Download or read book Power Systems written by Leonard L. Grigsby and published by CRC Press. This book was released on 2017-12-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Systems, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) covers all aspects of power system protection, dynamics, stability, operation, and control. Under the editorial guidance of L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Andrew Hanson, Pritindra Chowdhuri, Gerry Sheblé, and Mark Nelms, this carefully crafted reference includes substantial new and revised contributions from worldwide leaders in the field. This content provides convenient access to overviews and detailed information on a diverse array of topics. Concepts covered include: Power system analysis and simulation Power system transients Power system planning (reliability) Power electronics Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. New sections present developments in small-signal stability and power system oscillations, as well as power system stability controls and dynamic modeling of power systems. With five new and 10 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New chapters cover: Symmetrical Components for Power System Analysis Transient Recovery Voltage Engineering Principles of Electricity Pricing Business Essentials Power Electronics for Renewable Energy A volume in the Electric Power Engineering Handbook, Third Edition Other volumes in the set: K12642 Ele

Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)

Download or read book Power System Analysis written by J.C. Das and published by CRC Press. This book was released on 2017-12-19 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental to the planning, design, and operating stages of any electrical engineering endeavor, power system analysis continues to be shaped by dramatic advances and improvements that reflect today’s changing energy needs. Highlighting the latest directions in the field, Power System Analysis: Short-Circuit Load Flow and Harmonics, Second Edition includes investigations into arc flash hazard analysis and its migration in electrical systems, as well as wind power generation and its integration into utility systems. Designed to illustrate the practical application of power system analysis to real-world problems, this book provides detailed descriptions and models of major electrical equipment, such as transformers, generators, motors, transmission lines, and power cables. With 22 chapters and 7 appendices that feature new figures and mathematical equations, coverage includes: Short-circuit analyses, symmetrical components, unsymmetrical faults, and matrix methods Rating structures of breakers Current interruption in AC circuits, and short-circuiting of rotating machines Calculations according to the new IEC and ANSI/IEEE standards and methodologies Load flow, transmission lines and cables, and reactive power flow and control Techniques of optimization, FACT controllers, three-phase load flow, and optimal power flow A step-by-step guide to harmonic generation and related analyses, effects, limits, and mitigation, as well as new converter topologies and practical harmonic passive filter designs—with examples More than 2000 equations and figures, as well as solved examples, cases studies, problems, and references Maintaining the structure, organization, and simplified language of the first edition, longtime power system engineer J.C. Das seamlessly melds coverage of theory and practical applications to explore the most commonly required short-circuit, load-flow, and harmonic analyses. This book requires only a beginning knowledge of the per-unit system, electrical circuits and machinery, and matrices, and it offers significant updates and additional information, enhancing technical content and presentation of subject matter. As an instructional tool for computer simulation, it uses numerous examples and problems to present new insights while making readers comfortable with procedure and methodology.

Download or read book Short Circuits in AC and DC Systems written by J. C. Das and published by CRC Press. This book was released on 2017-10-24 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an understanding of the nature of short-circuit currents, current interruption theories, circuit breaker types, calculations according to ANSI/IEEE and IEC standards, theoretical and practical basis of short-circuit current sources, and the rating structure of switching devices. The book aims to explain the nature of short-circuit currents, the symmetrical components for unsymmetrical faults, and matrix methods of solutions, which are invariably used on digital computers. It includes innovations, worked examples, case studies, and solved problems.

