Download or read book Image Quality and Radiation Dose in Cone Beam Computed Tomography for Orthodontics written by Kathryn A. Swan and published by . This book was released on 2007 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cone Beam Computed Tomography in Orthodontics written by Sunil D. Kapila and published by John Wiley & Sons. This book was released on 2014-08-29 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its introduction to dentistry, cone beam computed tomography (CBCT) has undergone a rapid evolution and considerable integration into orthodontics. However, despite the increasing popularity of CBCT and progress in applying it to clinical orthodontics, the profession has lacked a cohesive, comprehensive and objective reference that provides clinicians with the background needed to utilize this technology optimally for treating their patients. Cone Beam Computed Tomography in Orthodontics provides timely, impartial, and state-of-the-art information on the indications and protocols for CBCT imaging in orthodontics, clinical insights gained from these images, and innovations driven by these insights. As such, it is the most current and authoritative textbook on CBCT in orthodontics. Cone Beam Computed Tomography in Orthodontics is organized to progress sequentially through specific topics so as to build the knowledgebase logically in this important and rapidly evolving field. Part I provides the foundational information on CBCT technology, including radiation exposure and risks, and future evolutions in computed tomography. Part II presents the Principles and Protocols for CBCT Imaging in Orthodontics, focusing on developing evidence-based criteria for CBCT imaging, the medico-legal implications of CBCT to the professional and the protocols and integration of this technology in orthodontic practice. Part III provides critical information on CBCT-based Diagnosis and Treatment Planning that includes how to interpret CBCT scans, identify incidental pathologies and the possible other uses of this technology. Part IV covers practical aspects of CBCT’s Clinical Applications and Treatment Outcomes that encompasses a range of topics, including root morphology and position, treatment of impacted teeth, virtual surgical treatment planning and outcomes, and more.
Download or read book CONE BEAM COMPUTED TOMOGRAPHY IN ORTHODONTICS written by Dr. SHREYA SHARMA and published by Book Rivers. This book was released on 2022-02-07 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maxillofacial Cone Beam Computed Tomography written by William C. Scarfe and published by Springer. This book was released on 2018-01-04 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive description of the fundamental operational principles, technical details of acquiring and specific clinical applications of dental and maxillofacial cone beam computed tomography (CBCT). It covers all clinical considerations necessary for optimal performance in a dental setting. In addition overall and region specific correlative imaging anatomy of the maxillofacial region is described in detail with emphasis on relevant disease. Finally imaging interpretation of CBCT images is presented related to specific clinical applications. This book is the definitive resource for all who refer, perform, interpret or use dental and maxillofacial CBCT including dental clinicians and specialists, radiographers, ENT physicians, head and neck, and oral and maxillofacial radiologists.
Download or read book Cone Beam Computed Tomography written by Sara Lofthag-Hansen and published by . This book was released on 2010 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cone Beam Computed Tomography in Endodontics written by Shanon Patel and published by Quintessenz Verlag. This book was released on 2019-09-16 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, cone beam computed tomography (CBCT) has become much more widely available and utilised in all aspects of dentistry, including endodontics. Cone Beam Computed Tomography in Endodontics is designed to inform readers about the appropriate use of CBCT in endodontics, and enhance their clinical practice with this exciting imaging modality.
Download or read book Craniofacial 3D Imaging written by Onur Kadioglu and published by Springer. This book was released on 2019-01-28 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as an up-to-date reference on the use of cone-beam computed tomography for the purpose of 3D imaging of the craniofacial complex. The focus is in particular on the ways in which craniofacial 3D imaging changes how we think about conventional diagnosis and treatment planning and on its clinical applications within orthodontics and oral and maxillofacial surgery. Emphasis is placed on the value of 3D imaging in visualizing the limits of the alveolar bone, the airways, and the temporomandibular joints and the consequences for treatment planning and execution. The book will equip readers with the knowledge required in order to apply and interpret 3D imaging to the benefit of patients. All of the authors have been carefully selected on the basis of their expertise in the field. In describing current thinking on the merits of 3D craniofacial imaging, they draw both on the available scientific literature and on their own translational research findings.
Download or read book Image Quality and Radiation Dose Evaluation for Radiotherapy Cone Beam Computed Tomography written by and published by . This book was released on 2011 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Diagnosis and Treatment Planning in Orthodontics written by Jean-Marc Retrouvey and published by Springer Nature. This book was released on 2021-03-13 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This richly illustrated book is a wide-ranging guide to modern diagnostics and treatment planning in orthodontics, which are mandatory prior to the initiation of any type of comprehensive treatment. The importance of three-dimensional (3D) imaging techniques has been increasingly recognized owing to the shortcomings of conventional two-dimensional imaging in some patients, such as those requiring complex adult treatment and those with temporomandibular joint dysfunctions or sleep disturbances. In the first part of this book, readers will find clear description and illustration of the diagnostic role of the latest 3D imaging techniques, including cone beam computed tomography, intra-oral scanning, and magnetic resonance imaging. The second part explains in detail the application of 3D techniques in treatment planning for orthodontic and orthognathic surgery. Guidance is also provided on the use of image fusion software for the purposes of accurate diagnosis and precise design of the most appropriate biomechanical approach in patients with malocclusions.
