Download or read book Image Processing of Edge and Surface Defects written by Roman Louban and published by Springer. This book was released on 2010-04-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The human ability to recognize objects on various backgrounds is amazing. Many times, industrial image processing tried to imitate this ability by its own techniques. This book discusses the recognition of defects on free-form edges and - homogeneous surfaces. My many years of experience has shown that such a task can be solved e?ciently only under particular conditions. Inevitably, the following questions must be answered: How did the defect come about? How and why is a person able to recognize a speci?c defect? In short, one needs an analysis of the process of defect creation as well as an analysis of its detection. As soon as the principle of these processes is understood, the processes can be described mathematically on the basis of an appropriate physical model and can then be captured in an algorithm for defect detection. This approach can be described as “image processing from a physicist’s perspective”. I have successfully used this approach in the development of several industrial image processingsystemsandimprovedupontheminthecourseoftime.Iwouldlike to present the achieved results in a hands-on book on the basis of edge-based algorithms for defect detection on edges and surfaces. I would like to thank all who have supported me in writing this book.

Download or read book Image Processing of Edge and Surface Defects written by Roman Louban and published by Springer Science & Business Media. This book was released on 2009-09-16 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The human ability to recognize objects on various backgrounds is amazing. Many times, industrial image processing tried to imitate this ability by its own techniques. This book discusses the recognition of defects on free-form edges and - homogeneous surfaces. My many years of experience has shown that such a task can be solved e?ciently only under particular conditions. Inevitably, the following questions must be answered: How did the defect come about? How and why is a person able to recognize a speci?c defect? In short, one needs an analysis of the process of defect creation as well as an analysis of its detection. As soon as the principle of these processes is understood, the processes can be described mathematically on the basis of an appropriate physical model and can then be captured in an algorithm for defect detection. This approach can be described as “image processing from a physicist’s perspective”. I have successfully used this approach in the development of several industrial image processingsystemsandimprovedupontheminthecourseoftime.Iwouldlike to present the achieved results in a hands-on book on the basis of edge-based algorithms for defect detection on edges and surfaces. I would like to thank all who have supported me in writing this book.

Download or read book Surface Defect Detector on Image Processing Based on Matlab written by Mireya Alegre Alonso and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2348 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at the University of Washington, Seattle on July 30 to August 4, 1995. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the Department of Energy, the National Institute of Standards and Technology, the Federal Aviation Administration, the National Science Foundation IndustryiUniversity Cooperative Research Centers, and the Working Group in Quantitative NDE. This year's Review of Progress in QNDE was attended by approximately 450 participants from the US and many foreign countries who presented over 375 papers. The meeting was divided into 36 sessions with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included many important methods of inspection science from acoustics to x-rays. In the last several years, the Review has stabilized at about its current size. Most participants seem to agree it is large enough to permit a full-scale overview of the latest developments but still small enough to retain the collegial atmosphere which has marked the Review since its inception. The Proceedings are structured in a format to reflect the organization of the Review itself, producing a more logical organization for both the meeting and the present volume.

Download or read book Proceedings of the 3rd International Conference on Electrical and Information Technologies for Rail Transportation EITRT 2017 written by Limin Jia and published by Springer. This book was released on 2018-03-29 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation. The topics cover novel traction drive technologies of rail transportation, safety technology of rail transportation system, rail transportation information technology, rail transportation operational management technology, rail transportation cutting-edge theory and technology etc. The proceedings can be a valuable reference work for researchers and graduate students working in rail transportation, electrical engineering and information technologies.

Download or read book Image Analysis and Evaluation of Cylinder Bore Surfaces in Micrographs written by Wang, Limeng and published by KIT Scientific Publishing. This book was released on 2014-08-27 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents two image-based inspection approaches for the quality evaluation of cylinder bore surfaces. In the first algorithm, metal folds on plateau-honed surfaces are inspected with scanning electron microscopy. An edge-aware structure tensor is proposed for feature extraction and localization of surface defects. The second algorithm uses a morphgraphical method for detecting graphite grains in optical micrographs. Based on the inspection results, quality parameters are proposed.

Download or read book Defect Recognition and Image Processing in Semiconductors 1997 written by J. Doneker and published by Routledge. This book was released on 2017-11-22 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect Recognition and Image Processing in Semiconductors 1997 provides a valuable overview of current techniques used to assess, monitor, and characterize defects from the atomic scale to inhomogeneities in complete silicon wafers. This volume addresses advances in defect analyzing techniques and instrumentation and their application to substrates, epilayers, and devices. The book discusses the merits and limits of characterization techniques; standardization; correlations between defects and device performance, including degradation and failure analysis; and the adaptation and application of standard characterization techniques to new materials. It also examines the impressive advances made possible by the increase in the number of nanoscale scanning techniques now available. The book investigates defects in layers and devices, and examines the problems that have arisen in characterizing gallium nitride and silicon carbide.

