Download or read book Image based Metrology for Nanoscale Lamellar Structures written by Prabu Ravindran and published by . This book was released on 2010 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Image Based Metrology for Nanoscale Self assembly Processes written by Prabu Ravindran and published by . This book was released on 2007 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Calibration Standards and Methods written by Günter Wilkening and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quantitative determination of the properties of micro- and nanostructures is essential in research and development. It is also a prerequisite in process control and quality assurance in industry. The knowledge of the geometrical dimensions of structures in most cases is the base, to which other physical and chemical properties are linked. Quantitative measurements require reliable and stable instruments, suitable measurement procedures as well as appropriate calibration artefacts and methods. The seminar "NanoScale 2004" (6th Seminar on Quantitative Microscopy and 2nd Seminar on Nanoscale Calibration Standards and Methods) at the National Metrology Institute (Physikalisch-Technische Bundesanstalt PTB), Braunschweig, Germany, continues the series of seminars on Quantitative Microscopy. The series stimulates the exchange of information between manufacturers of relevant hard- and software and the users in science and industry. Topics addressed in these proceedings are a) the application of quantitative measurements and measurement problems in: microelectronics, microsystems technology, nano/quantum/molecular electronics, chemistry, biology, medicine, environmental technology, materials science, surface processing b) calibration & correction methods: calibration methods, calibration standards, calibration procedures, traceable measurements, standardization, uncertainty of measurements c) instrumentation and methods: novel/improved instruments and methods, reproducible probe/sample positioning, position-measuring systems, novel/improved probe/detector systems, linearization methods, image processing
Download or read book Image Based Metrology for Quantitative Analysis of Local Structural Similrity of Nanostructures written by Raveendran Paramesran and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Applications for Information and Energy Systems written by Anatoli Korkin and published by Springer Science & Business Media. This book was released on 2012-10-28 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Applications for Information and Energy Systems presents nanotechnology fundamentals and applications in the key research areas of information technology (electronics and photonics) and alternative (solar) energy: plasmonics, photovoltaics, transparent conducting electrodes, silicon electroplating, and resistive switching. The three major technology areas – electronics, photonics, and solar energy – are linked on the basis of similar applications of nanostructured materials in research and development. By bridging the materials physics and chemistry at the atomic scale with device and system design, integration, and performance requirements, tutorial chapters from worldwide leaders in the field provide a coherent picture of theoretical and experimental research efforts and technology development in these highly interdisciplinary areas.
Download or read book Center for Nanoscale Science and Technology 2010 Biennial Report written by and published by DIANE Publishing. This book was released on with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Additive Manufacturing of Metallic Materials and Components written by Dongdong Gu and published by Elsevier. This book was released on 2022-12-07 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing of Metallic Materials and Components discusses the current state and future development of laser additive manufacturing technologies, detailing material, structure, process and performance. The book explores the fundamental scientific theories and technical principles behind the elements of laser additive manufacturing, touching upon scientific and technological challenges faced by laser additive manufacturing technology. This book is suitable for those who want to further “understand and “master laser additive manufacturing technology and will expose readers to innovative industrial applications that meet significant demand from aeronautical and astronautical high-end modern industries for low-cost, short-cycle and net-shape manufacturing of structure-function integrated metallic components. With the increasing use of industrial applications, additive manufacturing processes are deepening, with technology continuing to evolve. As new scientific and technological challenges emerge, there is a need for an interdisciplinary and comprehensive discussion of material preparation and forming, structure design and optimization, laser process and its control, microstructure and performance characterization, and innovative industrial applications, hence this book covers these important aspects. Highlights an integration of material, structure, process and performance for laser additive manufacturing of metallic components to reflect the interdisciplinary nature of this technology Covers cross-scale structure and performance coordination mechanisms, including micro-scale material microstructure control, meso-scale interaction between laser beam and particle matter, and macro-scale precise forming of components and performance control Explores fundamental scientific theories and technical principles behind laser additive manufacturing processes Provides innovation elements and strategies for the future sustainable development of additive manufacturing technologies in terms of multi-materials design, novel bio-inspired structure design, tailored printing process with meso-scale monitoring, and high-performance and functionality of printed components
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Ellipsometry at the Nanoscale written by Maria Losurdo and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and introduces ellipsometry in nanoscience and nanotechnology making a bridge between the classical and nanoscale optical behaviour of materials. It delineates the role of the non-destructive and non-invasive optical diagnostics of ellipsometry in improving science and technology of nanomaterials and related processes by illustrating its exploitation, ranging from fundamental studies of the physics and chemistry of nanostructures to the ultimate goal of turnkey manufacturing control. This book is written for a broad readership: materials scientists, researchers, engineers, as well as students and nanotechnology operators who want to deepen their knowledge about both basics and applications of ellipsometry to nanoscale phenomena. It starts as a general introduction for people curious to enter the fields of ellipsometry and polarimetry applied to nanomaterials and progresses to articles by experts on specific fields that span from plasmonics, optics, to semiconductors and flexible electronics. The core belief reflected in this book is that ellipsometry applied at the nanoscale offers new ways of addressing many current needs. The book also explores forward-looking potential applications.