Download or read book Power System Harmonics and Passive Filter Designs written by J. C. Das and published by John Wiley & Sons. This book was released on 2015-03-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: As new technologies are created and advances are made with the ongoing research efforts, power system harmonics has become a subject of great interest. The author presents these nuances with real-life case studies, comprehensive models of power system components for harmonics, and EMTP simulations. Comprehensive coverage of power system harmonics Presents new harmonic mitigation technologies In-depth analysis of the effects of harmonics Foreword written by Dr. Jean Mahseredijan, world renowned authority on simulations of electromagnetic transients and harmonics

Download or read book IEEE Standard for Rating Structure for AC High voltage Circuit Breakers written by and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This corrigendum corrects technical and other non-editorial errors made during the preparation of IEEE Std C37.04-1999 latest version, third printing 29 November 2005, which covers the rating structure for high-voltage circuit breakers rated over 1000 VAC. This corrigendum includes the corrections made in the errata, as the errata will be removed once this corrigendum is approved. As of the printing of this corrigendum, IEEE Std. C37.04-1999 includes the following: IEEE Std C37.04-1999 latest version, third printing 29 November 2005; IEEE Std C37.04a-2003, Amendment 1: Capacitance Current Switching; IEEE Std C37.04b, Amendment 2: Amendment to Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100; and this corrigendum, IEEE Std C37.04-1999/Cor 1-2009, which makes technical corrections to the original IEEE Std. C37.04-1999 and includes the corrections published in an errata. Keywords: circuit breaker.

Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.

Download or read book IEEE Recommended Practice for Calculating Short Circuit Currents in Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2006-01-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipment that senses, carries, or interrupts short-circuit currents.

Download or read book Handbook of Electrical Engineering written by Alan L. Sheldrake and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical treatment of power system design within the oil, gas, petrochemical and offshore industries. These have significantly different characteristics to large-scale power generation and long distance public utility industries. Developed from a series of lectures on electrical power systems given to oil company staff and university students, Sheldrake's work provides a careful balance between sufficient mathematical theory and comprehensive practical application knowledge. Features of the text include: Comprehensive handbook detailing the application of electrical engineering to the oil, gas and petrochemical industries Practical guidance to the electrical systems equipment used on off-shore production platforms, drilling rigs, pipelines, refineries and chemical plants Summaries of the necessary theories behind the design together with practical guidance on selecting the correct electrical equipment and systems required Presents numerous 'rule of thumb' examples enabling quick and accurate estimates to be made Provides worked examples to demonstrate the topic with practical parameters and data Each chapter contains initial revision and reference sections prior to concentrating on the practical aspects of power engineering including the use of computer modelling Offers numerous references to other texts, published papers and international standards for guidance and as sources of further reading material Presents over 35 years of experience in one self-contained reference Comprehensive appendices include lists of abbreviations in common use, relevant international standards and conversion factors for units of measure An essential reference for electrical engineering designers, operations and maintenance engineers and technicians.

Download or read book Transients in Electrical Systems Analysis Recognition and Mitigation written by J. C. Das and published by McGraw Hill Professional. This book was released on 2010-05-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detect and Mitigate Transients in Electrical Systems This practical guide explains how to identify the origin of disturbances in electrical systems and analyze them for effective mitigation and control. Transients in Electrical Systems considers all transient frequencies, ranging from 0.1 Hz to 50 MHz, and discusses transmission line and cable modeling as well as frequency dependent behavior. Results of EMTP simulations, solved examples, and detailed equations are included in this comprehensive resource. Transients in Electrical Systems covers: Transients in lumped circuits Control systems Lightning strokes, shielding, and backflashovers Transients of shunt capacitor banks Switching transients and temporary overvoltages Current interruption in AC circuits Symmetrical and unsymmetrical short-circuit currents Transient behavior of synchronous generators, induction and synchronous motors, and transformers Power electronic equipment Flicker, bus, transfer, and torsional vibrations Insulation coordination Gas insulated substations Transients in low-voltage and grounding systems Surge arresters DC systems, short-circuits, distributions, and HVDC Smart grids and wind power generation

