Download or read book Oversampling A D Converters with Improved Signal Transfer Functions written by Bupesh Pandita and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques for designing complex, discrete-time ΔΣ ADCs with signal-transfer functions that significantly filter interfering signals. The book provides an understanding of theory, issues, and implementation of discrete complex ΔΣ ADCs. The concepts developed in each chapter are further explained by applying them to a target application of ΔΣ ADCs in DTV receivers.

Download or read book High Voltage Thermionic Converters written by General Motors Corporation. Allison Division and published by . This book was released on 1964 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several emitter materials, tantalum, tungsten and rhenium, and two emitter geometries, planar and excess area were evaluated in a flexible laboratory thermionic converter design. Results are reported from six converters that were tested for a total of 1070 hr. Experimental results from the excess area emitter converters did not exhibit the current enhancement observed in multicapillary and slotted emitter converters developed on a previous Air Force contract. While the electron currents in the passive mode at relatively low cesium pressure were in qualitative agreement with theory, the actual current densities obtained were not high enough to produce practical power densities at high output voltage. The method of emitter fabrication which used a niobium braze material appears to be a primary reason for the low performance.

Download or read book Calibration Techniques in Nyquist A D Converters written by Hendrik van der Ploeg and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses different A/D-converter architectures with an emphasis on the maximum achievable power efficiency. It also provides an accessible overview of the state-of-the art in calibration techniques for Nyquist A/D converters. The calibration techniques presented are applicable to other analog-to-digital systems, such as those applied in integrated receivers. They allow implementation without introducing a speed or power penalty.

Download or read book Digital Converters for Image Sensors written by Kenton T. Veeder and published by . This book was released on 2015 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for image sensor professionals and those interested in the boundary between sensor systems and analog and mixed-signal integrated circuit design. It provides in-depth tips and techniques necessary to understand and implement these two types of complex circuit systems together for a wide variety of architectures or trade off one against another. The tutorial begins with a brief introduction to the history and definition of a digital image sensor, as well as converter characteristics, before addressing DAC and ADC architectures. Later chapters cover pipeline ADC designs, digital correction, calibration, and testing according to IEEE standards.

Download or read book NASA Technical Translation written by and published by . This book was released on 1965 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance D A Converters written by Martin Clara and published by Springer Science & Business Media. This book was released on 2012-12-22 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with modeling and implementation of high performance, current-steering D/A-converters for digital transceivers in nanometer CMOS technology. In the first part, the fundamental performance limitations of current-steering DACs are discussed. Based on simplified models, closed-form expressions for a number of basic non-ideal effects are derived and tested. With the knowledge of basic performance limits, the converter and system architecture can be optimized in an early design phase, trading off circuit complexity, silicon area and power dissipation for static and dynamic performance. The second part describes four different current-steering DAC designs in standard 130 nm CMOS. The converters have a resolution in the range of 12-14 bits for an analog bandwidth between 2.2 MHz and 50 MHz and sampling rates from 100 MHz to 350 MHz. Dynamic-Element-Matching (DEM) and advanced dynamic current calibration techniques are employed to minimize the required silicon area.

Download or read book NASA SP written by and published by . This book was released on 1976 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Converters for Wireless Standards written by Chunlei Shi and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the design of data converters for emerging standards and introduces the underlying circuit design principles. It is an excellent reference for IC and mixed signal designers, design managers and project leaders in industry, particularly those in the wireless semiconductor industry.

