Download or read book Image Correlation for Shape Motion and Deformation Measurements written by Michael A. Sutton and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Correlation for Shape, Motion and Deformation Measurements provides a comprehensive overview of data extraction through image analysis. Readers will find and in-depth look into various single- and multi-camera models (2D-DIC and 3D-DIC), two- and three-dimensional computer vision, and volumetric digital image correlation (VDIC). Fundamentals of accurate image matching are described, along with presentations of both new methods for quantitative error estimates in correlation-based motion measurements, and the effect of out-of-plane motion on 2D measurements. Thorough appendices offer descriptions of continuum mechanics formulations, methods for local surface strain estimation and non-linear optimization, as well as terminology in statistics and probability. With equal treatment of computer vision fundamentals and techniques for practical applications, this volume is both a reference for academic and industry-based researchers and engineers, as well as a valuable companion text for appropriate vision-based educational offerings.

Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.

Download or read book Optical Measurements Modeling and Metrology Volume 5 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Download or read book Application of Imaging Techniques to Mechanics of Materials and Structures Volume 4 written by Tom Proulx and published by Springer. This book was released on 2012-08-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.

Download or read book Computer Vision Computer Graphics Collaboration Techniques written by André Gagalowicz and published by Springer Science & Business Media. This book was released on 2009-04-22 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Computer Vision/Computer Graphics Collaboration Techniques, MIRAGE 2009, held in Rocquencourt, France, in May 2009. The 41 revised full papers presented were carefully reviewed and selected from a total of 83 submissions. The papers cover a wide range of topics with focus on Computer Vision/Computer Graphics collaboration techniques involving image analysis/synthesis approaches especially concerning theoretical, computational, experimental or industrial aspects of model-based image analysis and image-based model synthesis.

Download or read book Advancement of Optical Methods Digital Image Correlation in Experimental Mechanics Volume 3 written by Luciano Lamberti and published by Springer. This book was released on 2018-10-11 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: New Developments in Optical Methods & Fringe Pattern Analysis; DIC Applications for Challenging Environments; Optical Methods in SEM: History & Perspective; Mechanical Characterization of Materials & Structures with Optical Methods; Bioengineering.

Download or read book Advancement of Optical Methods in Experimental Mechanics Volume 3 written by Luciano Lamberti and published by Springer. This book was released on 2017-11-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods in Experimental Mechanics, Volume 3 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas.

Download or read book Imaging Methods for Novel Materials and Challenging Applications Volume 3 written by Helena Jin and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Imaging Methods for Novel Materials and Challenging Applications, Volume 3: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the third volume of seven from the Conference, brings together 62 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Role of optical interferometry in advancement of material characterization Three-dimensional imaging and volumetric correlation Digital holography and experimental mechanics Digital image correlation Metrology and displacement measurement at different scales Optical methods for dynamic tests Optical methods for and with MEMS and NEMS Thermomechanics and infrared imaging Imaging methods applied to biomaterials and soft materials Applied photoelasticity Optical measurement systems using polarized light Hybrid imaging techniques Contouring of surfaces Novel optical techniques

Download or read book IGA Non Invasive Coupling with FEM and Regularization of Digital Image Correlation Problems Volume 2 written by Robin Bouclier and published by John Wiley & Sons. This book was released on 2023-07-26 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Isogeometric analysis (IGA) consists of using the same higher-order and smooth spline functions for the representation of geometry in Computer Aided Design as for the approximation of solution fields in Finite Element Analysis. Now, almost twenty years after its creation, substantial works are being reported in IGA, making it very competitive in scientific computing. This book proposes to use IGA jointly with standard finite element methods (FEM), presenting IGA as a projection of FEM on a more regular reduced basis. By shedding new light on how IGA relates to FEM, we can see how IGA can be implemented on top of an FE code in order to improve the solution of problems that require more regularity. This is illustrated by using IGA with FEM in a non-invasive fashion to perform efficient and robust multiscale global/local simulations in solid mechanics. Furthermore, we show that IGA can regularize the inverse problem of FE digital image correlation in experimental mechanics.

Download or read book Application of Imaging Techniques to Mechanics of Materials and Structures Volume 4 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.

Download or read book Advanced Nanoindentation in Materials written by Ting Tsui and published by MDPI. This book was released on 2018-03-05 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advanced Nanoindentation in Materials" that was published in Materials

Download or read book Advanced Biomaterials for Orthopaedic Application written by Saverio Affatato and published by MDPI. This book was released on 2020-06-18 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics in the orthopaedic fields and can be used as a textbook for the final undergraduate engineering course or as a topic on tribology at the postgraduate level. This book can serve as a useful reference for academics, tribology, and materials researchers; mechanical, materials, and physics engineers; biomedical scientists and professionals in tribology; and related industries. The scientific interest in this book will be evident for many important centres of research, including laboratories and universities throughout the world.

Download or read book International Digital Imaging Correlation Society written by Michael Sutton and published by Springer. This book was released on 2017-03-30 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a single volume of technical papers presented at the Annual International DIC Society Conference and SEM Fall Conference organized by the Society for Experimental Mechanics and Sandia National Laboratories and held in Philadelphia, PA, November 7-10, 2016. The volume presents early findings from experimental, standards development and various other investigations concerning digital image correlation - an important area within Experimental Mechanics. The area of Digital Image Correlation has been an integral track within the SEM Annual Conference spearheaded by Professor Michael Sutton from the University of South Carolina. In 2016, the SEM and Sandia joined their collaborative strengths to launch a standing fall meeting focusing specifically on developments in the area of Digital Image Correlation. The contributed papers within this volume span numerous technical aspects of DIC including standards development for the industry.