Download or read book Controversies in Media Ethics written by A. David Gordon and published by Routledge. This book was released on 2012-05-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controversies in Media Ethics offers students, instructors and professionals multiple perspectives on media ethics issues presenting vast "gray areas" and few, if any, easy answers. This third edition includes a wide range of subjects, and demonstrates a willingness to tackle the problems raised by new technologies, new media, new politics and new economics. The core of the text is formed by 14 chapters, each of which deals with a particular problem or likelihood of ethical dilemma, presented as different points of view on the topic in question, as argued by two or more contributing authors. The 15th chapter is a collection of "mini-chapters," allowing students to discern first-hand how to deal with ethical problems. Contributing authors John A. Armstrong, Peter J. Gade, Julianne H. Newton, Kim Sheehan, and Jane B. Singer provide additional voices and perspectives on various topics under discussion. This edition has been thoroughly updated to provide: discussions of issues reflecting the breadth and depth of the media spectrum numerous real-world examples broad discussion of confidentiality and other timely topics A Companion Website (www.routledge.com/textbooks/9780415963329) supplies resources for both students and instructors. You can also join the Controversies community on Facebook: http://www.facebook.com/CME3rd Developed for use in media ethics courses, Controversies in Media Ethics provides up-to-date discussions and analysis of ethical situations across a variety of media, including issues dealing with the Internet and new media. It provides a unique consideration of ethical concerns, and serves as provocative reading for all media students.

Download or read book Electromagnetic Compatibility in Railways written by Ade Ogunsola and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A railway is a complex distributed engineering system: the construction of a new railway or the modernisation of a existing one requires a deep understanding of the constitutive components and their interaction, inside the system itself and towards the outside world. The former covers the various subsystems (featuring a complex mix of high power sources, sensitive safety critical systems, intentional transmitters, etc.) and their interaction, including the specific functions and their relevance to safety. The latter represents all the additional possible external victims and sources of electromagnetic interaction. EMC thus starts from a comprehension of the emissions and immunity characteristics and the interactions between sources and victims, with a strong relationship to electromagnetics and to system modeling. On the other hand, the said functions are achieved and preserved and their relevance for safety is adequately handled, if the related requirements are well posed and managed throughout the process from the beginning. The link is represented by standards and their correct application, as a support to analysis, testing and demonstration.

Download or read book Small Signal Audio Design written by Douglas Self and published by CRC Press. This book was released on 2020-04-17 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small Signal Audio Design is a highly practical handbook providing an extensive repertoire of circuits that can be assembled to make almost any type of audio system. The publication of Electronics for Vinyl has freed up space for new material, (though this book still contains a lot on moving-magnet and moving-coil electronics) and this fully revised third edition offers wholly new chapters on tape machines, guitar electronics, and variable-gain amplifiers, plus much more. A major theme is the use of inexpensive and readily available parts to obtain state-of-the-art performance for noise, distortion, crosstalk, frequency response accuracy and other parameters. Virtually every page reveals nuggets of specialized knowledge not found anywhere else. For example, you can improve the offness of a fader simply by adding a resistor in the right place- if you know the right place. Essential points of theory that bear on practical audio performance are lucidly and thoroughly explained, with the mathematics kept to an absolute minimum. Self’s background in design for manufacture ensures he keeps a wary eye on the cost of things. This book features the engaging prose style familiar to readers of his other books. You will learn why mercury-filled cables are not a good idea, the pitfalls of plating gold on copper, and what quotes from Star Trek have to do with PCB design. Learn how to: make amplifiers with apparently impossibly low noise design discrete circuitry that can handle enormous signals with vanishingly low distortion use humble low-gain transistors to make an amplifier with an input impedance of more than 50 megohms transform the performance of low-cost-opamps build active filters with very low noise and distortion make incredibly accurate volume controls make a huge variety of audio equalisers make magnetic cartridge preamplifiers that have noise so low it is limited by basic physics, by using load synthesis sum, switch, clip, compress, and route audio signals be confident that phase perception is not an issue This expanded and updated third edition contains extensive new material on optimising RIAA equalisation, electronics for ribbon microphones, summation of noise sources, defining system frequency response, loudness controls, and much more. Including all the crucial theory, but with minimal mathematics, Small Signal Audio Design is the must-have companion for anyone studying, researching, or working in audio engineering and audio electronics.

