Download or read book Electrical Transients in Power Systems written by Allan Greenwood and published by Wiley-Interscience. This book was released on 1991-04-18 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles of the First Edition--to teach students and engineers the fundamentals of electrical transients and equip them with the skills to recognize and solve transient problems in power networks and components--also guide this Second Edition. While the text continues to stress the physical aspects of the phenomena involved in these problems, it also broadens and updates the computational treatment of transients. Necessarily, two new chapters address the subject of modeling and models for most types of equipment are discussed. The adequacy of the models, their validation and the relationship between model and the physical entity it represents are also examined. There are now chapters devoted entirely to isolation coordination and protection, reflecting the revolution that metal oxide surge arresters have caused in the power industry. Features additional and more complete illustrative material--figures, diagrams and worked examples. An entirely new chapter of case studies demonstrates modeling and computational techniques as they have been applied by engineers to specific problems.

Download or read book IEEE Recommended Practice for Calculating Short Circuit Currents in Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2006-01-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipment that senses, carries, or interrupts short-circuit currents.

Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.

Download or read book Transients in Electrical Systems Analysis Recognition and Mitigation written by J. C. Das and published by McGraw Hill Professional. This book was released on 2010-05-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detect and Mitigate Transients in Electrical Systems This practical guide explains how to identify the origin of disturbances in electrical systems and analyze them for effective mitigation and control. Transients in Electrical Systems considers all transient frequencies, ranging from 0.1 Hz to 50 MHz, and discusses transmission line and cable modeling as well as frequency dependent behavior. Results of EMTP simulations, solved examples, and detailed equations are included in this comprehensive resource. Transients in Electrical Systems covers: Transients in lumped circuits Control systems Lightning strokes, shielding, and backflashovers Transients of shunt capacitor banks Switching transients and temporary overvoltages Current interruption in AC circuits Symmetrical and unsymmetrical short-circuit currents Transient behavior of synchronous generators, induction and synchronous motors, and transformers Power electronic equipment Flicker, bus, transfer, and torsional vibrations Insulation coordination Gas insulated substations Transients in low-voltage and grounding systems Surge arresters DC systems, short-circuits, distributions, and HVDC Smart grids and wind power generation

Download or read book Switching in Electrical Transmission and Distribution Systems written by René Smeets and published by John Wiley & Sons. This book was released on 2014-10-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switching in Electrical Transmission and Distribution Systems presents the issues and technological solutions associated with switching in power systems, from medium to ultra-high voltage. The book systematically discusses the electrical aspects of switching, details the way load and fault currents are interrupted, the impact of fault currents, and compares switching equipment in particular circuit-breakers. The authors also explain all examples of practical switching phenomena by examining real measurements from switching tests. Other highlights include: up to date commentary on new developments in transmission and distribution technology such as ultra-high voltage systems, vacuum switchgear for high-voltage, generator circuit-breakers, distributed generation, DC-interruption, aspects of cable systems, disconnector switching, very fast transients, and circuit-breaker reliability studies. Key features: Summarises the issues and technological solutions associated with the switching of currents in transmission and distribution systems. Introduces and explains recent developments such as vacuum switchgear for transmission systems, SF6 environmental consequences and alternatives, and circuit-breaker testing. Provides practical guidance on how to deal with unacceptable switching transients. Details the worldwide IEC (International Electrotechnical Commission) standards on switching equipment, illustrating current circuit-breaker applications. Features many figures and tables originating from full-power tests and established training courses, or from measurements in real networks. Focuses on practical and application issues relevant to practicing engineers. Essential reading for electrical engineers, utility engineers, power system application engineers, consultants and power systems asset managers, postgraduates and final year power system undergraduates.

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Download or read book IEEE Guide for AC Motor Protection written by and published by . This book was released on 2000 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally accepted methods of protection for ac motors are provided. This guide identifies and summarizes the functions necessary for adequate protection of motors based on type, size, and application. This guide does not purport to detail the protective requirements if all motors in every situation.

Download or read book Protective Relaying for Power Generation Systems written by Donald Reimert and published by CRC Press. This book was released on 2017-12-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power outages have considerable social and economic impacts, and effective protection schemes are crucial to avoiding them. While most textbooks focus on the transmission and distribution aspects of protective relays, Protective Relaying for Power Generation Systems is the first to focus on protection of motors and generators from a power generation perspective. It also includes workbook constructions that allow students to perform protection-related calculations in Mathcad® and Excel®. This text provides both a general overview and in-depth discussion of each topic, making it easy to tailor the material to students' needs. It also covers topics not found in other texts on the subject, including detailed time decrement generator fault calculations and minimum excitation limit. The author clearly explains the potential for damage and damaging mechanisms related to each protection function and includes thorough derivations of complex system interactions. Such derivations underlie the various rule-of-thumb setting criteria, provide insight into why the rules-of-thumb work and when they are not appropriate, and are useful for post-incident analysis. The book's flexible approach combines theoretical discussions with example settings that offer quick how-to information. Protective Relaying for Power Generation Systems integrates fundamental knowledge with practical tools to ensure students have a thorough understanding of protection schemes and issues that arise during or after abnormal operation.

Download or read book Electromagnetic Compatibility in Railways written by Ade Ogunsola and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A railway is a complex distributed engineering system: the construction of a new railway or the modernisation of a existing one requires a deep understanding of the constitutive components and their interaction, inside the system itself and towards the outside world. The former covers the various subsystems (featuring a complex mix of high power sources, sensitive safety critical systems, intentional transmitters, etc.) and their interaction, including the specific functions and their relevance to safety. The latter represents all the additional possible external victims and sources of electromagnetic interaction. EMC thus starts from a comprehension of the emissions and immunity characteristics and the interactions between sources and victims, with a strong relationship to electromagnetics and to system modeling. On the other hand, the said functions are achieved and preserved and their relevance for safety is adequately handled, if the related requirements are well posed and managed throughout the process from the beginning. The link is represented by standards and their correct application, as a support to analysis, testing and demonstration.

