Download or read book Impact Engineering written by Marcílio Alves and published by CRC Press. This book was released on 2024-11-01 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Impact Engineering covers the dynamic analysis of structures undergoing small to large displacements, linear and nonlinear elastic material behavior to viscoplasticity, and the range of features of structural impact analysis. Individuals, as well as various governing bodies are concerned about protection against natural hazards, crash-type accidents, and terrorism- commonly referred to as "impact"- implying a rapid loading process. The book discusses the physics involved in such impact situations and incorporates analytical considerations as well as techniques to obtain and interpret experimental data and relevant numerical techniques. It also includes a chapter on scaling which is a relevant aspect when studying impact on large structures. This book will be useful for advanced students and professionals in civil and mechanical engineering as well as for students and researchers in applied physics and other relevant disciplines.
Download or read book Introduction to Impact Engineering written by M. Macaulay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are all familiar with impact. Lesser impacts such as hammering a nail, cracking an egg or stubbing a toe are part of everyday life. More violent impacts such as those caused by car crashes or bullets are fortunately less common but are still well enough known to be taken for granted. Very violent impacts such as meteorites striking the earth are outside our personal experience but we are aware of them. Despite this, impacts remain mysterious. They occur too quickly for us to follow what is happening and the evidence they leave behind is often ambiguous. Over the last thirty years improvements in high speed instrumen tation and developments in computing have made them more comprehensible and an increasing amount of attention is being paid to the subject which is an area of expanding scientific and engineering research. A multi-disciplinary approach is not yet established and information is scattered in many places and expressed in a variety of jargons. In applied mathematics, impacts have provided interesting theoretical problems with elegant solutions but it has been difficult to check results experimentally. Impacts can change the behaviour of materials but similar changes can sometimes be produced in other ways and the underlying mechanisms are not clear. Empirical solutions to engineering problems have worked reasonably well but it is hard to know what to do if things go wrong.
Download or read book Impact Engineering of Composite Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to the mechanics of composite materials, written for graduate students and practitioners in industry. It examines ways to model the impact event, to determine the size and severity of the damage and discusses general trends observed during experiments.
Download or read book Energy Absorption of Structures and Materials written by G Lu and published by Elsevier. This book was released on 2003-10-31 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important study focuses on the way in which structures and materials can be best designed to absorb kinetic energy in a controllable and predictable manner. Understanding of energy absorption of structures and materials is important in calculating the damage to structures caused by accidental collision, assessing the residual strength of structures after initial damage and in designing packaging to protect its contents in the event of impact. Whilst a great deal of recent research has taken place into the energy absorption behaviour of structures and materials and significant progress has been made, this knowledge is diffuse and widely scattered. This book offers a synthesis of the most recent developments and forms a detailed and comprehensive view of the area. It is an essential reference for all engineers concerned with materials engineering in relation to the theory of plasticity, structural mechanics and impact dynamics. - Important new study of energy absorption of engineering structures and materials - Shows how they can be designed to withstand sudden loading in a safe, controllable and predictable way - Illuminating case studies back up the theoretical analysis
Download or read book Engineering Earth written by Stanley D. Brunn and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 2248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to examine the actual impact of physical and social engineering projects in more than fifty countries from a multidisciplinary perspective. The book brings together an international team of nearly two hundred authors from over two dozen different countries and more than a dozen different social, environmental, and engineering sciences. Together they document and illustrate with case studies, maps and photographs the scale and impacts of many megaprojects and the importance of studying these projects in historical, contemporary and postmodern perspectives. This pioneering book will stimulate interest in examining a variety of both social and physical engineering projects at local, regional, and global scales and from disciplinary and trans-disciplinary perspectives.