Download or read book Applications of Computer Vision in Automation and Robotics written by Krzysztof Okarma and published by MDPI. This book was released on 2021-01-28 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research results related to various applications of computer vision methods in the widely understood contexts of automation and robotics. As the current progress of image analysis applications may be easily observed in various areas of everyday life, it becomes one of the most essential elements of development of Industry 4.0 solutions. Some of the examples, partially discussed in individual chapters, may be related to the visual navigation of mobile robots and drones, monitoring of industrial production lines, non-destructive evaluation and testing, monitoring of the IoT devices or the 3D printing process and the quality assessment of manufactured objects, video surveillance systems, and decision support in autonomous vehicles.

Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 2001 with total page 1402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Nature Inspired Optimization Algorithms The State of the Art written by Ali Wagdy Mohamed and published by Springer Nature. This book was released on 2022-09-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent contributions and significant development, advanced issues, and challenges. In real-world problems and applications, most of the optimization problems involve different types of constraints. These problems are called constrained optimization problems (COPs). The optimization of the constrained optimization problems is considered a challenging task since the optimum solution(s) must be feasible. In their original design, evolutionary algorithms (EAs) are able to solve unconstrained optimization problems effectively. As a result, in the past decade, many researchers have developed a variety of constraint handling techniques, incorporated into (EAs) designs, to counter this deficiency. The main objective for this book is to make available a self-contained collection of modern research addressing the general constrained optimization problems in many real-world applications using nature-inspired optimization algorithms. This book is suitable for a graduate class on optimization, but will also be useful for interested senior students working on their research projects.

Download or read book Advances in Intelligent Manufacturing and Service System Informatics written by Zekâi Şen and published by Springer Nature. This book was released on 2023-11-02 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 12th International Symposium on Intelligent Manufacturing and Service Systems 2023. The contents of this volume focus on recent technological advances in the field of artificial intelligence in manufacturing & service systems including machine learning, autonomous control, bioinformatics, human-artificial intelligence interaction, digital twin, robotic systems, sybersecurity, etc. This volume will prove a valuable resource for those in academia and industry.

Download or read book ICT Analysis and Applications written by Simon Fong and published by Springer Nature. This book was released on 2022-01-07 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes new technologies and discusses future solutions for ICT design infrastructures, as reflected in high-quality papers presented at the 6th International Conference on ICT for Sustainable Development (ICT4SD 2021), held in Goa, India, on 5–6 August 2021. The book covers the topics such as big data and data mining, data fusion, IoT programming toolkits and frameworks, green communication systems and network, use of ICT in smart cities, sensor networks and embedded system, network and information security, wireless and optical networks, security, trust, and privacy, routing and control protocols, cognitive radio and networks, and natural language processing. Bringing together experts from different countries, the book explores a range of central issues from an international perspective.

Download or read book Advances and Trends in Artificial Intelligence Theory and Practices in Artificial Intelligence written by Hamido Fujita and published by Springer Nature. This book was released on 2022-08-29 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 35th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2022, held in Kitakyushu, Japan, in July 2022. The 67 full papers and 11 short papers presented were carefully reviewed and selected from 127 submissions. The IEA/AIE 2022 conference focuses on focuses on applications of applied intelligent systems to solve real-life problems in all areas including business and finance, science, engineering, industry, cyberspace, bioinformatics, automation, robotics, medicine and biomedicine, and human-machine interactions.

Download or read book Proceedings of the 2010 Joint Workshop of Fraunhofer IOSB and Institute for Anthropomatics Vision and Fusion Laboratory written by Jürgen Beyerer and published by KIT Scientific Publishing. This book was released on 2014-08-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the annual Joint Workshop of the Fraunhofer IOSB and the Karlsruhe Institute of Technology (KIT), Vision and Fusion Laboratory, the students of both institutions present their latest research findings on image processing, visual inspection, pattern recognition, tracking, SLAM, information fusion, non-myopic planning, world modeling, security in surveillance, interoperability, and human-computer interaction. This book is a collection of 16 reviewed technical reports of the 2010 Joint Workshop.

Download or read book Intelligent Data Engineering and Automated Learning IDEAL 2019 written by Hujun Yin and published by Springer Nature. This book was released on 2019-11-07 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set of LNCS 11871 and 11872 constitutes the thoroughly refereed conference proceedings of the 20th International Conference on Intelligent Data Engineering and Automated Learning, IDEAL 2019, held in Manchester, UK, in November 2019. The 94 full papers presented were carefully reviewed and selected from 149 submissions. These papers provided a timely sample of the latest advances in data engineering and machine learning, from methodologies, frameworks, and algorithms to applications. The core themes of IDEAL 2019 include big data challenges, machine learning, data mining, information retrieval and management, bio-/neuro-informatics, bio-inspired models (including neural networks, evolutionary computation and swarm intelligence), agents and hybrid intelligent systems, real-world applications of intelligent techniques and AI.

Download or read book Practical Guide to Image Analysis written by ASM International and published by ASM International. This book was released on 2000-01-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nine international specialists contribute information about the use of image analysis procedures to evaluate microstructural features. Coverage includes an historical overview of how quantitative image analysis developed; the evolution of current television computer-based analysis systems; the scien