterns derived from BCP self-assembly and looks at extending them to produce nanoscale patterns of native and non-native morphologies that have plasmonic properties. This thesis is divided into two parts. The first part deals with optimization of solvent vapor annealing of BCP self-assembly, the critical step in which the actual nanoscale phase segregation takes place; in this case, it uses a controlled solvent vapor flow annealing apparatus, design of experiment and machine learning approaches. In this work, it was discovered that slight variations in the initial film thickness on the order of even a couple of nanometers and the final swelling degree have a huge influence on the defectivity and the quality of the resulting patterns. Next, machine learning approaches are applied to compile qualitative and quantitative defect analysis into a single figure of merit that is mapped across an experimental parameter space. This approach enables faster convergence of results to arrive at the optimum annealing conditions for the annealing of thin films of BCPs of PS-b-PDMS that generate nanoscale hexagonal patterns of silica dots with a minimum number of defects. In the second part of the thesis, mixed metal/oxide double layer patterning was studied using sequential self-assembly of BCPs. The second part of the thesis starts with optimization of reactive ion etching (RIE) for producing single layer metal nanopatterns from metal ion-loaded thin films of PS-b-P2VP BCPs to generate single layers of hexagonal metal nanopatterns that can withstand a second consecutive reactive ion etching step. The goal of this work is to enable density doubled and/or Moiré pattern formation via self-assembly of a second layer of BCP on the initial pattern prepared by self assembly of either the same or different BCP, as will be described in Chapter 4. Therefore, the initial pattern produced via BCP self-assembly and RIE etching would need to withstand a second treatment step of BCP self-assembly and RIE. While single layer nanopatterns of Au and Pt nanoparticles can be produced without much trouble, these resulting patterns could not be applied for density multiplication of metal-metal nanopatterns since the metal dots become too small and disordered. To demonstrate that metal nanoparticles derived from BCPs could be used, at least, to produce a mixed metal oxide/metal patterns, arrays of SiOx dots were first produced from PS-b-PDMS BCPs and then layered a BCP of PS-b-P2VP that was subsequently loaded with gold or platinum ions. Upon RIE etching, the BCP is removed and the SiOx/Au or Pt nanoparticle arrays were produced. Based upon the outcomes of the optimization of the etching work, mixed Au-Pt commensurate and incommensurate hexagonal lattice patterns were produced on both silicon and quartz substrates. Finally, the optical properties of these mixed metal Pt-Au bilayer patterns were studied. They demonstrated interesting plasmonic properties of the bilayer patterns, including consistent observation of extended plasmon bands that suggest coupling of the localized surface plasmon resonances (LSPRs) of the gold nanoparticles through proximal platinum nanoparticles when arrayed in periodic patterns.

Download or read book Block Copolymers II written by Volker Abetz and published by Springer Science & Business Media. This book was released on 2005-12-02 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: . A.J. M ller, V. Balsamo, M.L. Arnal: Nucleation and Crystallization in Diblock and Triblock Copolymers.- 2 J.-F. Gohy: Block Copolymer Micelles.- 3 M.A. Hillmyer: Nanoporous Materials from Block Copolymer Precursors.- 4 M. Li, C. Coenjarts, C.K. Ober: Patternable Block Copolymers.-

Download or read book Materials Nanoarchitectonics written by Katsuhiko Ariga and published by Elsevier. This book was released on 2023-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Nanoarchitectonics: From Integrated Molecular Systems to Advanced Devices provides the latest information on the design and molecular manipulation of self-organized hierarchically structured systems using tailor-made nanoscale materials as structural and functional units. The book is organized into three main sections that focus on molecular design of building blocks and hybrid materials, formation of nanostructures, and applications and devices. Bringing together emerging materials, synthetic aspects, nanostructure strategies, and applications, the book aims to support further progress, by offering different perspectives and a strong interdisciplinary approach to this rapidly growing area of innovation. This is an extremely valuable resource for researchers, advanced students, and scientists in industry, with an interest in nanoarchitectonics, nanostructures, and nanomaterials, or across the areas of nanotechnology, chemistry, surface science, polymer science, electrical engineering, physics, chemical engineering, and materials science. Offers a nanoarchitectonic perspective on emerging fields, such as metal-organic frameworks, porous polymer materials, or biomimetic nanostructures Discusses different approaches to utilizing "soft chemistry" as a source for hierarchically organized materials Offers an interdisciplinary approach to the design and construction of integrated chemical nano systems Discusses novel approaches towards the creation of complex multiscale architectures