Download or read book Countering Cyber Sabotage written by Andrew A. Bochman and published by CRC Press. This book was released on 2021-01-20 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Countering Cyber Sabotage: Introducing Consequence-Driven, Cyber-Informed Engineering (CCE) introduces a new methodology to help critical infrastructure owners, operators and their security practitioners make demonstrable improvements in securing their most important functions and processes. Current best practice approaches to cyber defense struggle to stop targeted attackers from creating potentially catastrophic results. From a national security perspective, it is not just the damage to the military, the economy, or essential critical infrastructure companies that is a concern. It is the cumulative, downstream effects from potential regional blackouts, military mission kills, transportation stoppages, water delivery or treatment issues, and so on. CCE is a validation that engineering first principles can be applied to the most important cybersecurity challenges and in so doing, protect organizations in ways current approaches do not. The most pressing threat is cyber-enabled sabotage, and CCE begins with the assumption that well-resourced, adaptive adversaries are already in and have been for some time, undetected and perhaps undetectable. Chapter 1 recaps the current and near-future states of digital technologies in critical infrastructure and the implications of our near-total dependence on them. Chapters 2 and 3 describe the origins of the methodology and set the stage for the more in-depth examination that follows. Chapter 4 describes how to prepare for an engagement, and chapters 5-8 address each of the four phases. The CCE phase chapters take the reader on a more granular walkthrough of the methodology with examples from the field, phase objectives, and the steps to take in each phase. Concluding chapter 9 covers training options and looks towards a future where these concepts are scaled more broadly.
Download or read book Impact the Theory and Physical Behaviour of Colliding Solids written by Werner Goldsmith and published by . This book was released on 1960 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Armour written by Paul J. Hazell and published by CRC Press. This book was released on 2022-09-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated throughout for the new edition, Armour: Materials, Theory, and Design covers extant and emergent protection technologies driving advances in armour systems. Covering materials, theory and design, the book has applications in vehicle, ship, personnel and building use. Introducing a wide range of armour technologies, the book is a key guide to the technology used to protect against both blasts and ballistic attacks. Chapters cover bullets, blasts, jets and fragments, as well as penetration mechanics. The new edition builds on the previous one, discussing ceramics and metallic materials as well as woven fabrics and composite laminates. Detailing modern technology advancements, the second edition has also been expanded to include improved explanations on shock mechanisms and includes significantly more figures and diagrams. An essential guide to armour technology, this book outlines key ways to implement protective strategies applicable for many types of conflict.
Download or read book 101 Things I Learned in Engineering School written by John Kuprenas and published by Crown. This book was released on 2018-04-03 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing unique, accessible lessons on engineering, this title in the bestselling 101 Things I Learned® series is a perfect resource for students, recent graduates, general readers, and even seasoned professionals. An experienced civil engineer presents the physics and fundamentals underlying the many fields of engineering. Far from a dry, nuts-and-bolts exposition, 101 Things I Learned® in Engineering School uses real-world examples to show how the engineer's way of thinking can illuminate questions from the simple to the profound: Why shouldn't soldiers march across a bridge? Why do buildings want to float and cars want to fly? What is the difference between thinking systemically and thinking systematically? This informative resource will appeal to students, general readers, and even experienced engineers, who will discover within many provocative insights into familiar principles.
Download or read book Projectile Impact written by S. Syngellakis and published by WIT Press. This book was released on 2014-03-04 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: High energy impact phenomena have been investigated by engineers of various backgrounds and disciplines. Structures often need to be designed against impact or potential attack and on the other hand the removal of decommissioned structures may be achieved by shaped charge impact, alternatively known as explosive cutting. The topic of ballistic impact is wide-ranging and encompasses various levels of kinetic energy input as well as a multitude of projectile-target materials and geometries. It has thus become the object of many experimental and analytical investigations resulting in numerous sparsely-spread articles in periodicals and conference proceedings as well as monographs narrowly focusing on specific types and ranges of impact scenarios. This volume describes a broad spectrum of analytical and experimental work in this area, thus providing considerable insight into the complexity and diversity of impact phenomena. By addressing a significant number of important issues it combines, rather uniquely, subject breadth and density with in-depth study of impact events of great engineering interest.