Download or read book Handbook of Experimental Structural Dynamics written by Randall Allemang and published by Springer Nature. This book was released on 2022-06-30 with total page 1426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SEM Handbook of Experimental Structural Dynamics stands as a comprehensive overview and reference for its subject, applicable to workers in research, product design and manufacture, and practice. The Handbook is devoted primarily to the areas of structural mechanics served by the Society for Experimental Mechanics IMAC community, such as modal analysis, rotating machinery, structural health monitoring, shock and vibration, sensors and instrumentation, aeroelasticity, ground testing, finite element techniques, model updating, sensitivity analysis, verification and validation, experimental dynamics sub-structuring, quantification of margin and uncertainty, and testing of civil infrastructure. Chapters offer comprehensive, detailed coverage of decades of scientific and technologic advance and all demonstrate an experimental perspective. Several sections specifically discuss the various types of experimental testing and common practices utilized in the automotive, aerospace, and civil structures industries. · History of Experimental Structural Mechanics · DIC Methods - Dynamic Photogrammetry · LDV Methods · Applied Digital Signal Processing · Introduction to Spectral - Basic Measurements · Structural Measurements - FRF · Random and Shock Testing · Rotating System Analysis Methods · Sensors Signal Conditioning Instrumentation · Design of Modal Tests · Experimental Modal Methods · Experimental Modal Parameter Evaluation · Operating Modal Analysis Methods · Analytical Numerical Substructuring · Finite Element Model Correlation · Model Updating · Damping of Materials and Structures · Model Calibration and Validation in Structures · Uncertainty Quantification: UQ, QMU and Statistics · Nonlinear System Analysis Methods (Experimental) · Structural Health Monitoring and Damage Detection · Experimental Substructure Modeling · Modal Modeling · Response (Impedance) Modeling · Nonlinear Normal Mode Analysis Techniques (Analytical) · Modal Modeling with Nonlinear Connection Elements (Analytical) · Acoustics of Structural Systems (VibroAcoustics) · Automotive Structural Testing · Civil Structural Testing · Aerospace Perspective for Modeling and Validation · Sports Equipment Testing · Applied Math for Experimental Structural Mechanics Contributions present important theory behind relevant experimental methods as well as application and technology. Topical authors emphasize and dissect proven methods and offer detail beyond a simple review of the literature. Additionally, chapters cover practical needs of scientists and engineers who are new to the field. In most cases, neither the pertinent theory nor, in particular, the practical issues have been presented formally in current academic textbooks. Each chapter in the Handbook represents a ’must read’ for someone new to the subject or for someone returning to the field after an absence. Reference lists in each chapter consist of the seminal papers in the literature. This Handbook stands in parallel to the SEM Handbook of Experimental Solid Mechanics, where this Handbook focuses on experimental dynamics of structures at a macro-scale often involving multiple components and materials where the SEM Handbook of Experimental Solid Mechanics focuses on experimental mechanics of materials at a nano-scale and/or micro-scale.

Download or read book Advancements in Optical Methods Digital Image Correlation in Experimental Mechanics Volume 3 written by Ming-Tzer Lin and published by Springer Nature. This book was released on 2019-12-04 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: DIC Methods & Its Applications Photoelsticity and Interferometry ApplicationsMicro-Optics and Microscopic SystemsMultiscale and New Developments in Optical MethodsDIC and its Applications for Inverse Problems

Download or read book Shock Vibration Aircraft Aerospace Energy Harvesting Acoustics Optics Volume 9 written by Julie M. Harvie and published by Springer. This book was released on 2017-04-17 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock & Vibration, Aircraft/Aerospace and Energy Harvesting, Volume 9: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the ninth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Shock & Vibration, Aircraft/Aerospace and Energy Harvesting including papers on: Shock & Vibration Testing Aircraft/Aerospace Applications Optical Techniques: Digital Image Correlation Vibration Suppression & Control Damage Detection Energy Harvesting

Download or read book Full Field Measurements and Identification in Solid Mechanics written by Michel Grediac and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents cutting-edge developments by experts in the field on the rapidly developing and scientifically challenging area of full-field measurement techniques used in solid mechanics – including photoelasticity, grid methods, deflectometry, holography, speckle interferometry and digital image correlation. The evaluation of strains and the use of the measurements in subsequent parameter identification techniques to determine material properties are also presented. Since parametric identification techniques require a close coupling of theoretical models and experimental measurements, the book focuses on specific modeling approaches that include finite element model updating, the equilibrium gap method, constitutive equation gap method, virtual field method and reciprocity gap method. In the latter part of the book, the authors discuss two particular applications of selected methods that are of special interest to many investigators: the analysis of localized phenomenon and connections between microstructure and constitutive laws. The final chapter highlights infrared measurements and their use in the mechanics of materials. Written and edited by knowledgeable scientists, experts in their fields, this book will be a valuable resource for all students, faculties and scientists seeking to expand their understanding of an important, growing research area