Download or read book Bioactive Surfaces written by Hans G. Börner and published by Springer Science & Business Media. This book was released on 2011-06-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erik Wischerhoff, Nezha Badi, André Laschewsky and Jean-François Lutz Smart Polymer Surfaces: Concepts and Applications in Biosciences; S. Petersen, M. Gattermayer and M. Biesalski Hold on at the Right Spot: Bioactive Surfaces for the Design of Live-Cell Micropatterns; Julien Polleux Interfacing Cell Surface Receptors to Hybrid Nanopatterned Surfaces: A Molecular Approach for Dissecting the Adhesion Machinery; Abigail Pulsipher and Muhammad N. Yousaf Self-Assembled Monolayers as Dynamic Model Substrates for Cell Biology; D. Volodkin, A. Skirtach and H. Möhwald LbL Films as Reservoirs for Bioactive Molecules; R. Gentsch and H. G. Börner Designing Three-Dimensional Materials at the Interface to Biology; Joerg C. Tiller Antimicrobial Surfaces;

Download or read book Self Assembly written by Ramanathan Nagarajan and published by John Wiley & Sons. This book was released on 2019-01-07 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the state-of-the-art of the diverse self-assembly systems Self-Assembly: From Surfactants to Nanoparticles provides an effective entry for new researchers into this exciting field while also giving the state of the art assessment of the diverse self-assembling systems for those already engaged in this research. Over the last twenty years, self-assembly has emerged as a distinct science/technology field, going well beyond the classical surfactant and block copolymer molecules, and encompassing much larger and complex molecular, biomolecular and nanoparticle systems. Within its ten chapters, each contributed by pioneers of the respective research topics, the book: Discusses the fundamental physical chemical principles that govern the formation and properties of self-assembled systems Describes important experimental techniques to characterize the properties of self-assembled systems, particularly the nature of molecular organization and structure at the nano, meso or micro scales. Provides the first exhaustive accounting of self-assembly derived from various kinds of biomolecules including peptides, DNA and proteins. Outlines methods of synthesis and functionalization of self-assembled nanoparticles and the further self-assembly of the nanoparticles into one, two or three dimensional materials. Explores numerous potential applications of self-assembled structures including nanomedicine applications of drug delivery, imaging, molecular diagnostics and theranostics, and design of materials to specification such as smart responsive materials and self-healing materials. Highlights the unifying as well as contrasting features of self-assembly, as we move from surfactant molecules to nanoparticles. Written for students and academic and industrial scientists and engineers, by pioneers of the research field, Self-Assembly: From Surfactants to Nanoparticles is a comprehensive resource on diverse self-assembly systems, that is simultaneously introductory as well as the state of the art.

Download or read book Styrenes Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Styrenes—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Styrenes—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Styrenes—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Complex Macromolecular Architectures written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of CMA (complex macromolecular architecture) stands at the cutting edge of materials science, and has been a locus of intense research activity in recent years. This book gives an extensive description of the synthesis, characterization, and self-assembly of recently-developed advanced architectural materials with a number of potential applications. The architectural polymers, including bio-conjugated hybrid polymers with poly(amino acid)s and gluco-polymers, star-branched and dendrimer-like hyperbranched polymers, cyclic polymers, dendrigraft polymers, rod-coil and helix-coil block copolymers, are introduced chapter by chapter in the book. In particular, the book also emphasizes the topic of synthetic breakthroughs by living/controlled polymerization since 2000. Furthermore, renowned authors contribute on special topics such as helical polyisocyanates, metallopolymers, stereospecific polymers, hydrogen-bonded supramolecular polymers, conjugated polymers, and polyrotaxanes, which have attracted considerable interest as novel polymer materials with potential future applications. In addition, recent advances in reactive blending achieved with well-defined end-functionalized polymers are discussed from an industrial point of view. Topics on polymer-based nanotechnologies, including self-assembled architectures and suprastructures, nano-structured materials and devices, nanofabrication, surface nanostructures, and their AFM imaging analysis of hetero-phased polymers are also included. Provides comprehensive coverage of recently developed advanced architectural materials Covers hot new areas such as: click chemistry; chain walking; polyhomologation; ADMET Edited by highly regarded scientists in the field Contains contributions from 26 leading experts from Europe, North America, and Asia Researchers in academia and industry specializing in polymer chemistry will find this book to be an ideal survey of the most recent advances in the area. The book is also suitable as supplementary reading for students enrolled in Polymer Synthetic Chemistry, Polymer Synthesis, Polymer Design, Advanced Polymer Chemistry, Soft Matter Science, and Materials Science courses. Color versions of selected figures can be found at www.wiley.com/go/hadjichristidis

Download or read book Janus Particle Synthesis Self Assembly and Applications written by Shan Jiang and published by Royal Society of Chemistry. This book was released on 2012-11-30 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Named after the two-faced roman god, Janus particles have gained much attention due to their potential in a variety of applications, including drug delivery. This is the first book devoted to Janus particles and covers their methods of synthesis, how these particles self-assemble, and their possible uses. By following the line of synthesis, self-assembly and applications, the book not only covers the fundamental and applied aspects, but it goes beyond a simple summary and offers a logistic way of selecting the proper synthetic route for Janus particles for certain applications. Written by pioneering experts in the field, the book introduces the Janus concept to those new to the topic and highlights the most recent research progress on the topic for those active in the field and catalyze new ideas.