Download or read book III V Compound Semiconductors and Devices written by Keh Yung Cheng and published by Springer Nature. This book was released on 2020-11-08 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a complete and fundamental introduction to the properties of III-V compound semiconductor devices, highlighting the theoretical and practical aspects of their device physics. Beginning with an introduction to the basics of semiconductor physics, it presents an overview of the physics and preparation of compound semiconductor materials, as well as a detailed look at the electrical and optical properties of compound semiconductor heterostructures. The book concludes with chapters dedicated to a number of heterostructure electronic and photonic devices, including the high-electron-mobility transistor, the heterojunction bipolar transistor, lasers, unipolar photonic devices, and integrated optoelectronic devices. Featuring chapter-end problems, suggested references for further reading, as well as clear, didactic schematics accompanied by six information-rich appendices, this textbook is ideal for graduate students in the areas of semiconductor physics or electrical engineering. In addition, up-to-date results from published research make this textbook especially well-suited as a self-study and reference guide for engineers and researchers in related industries.
Download or read book Physical Properties of III V Semiconductor Compounds written by Sadao Adachi and published by John Wiley & Sons. This book was released on 1992-11-10 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is two-fold: to examine key properties of III-V compounds and to present diverse material parameters and constants of these semiconductors for a variety of basic research and device applications. Emphasis is placed on material properties not only of Inp but also of InAs, GaAs and GaP binaries.
Download or read book Doping in III V Semiconductors written by E. Fred Schubert and published by E. Fred Schubert. This book was released on 2015-08-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to describe thoroughly the many facets of doping in compound semiconductors. Equal emphasis is given to the fundamental materials physics and to the technological aspects of doping. The author describes various doping techniques, including doping during epitaxial growth, doping by implantation, and doping by diffusion. The key characteristics of all dopants that have been employed in III-V semiconductors are discussed. In addition, general characteristics of dopants are analyzed, including the electrical activity, saturation, amphotericity, autocompensation, and maximum attainable dopant concentration. Redistribution effects are important in semiconductor microstructures. Linear and non-linear diffusion, different microscopic diffusion mechanisms, surface segregation, surface drift, surface migration, impurity-induced disordering, and the respective physical driving mechanisms are illustrated. Topics related to basic impurity theory include the hydrogenic model for shallow impurities, linear screening, density of states, classical and quantum statistics, the law of mass action, as well as many analytic approximations for the Fermi-Dirac integral for three-, two- and one dimensional systems. The timely topic of highly doped semiconductors, including band tails, impurity bands, bandgap renormalization, the Mott transition, and the Burstein-Moss shift, is discussed as well. Doping is essential in many semiconductor heterostructures including high-mobility selectively doped heterostructures, quantum well and quantum barrier structures, doping superlattice structures and d-doping structures. Technologically important deep levels are summarized, including Fe, Cr, and the DX-center, the EL2 defect, and rare-earth impurities. The properties of deep levels are presented phenomenologically, including emission, capture, Shockley-Read recombination, the Poole-Frenkel effect, lattice relaxation, and other effects. The final chapter is dedicated to the experimental characterization of impurities. This book will be of interest to graduate students, researchers and development engineers in the fields of electrical engineering, materials science, physics, and chemistry working on semiconductors. The book may also be used as a text for graduate courses in electrical engineering and materials science.
Download or read book Fundamentals of III V Semiconductor MOSFETs written by Serge Oktyabrsky and published by Springer Science & Business Media. This book was released on 2010-03-16 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of III-V Semiconductor MOSFETs presents the fundamentals and current status of research of compound semiconductor metal-oxide-semiconductor field-effect transistors (MOSFETs) that are envisioned as a future replacement of silicon in digital circuits. The material covered begins with a review of specific properties of III-V semiconductors and available technologies making them attractive to MOSFET technology, such as band-engineered heterostructures, effect of strain, nanoscale control during epitaxial growth. Due to the lack of thermodynamically stable native oxides on III-V's (such as SiO2 on Si), high-k oxides are the natural choice of dielectrics for III-V MOSFETs. The key challenge of the III-V MOSFET technology is a high-quality, thermodynamically stable gate dielectric that passivates the interface states, similar to SiO2 on Si. Several chapters give a detailed description of materials science and electronic behavior of various dielectrics and related interfaces, as well as physics of fabricated devices and MOSFET fabrication technologies. Topics also include recent progress and understanding of various materials systems; specific issues for electrical measurement of gate stacks and FETs with low and wide bandgap channels and high interface trap density; possible paths of integration of different semiconductor materials on Si platform.
Download or read book Properties of Aluminium Gallium Arsenide written by Sadao Adachi and published by IET. This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The alloy system A1GaAs/GaAs is potentially of great importance for many high-speed electronics and optoelectronic devices, because the lattice parameter difference GaAs and A1GaAs is very small, which promises an insignificant concentration of undesirable interface states. Thanks to this prominent feature, a number of interesting properties and phenomena, such as high-mobility low-dimensional carrier gases, resonant tunnelling and fractional quantum Hall effect, have been found in the A1GaAs/GaAs heterostructure system. New devices, such as modulation-doped FETs, heterojunction bipolar transistors, resonant tunnelling transistors, quantum-well lasers, and other photonic and quantum-effect devices, have also been developed recently using this material system. These areas are recognized as not being the most interesting and active fields in semiconductor physics and device engineering.
Download or read book Ternary Alloys Based on III V Semiconductors written by Vasyl Tomashyk and published by CRC Press. This book was released on 2017-09-29 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have attracted considerable attention due to their applications in the fabrication of electronic and optoelectronic devices as light-emitting diodes and solar cells. Because of their wide applications in a variety of devices, the search for new semiconductor materials and the improvement of existing materials is an important field of study. This new book covers all known information about phase relations in ternary systems based on III-V semiconductors. This book will be of interest to undergraduate and graduate students studying materials science, solid state chemistry, and engineering. It will also be relevant for researchers at industrial and national laboratories, in addition to phase diagram researchers, inorganic chemists, and solid state physicists.
Download or read book Physics and Chemistry of III V Compound Semiconductor Interfaces written by Carl Wilmsen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of the 111-V compound semiconductors to device fabrica tion has grown considerably in the last few years. This process has been stimulated, in part, by the advancement in the understanding of the interface physics and chemistry of the III-V's. The literature on this subject is spread over the last 15 years and appears in many journals and conference proceedings. Understanding this literature requires consider able effort by the seasoned researcher, and even more for those starting out in the field or by engineers and scientists who wish to apply this knowledge to the fabrication of devices. The purpose of this book is to bring together much of the fundamental and practical knowledge on the physics and chemistry of the 111-V compounds with metals and dielectrics. The authors of this book have endeavored to provide concise overviews of these areas with many tahles ancI grarhs whic. h c. omr>are and summarize the literature. In this way, the book serves as both an insightful treatise on III-V interfaces and a handy reference to the literature. The selection of authors was mandated by the desire to include both fundamental and practical approaches, covering device and material aspects of the interfaces. All of the authors are recognized experts on III-V interfaces and each has worked for many years in his subject area. This experience is projected in the breadth of understanding in each chapter.
Download or read book Atomic Diffusion in III V Semiconductors written by Brian Tuck and published by CRC Press. This book was released on 2021-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors, of which gallium arsenide is the best known, have been important for some years and appear set to become much more so in the future. They have principally contributed to two technologies: microwave devices and optoelectronics. Recent advances in the production of thin layers have made possible a whole new range of devices based on multi-quantum wells. The heat treatments used in the manufacture of semiconductor devices means that some diffusion must take place. A good understanding of diffusion processes is therefore essential to maintain control over the technology. Atomic Diffusion in III-V Semiconductors presents a lucid account of the experimental work that has been carried out on diffusion in III-Vs and explores the advanced models that explain the results. A review of the III-V group of semiconductors outlines the special properties that make them so attractive for some types of devices. Discussion of the basic elements of diffusion in semiconductors provides the theory necessary to understand the subject in depth, and the book gives hints on how to assess the published data. Chapters on diffusion of shallow donors, shallow acceptors, transition elements, and very fast-diffusing elements provide a critical review of published works. The book also presents the neglected subject of self-diffusion, including a section on superlattices. Atomic Diffusion in III-V Semiconductors will be of interest to research workers in semiconductor science and technology, and to postgraduate students in physics, electronics, and materials science.
Download or read book III V Compound Semiconductors written by Tingkai Li and published by CRC Press. This book was released on 2016-04-19 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-based microelectronics has steadily improved in various performance-to-cost metrics. But after decades of processor scaling, fundamental limitations and considerable new challenges have emerged. The integration of compound semiconductors is the leading candidate to address many of these issues and to continue the relentless pursuit of more
Download or read book Dilute III V Nitride Semiconductors and Material Systems written by Ayse Erol and published by Springer Science & Business Media. This book was released on 2008-01-12 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current status of research and development in dilute III-V nitrides. It covers major developments in this new class of materials within 24 chapters from prominent research groups. The book integrates materials science and applications in optics and electronics in a unique way. It is valuable both as a reference work for researchers and as a study text for graduate students.
Download or read book III V Integrated Circuit Fabrication Technology written by Shiban Tiku and published by CRC Press. This book was released on 2016-04-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaAs processing has reached a mature stage. New semiconductor compounds are emerging that will dominate future materials and device research, although the processing techniques used for GaAs will still remain relevant. This book covers all aspects of the current state of the art of III-V processing, with emphasis on HBTs. It is aimed at practicing
Download or read book Delta doping of Semiconductors written by E. F. Schubert and published by Cambridge University Press. This book was released on 1996-03-14 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to give a comprehensive review of the theory, fabrication, characterisation, and device applications of abrupt, shallow, and narrow doping profiles in semiconductors. Such doping profiles are a key element in the development of modern semiconductor technology. After an introductory chapter setting out the basic theoretical and experimental concepts involved, the fabrication of abrupt and narrow doping profiles by several different techniques, including epitaxial growth, is discussed. The techniques for characterising doping distributions are then presented, followed by several chapters devoted to the inherent physical properties of narrow doping profiles. The latter part of the book deals with specific devices. The book will be of great interest to graduate students, researchers and engineers in the fields of semiconductor physics and microelectronic engineering.
Download or read book Devices for Integrated Circuits written by H. Craig Casey and published by John Wiley & Sons. This book was released on 1998-12-14 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the device physics of the Si and III-V compound semiconductor devices used in integrated circuits. Important equations are derived from basic physical concepts. The physics of these devices are related to the parameters used in SPICE. Terminology is intended to prepare students for reading technical journals on semiconductor devices. This text is suitable for first-year graduate students and seniors in Electrical Engineering; graduate students in Material Science and Chemical Engineering, interested in semiconductor materials; Computer Science students interested in custom VLSI design; and professionals in the semiconductor industry.
Download or read book Topics in Growth and Device Processing of III V Semiconductors written by S. J. Pearton and published by World Scientific. This book was released on 1996 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advanced epitaxial growth and self-aligned processing techniques for the fabrication of III-V semiconductor devices such as heterojunction bipolar transistors and high electron mobility transistors. It is the first book to describe the use of carbon-doping and low damage dry etching techniques that have proved indispensable in making reliable, high performance devices. These devices are used in many applications such as cordless telephones and high speed lightwave communication systems.
Download or read book III V Nitride Semiconductors written by Edward T. Yu and published by CRC Press. This book was released on 2022-10-30 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concepts in this book will provide a comprehensive overview of the current state for a broad range of nitride semiconductor devices, as well as a detailed introduction to selected materials and processing issues of general relevance for these applications. This compilation is very timely given the level of interest and the current stage of research in nitride semiconductor materials and device applications. This volume consists of chapters written by a number of leading researchers in nitride materials and device technology addressing Ohmic and Schottky contacts, AIGalnN multiple quantum well laser diodes, nitride vertical cavity emitting lasers, and ultraviolet photodetectors. This unique volume provides a comprehensive review and introduction to application and devices based on GaN and related compounds for newcomers to the field and stimulus to further advances for experienced researchers.
Download or read book III Nitride Semiconductors and Their Modern Devices written by Bernard Gil and published by Semiconductor Science and Tech. This book was released on 2013-08-22 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: All recent developments of nitrides and of their technology are gathered here in a single book, with chapters written by world leaders in the field.
Download or read book Properties of Semiconductor Alloys written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide a comprehensive treatment of the materials aspects of group-IV, III−V and II−VI semiconductor alloys used in various electronic and optoelectronic devices. The topics covered in this book include the structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport properties of such semiconductor alloys. The book reviews not only commonly known alloys (SiGe, AlGaAs, GaInPAs, and ZnCdTe) but also new alloys, such as dilute-carbon alloys (CSiGe, CSiSn, etc.), III−N alloys, dilute-nitride alloys (GaNAs and GaInNAs) and Mg- or Be-based II−VI semiconductor alloys. Finally there is an extensive bibliography included for those who wish to find additional information as well as tabulated values and graphical information on the properties of semiconductor alloys.