Download or read book Wide Area Power Systems Stability Protection and Security written by Hassan Haes Alhelou and published by Springer Nature. This book was released on 2020-09-21 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes new control and protection schemes to improve the overall stability and security of future wide-area power systems. It focuses on the high penetration levels of renewable energy sources and distributed generation, particularly with the trend towards smart grids. The control methods discussed can improve the overall stability in normal and abnormal operation conditions, while the protection methods presented can be used to ensure the secure operation of systems under most severe contingencies. Presenting stability, security, and protection methods for power systems in one concise volume, this book takes the reader on a journey from concepts and fundamentals to the latest and future trends in each topic covered, making it an informative and intriguing read for researchers, graduate students, and practitioners alike.

Download or read book Synchronized Phasor Measurements and Their Applications written by A.G. Phadke and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an account of the field of synchronized Phasor Measurement technology, its beginning, its technology and its principal applications. It covers wide Area Measurements (WAM) and their applications. The measurements are done using GPS systems and eventually will replace the existing technology. The authors created the field about twenty years ago and most of the installations planned or now in existence around the world are based on their work.

Download or read book Numerical Differential Protection written by Gerhard Ziegler and published by John Wiley & Sons. This book was released on 2012-01-27 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential protection is a fast and selective method of protection against short-circuits. It is applied in many variants for electrical machines, trans-formers, busbars, and electric lines. Initially this book covers the theory and fundamentals of analog and numerical differential protection. Current transformers are treated in detail including transient behaviour, impact on protection performance, and practical dimensioning. An extended chapter is dedicated to signal transmission for line protection, in particular, modern digital communication and GPS timing. The emphasis is then placed on the different variants of differential protection and their practical application illustrated by concrete examples. This is completed by recommendations for commissioning, testing and maintenance. Finally the design and management of modern differential protection is explained by means of the latest Siemens SIPROTEC relay series. As a textbook and standard work in one, this book covers all topics, which have to be paid attention to for planning, designing, configuring and applying differential protection systems. The book is aimed at students and engineers who wish to familiarise themselves with the subject of differential protection, as well as the experienced user entering the area of numerical differential protection. Furthermore, it serves as a reference guide for solving application problems. For the new edition all contents have been revised, extended and updated to the latest state-of-the-art of protective relaying.

Download or read book Smart Grids and Their Communication Systems written by Ersan Kabalci and published by Springer. This book was released on 2018-09-01 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a broad overview of emerging smart grid technologies and communication systems, offering a helpful guide for future research in the field of electrical engineering and communication engineering. It explores recent advances in several computing technologies and their performance evaluation, and addresses a wide range of topics, such as the essentials of smart grids for fifth generation (5G) communication systems. It also elaborates the role of emerging communication systems such as 5G, internet of things (IoT), IEEE 802.15.4 and cognitive radio networks in smart grids. The book includes detailed surveys and case studies on current trends in smart grid systems and communications for smart metering and monitoring, smart grid energy storage systems, modulations and waveforms for 5G networks. As such, it will be of interest to practitioners and researchers in the field of smart grid and communication infrastructures alike.

Download or read book eIoT written by Steffi O. Muhanji and published by Springer. This book was released on 2019-02-20 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the collision between the sustainable energy transition and the Internet of Things (IoT). In that regard, this book’s arrival is timely. Not only is the Internet of Things for energy applications, herein called the energy Internet of Things (eIoT), rapidly developing but also the transition towards sustainable energy to abate global climate is very much at the forefront of public discourse. It is within the context of these two dynamic thrusts, digitization and global climate change, that the energy industry sees itself undergoing significant change in how it is operated and managed. This book recognizes that they impose five fundamental energy management change drivers: 1.) the growing demand for electricity, 2.) the emergence of renewable energy resources, 3.) the emergence of electrified transportation, 4.) the deregulation of electric power markets, 5.) and innovations in smart grid technology. Together, they challenge many of the assumptions upon which the electric grid was first built. The goal of this book is to provide a single integrated picture of how eIoT can come to transform our energy infrastructure. This book links the energy management change drivers mentioned above to the need for a technical energy management solution. It, then, describes how eIoT meets many of the criteria required for such a technical solution. In that regard, the book stresses the ability of eIoT to add sensing, decision-making, and actuation capabilities to millions or perhaps even billions of interacting “smart" devices. With such a large scale transformation composed of so many independent actions, the book also organizes the discussion into a single multi-layer energy management control loop structure. Consequently, much attention is given to not just network-enabled physical devices but also communication networks, distributed control & decision making, and finally technical architectures and standards. Having gone into the detail of these many simultaneously developing technologies, the book returns to how these technologies when integrated form new applications for transactive energy. In that regard, it highlights several eIoT-enabled energy management use cases that fundamentally change the relationship between end users, utilities, and grid operators. Consequently, the book discusses some of the emerging applications for utilities, industry, commerce, and residences. The book concludes that these eIoT applications will transform today’s grid into one that is much more responsive, dynamic, adaptive and flexible. It also concludes that this transformation will bring about new challenges and opportunities for the cyber-physical-economic performance of the grid and the business models of its increasingly growing number of participants and stakeholders.

Download or read book Power Circuit Breaker Theory and Design written by Charles H. Flurscheim and published by IET. This book was released on 1982 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title discusses, in depth, the wide range of technologies that are involved in power circuit breaker design by analysing the theoretical and practical problems.

Download or read book IEEE Design Guide for Electric Power Service Systems for Generating Stations written by American National Standards Institute and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1993-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.