Download or read book Reducing CBCT Radiation Dose and Maintaining Image Quality for Reliable Cephalometric Measurements proof of Concept written by Fedora Katz and published by . This book was released on 2017 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction: CBCT is increasingly used as tool for orthodontic diagnosis, either as an adjunct or replacement to traditional imaging techniques. Methods to reduce the increased CBCT radiation doses by optimizing exposure settings are essential for the orthodontic patient population. Methods: A human cadaver was scanned in the Morita Accuitomo 170® CBCT machine under the manufacturer recommended settings (5mA, 90kV, 3600) and multiple combinations of decreased exposure settings: 1, 2.5, 5 mA - 60, 70, 80, 90 kV - 1800 and 3600 rotation arc. Radiation dose was recorded for each exposure setting. Ten examiners (3 faculty, 7 residents) identified anatomic landmarks on 24 reconstructed cephalometric images and 7 cephalometric values were recorded. Measurement errors were compared and matched by exposure settings. Results: No significant differences in measurement errors were observed between 3600 -1800 rotation, 5mA - 2.5mA, 90kV - 80kV images. The radiation dose was reduced by 50% when mA was lowered to 2.5mA instead of 5mA and by 45% when the rotation arc was 180° instead of 360°. The lowest settings (1mA or 60kV) had increased error and were considered non-diagnostic. Conclusions: Orthodontists can lower the CBCT exposure settings in order to greatly reduce radiation dose and still maintain sufficient image quality for cephalometric diagnosis.
Download or read book Contrast Sensitivity of the Human Eye and Its Effects on Image Quality written by Peter G. J. Barten and published by SPIE Press. This book was released on 1999 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the contrast sensitivity of the human visual system - concerning the eye's ability to distinguish objects from each other or from the background - and its effects on the imageforming process. The text provides equations for determining various aspects of contrast sensitivity, in addition to models that easily can be used for practical applications.
Download or read book Cone Beam CT and 3D imaging written by Pietro Caruso and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone beam computed tomography (CBCT) has become the standard of reference in dental imaging. The distribution of CBCT devices is increasingly wide, and the number of required examinations is constantly growing. In this setting, it is now essential that medical and technical staff receive specific training in the use of CBCT and that technical guidelines for CBCT examinations are established. This clearly structured book on CBCT will be an ideal aid in daily clinical practice. It clearly explains basic CBCT anatomy, examination technique, and the use of 3D reformatting software. A wide range of cases are presented, covering the most frequent and relevant conditions and pathologies, including dental anomalies, inflammatory and degenerative disease, tumors, and implants.
Download or read book Guidelines for the Use of Radiographs in Clinical Orthodontics written by Keith Geoffrey Isaacson and published by . This book was released on 2001 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computed Tomography written by Ahmet Mesrur Halefoğlu and published by BoD – Books on Demand. This book was released on 2017-08-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent and rapid diffusion of advanced multidetector-row scanner technology offers comprehensive evaluation of different anatomic structures in daily practice. The aim of this book is to introduce the applications of CT imaging in not only general medicine but also in different fields especially in veterinary medicine, dentistry, and engineering. Recent developments in CT technology have led to a widening of its applications on many areas like material testing in engineering, 3D evaluation of teeth, and the vascular and cardiac evaluations of small animals.
Download or read book Cone Beam Computed Tomography written by Prashant P Jaju and published by JP Medical Ltd. This book was released on 2015-05-10 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Beam Computed Tomography is an imaging technique in which x-rays diverge to form a cone. Cone Beam Computed Tomography: A Clinician’s Guide to 3D Imaging is a concise, highly illustrated manual on this increasingly important form of imaging in dentistry. Divided into twelve chapters, the book begins with a history of Cone Beam Computed Tomography, followed by chapters on the physics and apparatus of CBCT and the need for CBCT in dentistry. Further chapters cover the role of CBCT in specific sub-specialties of dentistry, and a glossary provides an explanation of CBCT terminology. The role of CBCT in prosthodontics, orthodontics and airway analysis, endodontics and caries diagnosis, oral and maxillofacial pathologies, periodontal disease and forensic odontology, is described in detail. This book also brings the reader up to date on possible future applications of CBCT in dentistry. Cone Beam Computed Tomography: A Clinician’s Guide to 3D Imaging includes 180 full colour images and illustrations, further enhancing this invaluable resource for dentists. Key Points Concise guide to 3D imaging in dentistry Includes a history and basics of CBCT, as well as the role of CBCT in various dentistry sub-specialties 189 full colour images and illustrations
Download or read book Interpretation Basics of Cone Beam Computed Tomography written by Shawneen M. Gonzalez and published by John Wiley & Sons. This book was released on 2021-11-09 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation Basics of Cone Beam Computed Tomography, Second Edition is a practical identification guide for interpreting CBCT findings in dental practice. Offering multiple high-quality images for each example provided, this easy-to-use guide is designed for those new to CBCT scans as well as more experienced practitioners in need of a reference tool of normal anatomy, common anatomical variants, and incidental findings. Extensively revised throughout, the Second Edition features a brand-new chapter on findings of the maxilla and mandible, and additional incidental findings and common anatomical variants. Every chapter in the book now includes sections covering anatomic variations, developmental anomalies, pathosis, and other considerations. All information has been carefully reviewed and updated to incorporate recent research in the field and reflect newer guidelines from various specialty organizations. This new edition: Enables rapid reference to common CBCT findings, with multiple images for each finding Features a streamlined framework that makes relevant information easier to find and apply in dental practice Offers hundreds of new images to aid in correctly identifying findings Contains new and updated content, including expanded coverage of CBCT and implants Provides sample reports and explains how they are used in day-to-day clinical practice Interpretation Basics of Cone Beam Computed Tomography, Second Edition remains a must-have resource for all dental practitioner and specialists who use CBCT, dental students in radiology interpretation courses, and residents beginning to use CBCT in their specialty.
Download or read book Nationwide Evaluation of X ray Trends written by Nationwide Evaluation of X-ray Trends Task Force and published by . This book was released on 1976 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