Download or read book Studies on Selected Topics in Radio Frequency Digital to Analog Converters written by Mohammad Reza Sadeghifar and published by Linköping University Electronic Press. This book was released on 2019-10-14 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The network latency in fifth generation mobile technology (5G) will be around one millisecond which is much lower than in 4G technology. This significantly faster response time together with higher information capacity and ultra-reliable communication in 5G technology will pave the way for future innovations in a smart and connected society. This new 5G network should be built on a reasonable wireless infrastructure and 5G radio base-stations that can be vastly deployed. That is, while the electrical specification of a radio base-station in 5G should be met in order to have the network functioning, the size, weight and power consumption of the radio system should be optimized to be able to commercially deploy these radios in a huge network. As the number of antenna elements increases in massive multiple-input multiple-output based radios such as in 5G, designing true multi-band base-station radios, with efficient physical size, power consumption and cost in emerging cellular bands especially in mid-bands (frequencies up to 10~GHz), is becoming a challenge. This demands a hard integration of radio components; particularly the radio's digital application-specific integrated circuits (ASIC) with high-performance energy-efficient multi-band data converters. In this dissertation radio frequency digital-to-analog converter (RF DAC) and semi-digital finite-impulse response (FIR) filter digital-to-analog converter has been studied. Different techniques are used in these structures to improve the transmitter's overall performance. In the RF DAC part, a radio frequency digital-to-analog converter solution is presented, which is capable of monolithic integration into today's digital ASIC due to its digital-in-nature architecture, while fulfills the stringent requirements of cellular network radio base station linearity and bandwidth. A voltage-mode conversion method is used as output stage, and configurable mixing logic is employed in the data path to create a higher frequency lobe and utilize the output signal in the first or the second Nyquist zone and hence achieving output frequencies up to the sample rate. In the semi-digital FIR part, optimization problem formulation for semi-digital FIR digital-to-analog converter is investigated. Magnitude and energy metrics with variable coefficient precision are defined for cascaded digital Sigma-Delta modulators, semi-digital FIR filter, and Sinc roll-off frequency response of the DAC. A set of analog metrics as hardware cost is also defined to be included in semi-digital FIR DAC optimization problem formulation. It is shown that hardware cost of the semi-digital FIR DAC, can be reduced by introducing flexible coefficient precision in filter optimization while the semi-digital FIR DAC is not over-designed either. Different use cases are selected to demonstrate the optimization problem formulations. A combination of magnitude metric, energy metric, coefficient precision and analog metric are used in different use cases of the optimization problem formulation and solved to find out the optimum set of analog FIR taps. Moreover, a direct digital-to-RF converter (DRFC) is presented in this thesis where a semi-digital FIR topology utilizes voltage-mode RF DAC cells to synthesize spectrally clean signals at RF frequencies. Due to its digital-in-nature design, the DRFC benefits from technology scaling and can be monolithically integrated into advance digital VLSI systems. A fourth-order single-bit quantizer bandpass digital Sigma-Delta modulator is used preceding the DRFC, resulting in a high in-band signal-to-noise ratio (SNR). The out-of-band spectrally-shaped quantization noise is attenuated by an embedded semi-digital FIR filter. The RF output frequencies are synthesized by a configurable voltage-mode RF DAC solution with a high linearity performance. A compensation technique to cancel the code-dependent supply current variation in voltage-mode RF DAC for radio frequency direct digital frequency synthesizer is also presented in this dissertation and is studied analytically. The voltage-mode RF DAC and the compensation technique are mathematically modeled and system-level simulation is performed to support the analytical discussion.

Download or read book Popular Science written by and published by . This book was released on 1965-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.

Download or read book Robust Sigma Delta Converters written by Robert H.M. van Veldhoven and published by Springer Science & Business Media. This book was released on 2011-01-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sigma Delta converters are a very popular choice for the A/D converter in multi-standard, mobile and cellular receivers. Key A/D converter specifications are high dynamic range, robustness, scalability, low-power and low EMI. Robust Sigma Delta Converters presents a requirement derivation of a Sigma Delta modulator applied in a receiver for cellular and connectivity, and shows trade-offs between RF and ADC. The book proposes to categorize these requirements in 5 quality indicators which can be used to qualify a system, namely accuracy, robustness, flexibility, efficiency and emission. In the book these quality indicators are used to categorize Sigma Delta converter theory. A few highlights on each of these quality indicators are; Quality indicators: provide a means to quantify system quality. Accuracy: introduction of new Sigma Delta Modulator architectures. Robustness: a significant extension on clock jitter theory based on phase and error amplitude error models. Extension of the theory describing aliasing in Sigma Delta converters for different types of DACs in the feedback loop. Flexibility: introduction of a Sigma Delta converter bandwidth scaling theory leading to very flexible Sigma Delta converters. Efficiency: introduction of new Figure-of-Merits which better reflect performance-power trade-offs. Emission: analysis of Sigma Delta modulators on emission is not part of the book The quality indicators also reveal that, to exploit nowadays advanced IC technologies, things should be done as much as possible digital up to a limit where system optimization allows reducing system margins. At the end of the book Sigma Delta converter implementations are shown which are digitized on application-, architecture-, circuit- and layout-level. Robust Sigma Delta Converters is written under the assumption that the reader has some background in receivers and in A/D conversion.