Download or read book IBM Flex System p260 and p460 Planning and Implementation Guide written by David Watts and published by IBM Redbooks. This book was released on 2012-06-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet today's complex and ever-changing business demands, you need a solid foundation of compute, storage, networking, and software resources that is simple to deploy and can quickly and automatically adapt to changing conditions. You also need to be able to take advantage of broad expertise and proven preferred practices in systems management, applications, hardware maintenance, and more. The IBM® Flex SystemTM p260 and p460 Compute Nodes are IBM Power SystemsTM servers optimized for virtualization, performance, and efficiency. The nodes support IBM AIX®, IBM i, or Linux operating environments, and are designed to run various workloads in IBM PureFlexTM System. This IBM Redbooks® publication is a comprehensive guide to IBM PureFlex System and the Power Systems compute nodes. We introduce the offerings and describe the compute nodes in detail. We then describe planning and implementation steps and go through some of the key the management features of the IBM Flex System Manager management node. This book is for customers, IBM Business Partners, and IBM technical specialists that want to understand the new offerings and to plan and implement an IBM Flex System installation that involves the Power Systems compute nodes.

Download or read book Protective Relaying written by Walter A. Elmore and published by CRC Press. This book was released on 2003-09-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Targeting the latest microprocessor technologies for more sophisticated applications in the field of power system short circuit detection, this revised and updated source imparts fundamental concepts and breakthrough science for the isolation of faulty equipment and minimization of damage in power system apparatus. The Second Edition clearly describes key procedures, devices, and elements crucial to the protection and control of power system function and stability. It includes chapters and expertise from the most knowledgeable experts in the field of protective relaying, and describes microprocessor techniques and troubleshooting strategies in clear and straightforward language.

Download or read book Self on Audio written by Douglas Self and published by Elsevier. This book was released on 2006-06-29 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are a dedicated audiophile who wants to gain a more complete understanding of the design issues behind a truly great amp, or a professional electronic designer seeking to learn more about the art of amplifier design, there can be no better place to start than with the 35 classic magazine articles collected together in this book.Douglas Self offers a tried and tested method for designing audio amplifiers in a way that improves performance at every point in the circuit where distortion can creep in – without significantly increasing cost. Through the articles in this book, he takes readers through the causes of distortion, measurement techniques, and design solutions to minimise distortion and efficiency. Most of the articles are based round the design of a specific amplifier, making this book especially valuable for anyone considering building a Self amplifier from scratch.Self is senior designer with a high-end audio manufacturer, as well as a prolific and highly respected writer. His career in audio design is reflected in the articles in this book, originally published in the pages of Electronics World and Wireless World over a 25 year period. - An audio amp design cookbook, comprising 35 of Douglas Self's definitive audio design articles - Complete designs for readers to build and adapt - An anthology of classic designs for electronics enthusiasts, Hi-Fi devotees and professional designers alike

Download or read book Histochemistry of Single Molecules written by Carlo Pellicciari and published by Springer Nature. This book was released on 2022-09-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details histochemical techniques for the detection of specific molecules or metabolic processes, both at light and electron microscopy. Chapters are divided into seven sections covering Vital histochemistry, Carbohydrate histochemistry, Protein histochemistry, Lipid histochemistry, Nuclear histochemistry, Plant histochemistry and Histochemistry for Nanoscience. Written in the successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible protocols, and notes on troubleshooting and avoiding known pitfalls. The volume also contains three discursive chapters on Histochemistry in advanced cytometry, Lectins and Detection of molecules in plant cell walls by fluorescence microscopy. Authoritative and cutting-edge, Histochemistry of Single Molecules: Methods and Protocols, Second Edition aims to be a useful practical guide for researchers to help further their study in this field.