Download or read book Metal Clusters and Nanoalloys written by Marcelo Mario Mariscal and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic nanoparticles hold promise for their potential applications in a wide array of disciplines ranging from materials science to medicine. This book brings the power of theoretical methods to an audience of experimentalists, and explicates the simulation of metallic clusters and nanoparticles. It begins with a summary of the current state of research on metallic nanoparticles, then moves on to the current state of the art in theory of metallic nanoparticldes, and then explains why and how these tools help experimentalists. Contributions are provided by renowned experts in the field from across the world.
Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book Ultrasonic and Electromagnetic NDE for Structure and Material Characterization written by Tribikram Kundu and published by CRC Press. This book was released on 2016-04-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on nondestructive evaluation (NDE) focus either on the theoretical background or on advanced applications. Bridging the gap between the two, Ultrasonic and Electromagnetic NDE for Structure and Material Characterization: Engineering and Biomedical Applications brings together the principles, equations, and applications of ultrasonic and
Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Download or read book Nanoscale Characterisation of Ferroelectric Materials written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the field of nanoscale characterization of ferroelectric materials using scanning probe microscopy (SPM). It addresses various imaging mechanisms of ferroelectric domains in SPM, quantitative analysis of the piezoresponse signals as well as basic physics of ferroelectrics at the nanoscale level, such as nanoscale switching, scaling effects, and transport behavior. This state-of-the-art review of theory and experiments on nanoscale polarization phenomena will be a useful reference for advanced readers as well for newcomers and graduate students interested in the SPM techniques. The non-specialists will obtain valuable information about different approaches to electrical characterization by SPM, while researchers in the ferroelectric field will be provided with details of SPM-based measurements of ferroelectrics.
Download or read book Handbook of Biomass written by Sabu Thomas and published by Springer Nature. This book was released on with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shape Memory Polymers written by Hemjyoti Kalita and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-03-19 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic principles and mechanism of shape memory polymers, classification of shape memory polymers, and related characterization techniques are illustrated. Furthermore, an overview of the broad spectrum of applications in various fields for shape memory polymer is presented. Special focus will be given to hyperbranched, blended, interpenetrating and bio-based shape memory polymers, as well as shape memory polymer nanocomposites.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 1968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 2004 and with the 2nd edition in 2006, the Springer Handbook of Nanotechnology has established itself as the definitive reference in the nanoscience and nanotechnology area. It integrates the knowledge from nanofabrication, nanodevices, nanomechanics, Nanotribology, materials science, and reliability engineering in just one volume. Beside the presentation of nanostructures, micro/nanofabrication, and micro/nanodevices, special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. In its 3rd edition, the book grew from 8 to 9 parts now including a part with chapters on biomimetics. More information is added to such fields as bionanotechnology, nanorobotics, and (bio)MEMS/NEMS, bio/nanotribology and bio/nanomechanics. The book is organized by an experienced editor with a universal knowledge and written by an international team of over 150 distinguished experts. It addresses mechanical and electrical engineers, materials scientists, physicists and chemists who work either in the nano area or in a field that is or will be influenced by this new key technology.