Download or read book 5G Impact on Biomedical Engineering written by Abdallah Makhoul and published by CRC Press. This book was released on 2022-05-18 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering the importance of wireless networks in healthcare, this book is dedicated to studying the innovations and advancements of wireless networks for biomedical application and their impact. This book focuses on a wide range of wireless technologies related to healthcare and biomedical applications which include, among others, body sensor networks, mobile networks, internet of things, mobile cloud computing, pervasive computing and wearable computing. First the authors explain how biomedical applications using wireless technologies are built across networks. The authors also detail 5G spectrum splicing for medical applicatons. They then discuss how wearable computing can be used as activity recognition tools for biomedical applications through remote health monitoring and and remote health risk assessment. Finally the authors provide detailed discussions on security and privacy in wirelessly transmitted medical senor data. This book targets research-oriented and professional readers. It would fit as a recommended supplemental reading for graduate students. It also helps researchers enter the field of wireless biomedical applications.
Download or read book Engineering written by and published by . This book was released on 1908 with total page 1156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Staff Engineer written by Will Larson and published by . This book was released on 2021-02-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: At most technology companies, you'll reach Senior Software Engineer, the career level for software engineers, in five to eight years. At that career level, you'll no longer be required to work towards the next pro? motion, and being promoted beyond it is exceptional rather than ex? pected. At that point your career path will branch, and you have to decide between remaining at your current level, continuing down the path of technical excellence to become a Staff Engineer, or switching into engineering management. Of course, the specific titles vary by company, and you can replace "Senior Engineer" and "Staff Engineer" with whatever titles your company prefers.Over the past few years we've seen a flurry of books unlocking the en? gineering management career path, like Camille Fournier's The Man? ager's Path, Julie Zhuo's The Making of a Manager, Lara Hogan's Re? silient Management and my own, An Elegant Puzzle. The manage? ment career isn't an easy one, but increasingly there are maps avail? able for navigating it.On the other hand, the transition into Staff Engineer, and its further evolutions like Principal and Distinguished Engineer, remains chal? lenging and undocumented. What are the skills you need to develop to reach Staff Engineer? Are technical abilities alone sufficient to reach and succeed in that role? How do most folks reach this role? What is your manager's role in helping you along the way? Will you enjoy being a Staff Engineer or you will toil for years to achieve a role that doesn't suit you?"Staff Engineer: Leadership beyond the management track" is a pragmatic look at attaining and operate in these Staff-plus roles.
Download or read book The Effective Engineer written by Edmond Lau and published by Effective Bookshelf. This book was released on 2015-03-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing The Effective Engineer--the only book designed specifically for today's software engineers, based on extensive interviews with engineering leaders at top tech companies, and packed with hundreds of techniques to accelerate your career.
Download or read book UHPCC Under Impact and Blast written by Qin Fang and published by Springer Nature. This book was released on 2021-02-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Ultra-high Performance Cementitious Composites (UHPCC), which is a relativity new type of cementitious materials. UHPCC has very low water-to-binder ratio, high amount of high-range water reducer, fine aggregates and high-strength steel or organic fibers. With the prominent mechanical properties, e.g., high compressive and tensile strength, high ductility, and high fracture energy, UHPCC has been becoming the most prospective construction cement-based material for both civil and military structures to resist high-speed projectile penetration, low-velocity impact and blast loadings. In this book, the related work conducted by authors on the static and dynamic mechanical properties, as well as the impact and blast resistance of UHPCC are presented. This book is written for the researchers, engineers and graduate students in the fields of protective structures and terminal ballistics.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Predictive Modeling of Dynamic Processes written by Stefan Hiermaier and published by Springer Science & Business Media. This book was released on 2009-07-09 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Modeling of Dynamic Processes provides an overview of hydrocode technology, applicable to a variety of industries and areas of engineering design. Covering automotive crash, blast impact, and hypervelocity impact phenomena, this volume offers readers an in-depth explanation of the fundamental code components. Chapters include informative introductions to each topic, and explain the specific requirements pertaining to each predictive hydrocode. Successfully blending crash simulation, hydrocode technology and impact engineering, this volume fills a gap in the current competing literature available.