Download or read book Model Predictive Control of High Power Converters and Industrial Drives written by Tobias Geyer and published by John Wiley & Sons. This book was released on 2017-02-28 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this original book on model predictive control (MPC) for power electronics, the focus is put on high-power applications with multilevel converters operating at switching frequencies well below 1 kHz, such as medium-voltage drives and modular multi-level converters. Consisting of two main parts, the first offers a detailed review of three-phase power electronics, electrical machines, carrier-based pulse width modulation, optimized pulse patterns, state-of-the art converter control methods and the principle of MPC. The second part is an in-depth treatment of MPC methods that fully exploit the performance potential of high-power converters. These control methods combine the fast control responses of deadbeat control with the optimal steady-state performance of optimized pulse patterns by resolving the antagonism between the two. MPC is expected to evolve into the control method of choice for power electronic systems operating at low pulse numbers with multiple coupled variables and tight operating constraints it. Model Predictive Control of High Power Converters and Industrial Drives will enable to reader to learn how to increase the power capability of the converter, lower the current distortions, reduce the filter size, achieve very fast transient responses and ensure the reliable operation within safe operating area constraints. Targeted at power electronic practitioners working on control-related aspects as well as control engineers, the material is intuitively accessible, and the mathematical formulations are augmented by illustrations, simple examples and a book companion website featuring animations. Readers benefit from a concise and comprehensive treatment of MPC for industrial power electronics, enabling them to understand, implement and advance the field of high-performance MPC schemes.

Download or read book A Dictionary of Electronics and Electrical Engineering written by Andrew Butterfield and published by Oxford University Press. This book was released on 2018-06-14 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This popular dictionary, formerly published as the Penguin Dictionary of Electronics, has been extensively revised and updated, providing more than 5,000 clear, concise, and jargon-free A-Z entries on key terms, theories, and practices in the areas of electronics and electrical science. Topics covered include circuits, power, systems, magnetic devices, control theory, communications, signal processing, and telecommunications, together with coverage of applications areas such as image processing, storage, and electronic materials. The dictionary is enhanced by dozens of equations and nearly 400 diagrams. It also includes 16 appendices listing mathematical tables and other useful data, including essential graphical and mathematical symbols, fundamental constants, technical reference tables, mathematical support tools, and major innovations in electricity and electronics. More than 50 useful web links are also included with appropriate entries, accessible via a dedicated companion website. A Dictionary of Electronics and Electrical Engineering is the most up-to-date quick reference dictionary available in its field, and is a practical and wide-ranging resource for all students of electronics and of electrical engineering.

Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 1997 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Manual of Photography written by Elizabeth Allen and published by Taylor & Francis. This book was released on 2012-11-12 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tenth edition of The Manual of Photography is an indispensable textbook for anyone who is serious about photography. It is ideal if you want to gain insight into the underlying scientific principles of photography and digital imaging, whether you are a professional photographer, lab technician, researcher or student in the field, or simply an enthusiastic amateur. This comprehensive guide takes you from capture to output in both digital and film media, with sections on lens use, darkroom techniques, digital cameras and scanners, image editing techniques and processes, workflow, digital file formats and image archiving. This iconic text was first published in 1890 and has aided many thousands of photographers in developing their own techniques and understanding of the medium. Now in full colour, The Manual of Photography still retains its clear, reader-friendly style and is filled with images and illustrations demonstrating the key principles. Not only giving you the skills and know-how to take stunning photographs, but will also allowing you to fully understand the science behind the creation of great images.

Download or read book Data Converters written by Franco Maloberti and published by Springer Science & Business Media. This book was released on 2007-02-22 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first graduate-level textbook presenting a comprehensive treatment of Data Converters. The advancement of digital electronics urged the availability of a still missing support for teaching and self-learning analog-digital interfaces at many levels: the specification, the conversion methods and architectures, the circuit design and the testing. This book, after the necessary study of the background theoretical elements, covers aspects and provide elements for a deep and comprehensive knowledge. The breath and the level of details of topics is enhanced by introductory material in each chapter and the use of many examples, most of them in the form of computer behavioral simulations. The examples and the end-of-chapter problems help in understanding and favor self-practice using tools that are effective for training and for design activity. Data Converters is a textbook that is also essential for engineering professionals as it was written for responding to a shortage of organically organized material on the topic. The book assumes a solid background in analog and digital circuits as well as a working knowledge of simulation tools for circuit and behavioral analysis. A background on statistical analysis is also helpful, though not strictly necessary. Coverage of all the basic elements essential for a clear understanding of sampling, quantization, noise in sampled-data systems and mathematical tools for sampled-data linear systems Comprehensive definition of the parameters used to specify data converters and necessary for understanding product data sheets Coverage of all the architectures used in Nyquist-rate data converters and detailed study of features, limits and design techniques Detailed study of oversampled and Sigma-Delta converters with simulation examples and use of spectra and histograms for a clear understanding of features and limit if the noise shaping Coverage of digital correction and calibration techniques for enhancing performances Use of theory and intuitive views to explain circuits and systems operation and limits Coverage of testing methods and description of the data processing used for testing and characterization Extensive use of Simulink and Matlab in examples and problem sets to assist reader comprehension and favor deeper study

Download or read book NASA Patent Abstracts Bibliography written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Program and published by . This book was released on 1994 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: