Download or read book II VI Compounds written by Brian Ray and published by Elsevier. This book was released on 2013-10-22 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: II-VI Compounds covers the general idea of the way in which II-VI compounds behave. The book describes the fundamental nature of II-VI compounds; the preparation and single crystal growth; and the fundamental optical properties of II-VI compounds. The text also discusses the luminescence; the photo conductivity and associated behavior; the transport properties; and the applications of II-VI compounds. Students taking materials science or engineering courses will find the book useful.
Download or read book II VI Semiconductor Materials and their Applications written by MariaC. Tamargo and published by Routledge. This book was released on 2018-05-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: II-VI Semiconductor Materials and Their Applications deals with II-VI compound semiconductors and the status of the two areas of current optoelectronics applications: blue-green emitters and IR detectors. Specifically, the growth, charactrtization, materials and device issues for these two applications are described. Emphasis is placed on the wide bandgap emitters where much progress has occurred recently.The book also presents new directions that have potential, future applications in optoelectronics for II-VI materials. In particular, it discusses the status of dilute magnetic semiconductors for mango-optical and electromagnetic devices, nonlinear optical properties, photorefractive effects and new materials and physics phenomena, such as self-organized, low-dimensional structures.II_VI Semiconductor Materials and Their Applications is a valuable reference book for researchers in the field as well as a textbook for materials science and applied physics courses.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1973 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Aluminium Gallium Arsenide written by Sadao Adachi and published by IET. This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The alloy system A1GaAs/GaAs is potentially of great importance for many high-speed electronics and optoelectronic devices, because the lattice parameter difference GaAs and A1GaAs is very small, which promises an insignificant concentration of undesirable interface states. Thanks to this prominent feature, a number of interesting properties and phenomena, such as high-mobility low-dimensional carrier gases, resonant tunnelling and fractional quantum Hall effect, have been found in the A1GaAs/GaAs heterostructure system. New devices, such as modulation-doped FETs, heterojunction bipolar transistors, resonant tunnelling transistors, quantum-well lasers, and other photonic and quantum-effect devices, have also been developed recently using this material system. These areas are recognized as not being the most interesting and active fields in semiconductor physics and device engineering.
Download or read book II VI and I VII Compounds Semimagnetic Compounds written by U. Rössler and published by Springer. This book was released on 1999-07-23 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. III/17a-i and III/22a, b (supplement) on semiconductor physics and technology have been published earlier, the latter covering new data on the technologically important group IV elements and III-V, II-VI and I-VII compounds only. The wealth of further data from the last decade is now being critically evaluated by over 30 well-known experts in the field of semiconductors. To meet the demands of todays scientists and to offer a complete overview on semiconductor data all data available so far are published in the following way: a series of five subvolumes covers only the supplementary data to volumes III/17 and 22. Enclosed to each subvolume, a CD-ROM contains a complete, revised and update edition of all relevant data. For each individual substance the information is presented in userfriendly documents, containing data, figures and references. Easy access to the documents is provided via substance and property keywords, listings and full text retrieval.
Download or read book II VI Semiconductor Compounds written by Mukesh Kumar Jain and published by World Scientific Publishing Company Incorporated. This book was released on 1993 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each of the 23 chapters of this book is a contribution in the form of a report, a review article or a full length research paper. The first few contributions present a description of the fundamental aspects of these alloys. The next few contributions are followed by a treatment of superlattices. The later contributions describe the more important devices which can be produced using these semiconductors. The book concludes with an examination of the properties of these alloys when they are in the form of thin films
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book II VI Semiconductor Materials and their Applications written by MariaC. Tamargo and published by Routledge. This book was released on 2018-05-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: II-VI Semiconductor Materials and Their Applications deals with II-VI compound semiconductors and the status of the two areas of current optoelectronics applications: blue-green emitters and IR detectors. Specifically, the growth, charactrtization, materials and device issues for these two applications are described. Emphasis is placed on the wide bandgap emitters where much progress has occurred recently.The book also presents new directions that have potential, future applications in optoelectronics for II-VI materials. In particular, it discusses the status of dilute magnetic semiconductors for mango-optical and electromagnetic devices, nonlinear optical properties, photorefractive effects and new materials and physics phenomena, such as self-organized, low-dimensional structures.II_VI Semiconductor Materials and Their Applications is a valuable reference book for researchers in the field as well as a textbook for materials science and applied physics courses.
Download or read book Vapor Crystal Growth and Characterization written by Ching-Hua Su and published by Springer Nature. This book was released on 2020-01-14 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes developments in the crystal growth of bulk II-VI semiconductor materials. A fundamental, systematic, and in-depth study of the physical vapor transport (PVT) growth process is the key to producing high-quality single crystals of semiconductors. As such, the book offers a comprehensive overview of the extensive studies on ZnSe and related II-VI wide bandgap compound semiconductors, such as CdS, CdTe, ZnTe, ZnSeTe and ZnSeS. Further, it shows the detailed steps for the growth of bulk crystals enabling optical devices which can operate in the visible spectrum for applications such as blue light emitting diodes, lasers for optical displays and in the mid-IR wavelength range, high density recording, and military communications. The book then discusses the advantages of crystallization from vapor compared to the conventional melt growth: lower processing temperatures, the purification process associated with PVT, and the improved surface morphology of the grown crystals, as well as the necessary drawbacks to the PVT process, such as the low and inconsistent growth rates and the low yield of single crystals. By presenting in-situ measurements of transport rate, partial pressures and interferometry, as well as visual observations, the book provides detailed insights into in the kinetics during the PVT process. This book is intended for graduate students and professionals in materials science as well as engineers preparing and developing optical devices with semiconductors.
Download or read book Ii vi Semiconductor Compounds written by Mukesh Jain and published by World Scientific. This book was released on 1993-05-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: X-Ray Characterisation of II-VI Semiconductor Materials (D Gao et al.)Electronic Structure of II-VI Semiconductors and Their Alloys (S-H Wei)Radiative Recombination Processes in Rare Earth Doped II-VI Materials (M Godlewski et al.)Nonlinear Optical Properties of Heavily Doped CdS (U Neukirch)Nanostructures of Broad Gap (II,Mn) VI Semiconductors (W Heimbrodt & O Goede)Co-Based II-VI Semimagnetic Semiconductors (A Twardowski et al.)Photoluminescence and Raman Scattering of ZnSe-ZnTe Strained Layer Superlattices (K Kumazaki)Novel Electronic Processes in Mercury-Based Superlattices (J R Meyer et al.)Strain, Pressure and Piezoelectric Effects in Strained II-VI Superlattices and Heterostructures (E Anastassakia)Electronic Structures of Strained II-VI Superlattices (T Nakayama)Devices and Applications of II-VI Compounds (S Colak)Solar Cells Based on II-VI Semiconductors (H Uda)ZnSe and Its Applications for Blue-Light Laser Diodes (M Pessa & D Ahn)Molecular Beam Epitaxy of HgCdTe for Electro-Optical Infrared Applications (J M A Cortés)and other papers Readership: Condensed matter physicists and electronic engineers. keywords:
Download or read book Compound Semiconductors 2001 written by Y Arakawa and published by CRC Press. This book was released on 2002-09-30 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international perspective on recent research, Compound Semiconductors 2001 provides an overview of important developments in III-V compound semiconductors, such as GaAs, InP, and GaN; II-VI compounds, such as ZnSe and CdTe; and IV-IV compounds, such as SiC and SiGe. The book contains 139 papers arranged in chapters on electronic devices, optical devices, magnetic materials, novel systems, quantum transport, optical characterization, quantum nanostructures, and material growth and characterization. The content encompasses the development of optical and electronic devices based on nitride semiconductors as well as the steady advances in traditional topics like III-V-based electronic and optical devices, growth and processing, and characterization. The book also includes novel research trends in quantum structures, such as quantum wires and dots, and spintronics, which are very promising for future developments in nanotechnology. As the primary forum for research into these materials and their device applications, this resource is an essential reference for researchers working on compound semiconductors in semiconductor physics, device physics, materials science, chemistry, and electronic and electrical engineering.
Download or read book III V Compound Semiconductors and Devices written by Keh Yung Cheng and published by Springer Nature. This book was released on 2020-11-08 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a complete and fundamental introduction to the properties of III-V compound semiconductor devices, highlighting the theoretical and practical aspects of their device physics. Beginning with an introduction to the basics of semiconductor physics, it presents an overview of the physics and preparation of compound semiconductor materials, as well as a detailed look at the electrical and optical properties of compound semiconductor heterostructures. The book concludes with chapters dedicated to a number of heterostructure electronic and photonic devices, including the high-electron-mobility transistor, the heterojunction bipolar transistor, lasers, unipolar photonic devices, and integrated optoelectronic devices. Featuring chapter-end problems, suggested references for further reading, as well as clear, didactic schematics accompanied by six information-rich appendices, this textbook is ideal for graduate students in the areas of semiconductor physics or electrical engineering. In addition, up-to-date results from published research make this textbook especially well-suited as a self-study and reference guide for engineers and researchers in related industries.
Download or read book Properties of Semiconductor Alloys written by Sadao Adachi and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide a comprehensive treatment of the materials aspects of group-IV, III−V and II−VI semiconductor alloys used in various electronic and optoelectronic devices. The topics covered in this book include the structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport properties of such semiconductor alloys. The book reviews not only commonly known alloys (SiGe, AlGaAs, GaInPAs, and ZnCdTe) but also new alloys, such as dilute-carbon alloys (CSiGe, CSiSn, etc.), III−N alloys, dilute-nitride alloys (GaNAs and GaInNAs) and Mg- or Be-based II−VI semiconductor alloys. Finally there is an extensive bibliography included for those who wish to find additional information as well as tabulated values and graphical information on the properties of semiconductor alloys.
Download or read book Semiconducting II VI IV VI and V VI Compounds written by N.Kh. Abrikosov and published by Springer. This book was released on 2013-12-01 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductors written by Martin I. Pech-Canul and published by Springer. This book was released on 2019-01-17 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to optical, optoelectronic, and semiconductor materials and provides an overview of the topic from its fundamentals to cutting-edge processing routes to groundbreaking technologies for the most recent applications. The book details the characterization and properties of these materials. Chemical methods of synthesis are emphasized by the authors throughout the publication. Describes new materials and updates to older materials that exhibit optical, optoelectronic and semiconductor behaviors; Covers the structural and mechanical aspects of the optical, optoelectronic and semiconductor materials for meeting mechanical property and safety requirements; Includes discussion of the environmental and sustainability issues regarding optical, optoelectronic, and semiconductor materials, from processing to recycling.
Download or read book Handbook of Hydrothermal Technology written by K. Byrappa and published by William Andrew. This book was released on 2012-12-31 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more -- all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one exceptionally useful, long-needed volume.The handbook provides a single source for understanding how aqueous solvents or mineralizers work under temperature and pressure to dissolve and recrystallize normally insoluble materials, and decompose or recycle any waste material. The result, as the authors show in the book, is technologically the most efficient method in crystal growth, materials processing, and waste treatment. The book gives scientists and technologists an overview of the entire subject including: À Evolution of the technology from geology to widespread industrial use. À Descriptions of equipment used in the process and how it works.À Problems involved with the growth of crystals, processing of technological materials, environmental and safety issues.À Analysis of the direction of today's technology. In addition, readers get a close look at the hydrothermal synthesis of zeolites, fluorides, sulfides, tungstates, and molybdates, as well as native elements and simple oxides. Delving into the commercial production of various types, the authors clarify the effects of temperature, pressure, solvents, and various other chemical components on the hydrothermal processes. Gives an overview of the evolution of Hydrothermal Technology from geology to widespread industrial use Describes the equipment used in the process and how it works Discusses problems involved with the growth of crystals, processing of technological materials, and environmental and safety issues
Download or read book Physical Properties of III V Semiconductor Compounds written by Sadao Adachi and published by John Wiley & Sons. This book was released on 1992-11-10 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is two-fold: to examine key properties of III-V compounds and to present diverse material parameters and constants of these semiconductors for a variety of basic research and device applications. Emphasis is placed on material properties not only of Inp but also of InAs, GaAs and GaP binaries.
