Download or read book Electrical Safety Code Manual written by Kimberley Keller and published by Butterworth-Heinemann. This book was released on 2010-07-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures
Download or read book IEEE Std 1364 2005 Revision of IEEE Std 1364 2001 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Records of the 2002 IEEE International Workshop on Memory Technology Design and Testing written by Bernard Courtois and published by IEEE Computer Society Press. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation MTDT 2002 explores the state-of-the-art in semiconductor memories. Over the last 10 years, the scope of the Workshop has been expanded to cover the fabrication technology and the memory design, test and reliability.
Download or read book Coplanar Waveguide Circuits Components and Systems written by Rainee N. Simons and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of the analysis and applications of coplanar waveguides to microwave circuits and antennas The unique feature of coplanar waveguides, as opposed to more conventional waveguides, is their uniplanar construction, in which all of the conductors are aligned on the same side of the substrate. This feature simplifies manufacturing and allows faster and less expensive characterization using on-wafer techniques. Coplanar Waveguide Circuits, Components, and Systems is an engineer's complete resource, collecting all of the available data on the subject. Rainee Simons thoroughly discusses propagation parameters for conventional coplanar waveguides and includes valuable details such as the derivation of the fundamental equations, physical explanations, and numerical examples. Coverage also includes: Discontinuities and circuit elements Transitions to other transmission media Directional couplers, hybrids, and magic T Microelectromechanical systems based switches and phase shifters Tunable devices using ferroelectric materials Photonic bandgap structures Printed circuit antennas
Download or read book IEEE Guide for Design of Substation Rigid bus Structures written by and published by . This book was released on 1999 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigid-bus structures for outdoor and indoor, air-insulated, and alternating-current substations are covered. Portions of this guide are also applicable to strain-bus structures or direct-current substations, or both. Ampacity, radio influence, vibration, and forces due to gravity, wind, fault current, and thermal expansion are considered. Design criteria for conductor and insulator strength calculations are included.
Download or read book Multi Agent Programming written by Rafael H. Bordini and published by Springer Science & Business Media. This book was released on 2009-06-13 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-Agent Systems are a promising technology to develop the next generation open distributed complex software systems. The main focus of the research community has been on the development of concepts (concerning both mental and social attitudes), architectures, techniques, and general approaches to the analysis and specification of multi-agent systems. This contribution has been fragmented, without any clear way of “putting it all together”, rendering it inaccessible to students and young researchers, non-experts, and practitioners. Successful multi-agent systems development is guaranteed only if we can bridge the gap from analysis and design to effective implementation. Multi-Agent Programming: Languages, Tools and Applications presents a number of mature and influential multi-agent programming languages, platforms, development tools and methodologies, and realistic applications, summarizing the state of the art in an accessible manner for professionals and computer science students at all levels.
Download or read book Electromagnetic Band Gap Structures in Antenna Engineering written by Fan Yang and published by Cambridge University Press. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a detailed account of electromagnetic band gap (EBG) theory, analysis and applications, ideal for researchers and engineers.
Download or read book Standard Handbook for Electrical Engineers Sixteenth Edition written by H. Wayne Beaty and published by McGraw Hill Professional. This book was released on 2012-09-03 with total page 2145 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE MOST COMPLETE AND CURRENT GUIDE TO ELECTRICAL ENGINEERING For more than a century, the Standard Handbook for Electrical Engineers has served as the definitive source for all the pertinent electrical engineering data essential to both engineering students and practicing engineers. It offers comprehensive information on the generation, transmission, distribution, control, operation, and application of electric power. Completely revised throughout to address the latest codes and standards, the 16th Edition of this renowned reference offers new coverage of green technologies such as smart grids, smart meters, renewable energy, and cogeneration plants. Modern computer applications and methods for securing computer network infrastructures that control power grids are also discussed. Featuring hundreds of detailed illustrations and contributions from more than 75 global experts, this state-of-the-art volume is an essential tool for every electrical engineer. Standard Handbook for Electrical Engineers, 16th Edition, covers: Units, symbols, constants, definitions, and conversion factors * Electric and magnetic circuits * Measurements and instruments * Properties of materials * Generation * Prime movers * Alternating-current generators * Direct-current generators * Hydroelectric power generation * Power system components * Alternate sources of power * Electric power system economics * Project economics * Transmission systems * High-voltage direct-current power transmission * Power system operations * Substations * Power distribution * Wiring design for commercial and industrial buildings * Motors and drives * Industrial and commercial applications of electric power * Power electronics * Power quality and reliability * Grounding systems * Computer applications in the electric power industry * Illumination * Lightning and overvoltage protection * Standards in electrotechnology, telecommunications, and information technology
Download or read book Transmission Expansion Planning The Network Challenges of the Energy Transition written by Sara Lumbreras and published by Springer Nature. This book was released on 2020-11-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a panoramic look at the transformation of the transmission network in the context of the energy transition. It provides readers with basic definitions as well as details on current challenges and emerging technologies. In-depth chapters cover the integration of renewables, the particularities of planning large-scale systems, efficient reduction and solution methods, the possibilities of HVDC and super grids, distributed generation, smart grids, demand response, and new regulatory schemes. The content is complemented with case studies that highlight the importance of the power transmission network as the backbone of modern energy systems. This book will be a comprehensive reference that will be useful to both academics and practitioners.
Download or read book Electric Power Substations Engineering written by John D. McDonald and published by CRC Press. This book was released on 2016-04-19 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining select chapters from Grigsby's standard-setting The Electric Power Engineering Handbook with several chapters not found in the original work, Electric Power Substations Engineering became widely popular for its comprehensive, tutorial-style treatment of the theory, design, analysis, operation, and protection of power substations. For its
Download or read book Bird Friendly Building Design written by Christine Sheppard and published by . This book was released on 2015-11-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Radar Signal Processing Third Edition written by Mark A. Richards and published by McGraw Hill Professional. This book was released on 2022-04-01 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide to the full spectrum of fundamental radar signal processing systems—fully updated for the latest advances This thoroughly revised resource offers comprehensive coverage of foundational digital signal processing methods for both pulsed and FMCW radar. Developed from the author’s extensive academic and professional experience, Fundamentals of Radar Signal Processing, Third Edition covers all of the digital signal processing techniques that form the backbone of modern radar systems, revealing the common threads that unify them. The basic tools of linear systems, filtering, sampling, and Fourier analysis are used throughout to provide a unified tutorial approach. You will get end-of-chapter problems that reinforce and apply salient points as well as an online suite of tutorial MATLAB(R) demos and supplemental technical notes. Classroom instructors additionally receive a solutions manual and sample MATLAB® tutorial demos. Coverage includes: An introduction to radar systems Signal models Data acquisition and organization Waveforms and pulse compression Doppler processing Threshold detection and CFAR Measurements and tracking Synthetic aperture imaging Adaptive array processing and STAP
Download or read book New Trends in Intelligent Software Methodologies Tools and Techniques written by H. Fujita and published by IOS Press. This book was released on 2017-09-07 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software is an essential enabler for science and the new economy. It creates new markets and directions for a more reliable, flexible and robust society and empowers the exploration of our world in ever more depth, but it often falls short of our expectations. Current software methodologies, tools, and techniques are still neither robust nor reliable enough for the constantly evolving market, and many promising approaches have so far failed to deliver the solutions required. This book presents the keynote ‘Engineering Cyber-Physical Systems’ and 64 peer-reviewed papers from the 16th International Conference on New Trends in Intelligent Software Methodology Tools, and Techniques, (SoMeT_17), held in Kitakyushu, Japan, in September 2017, which brought together researchers and practitioners to share original research results and practical development experience in software science and related new technologies. The aim of the SoMeT conferences is to capture the essence of the new state-of-the-art in software science and its supporting technology and to identify the challenges such technology will have to master. The book explores new trends and theories which illuminate the direction of developments in this field, and will be of interest to anyone whose work involves software science and its integration into tomorrow’s global information society.
Download or read book Innovation and Industrialization in Asia written by Rajah Rasiah and published by Routledge. This book was released on 2013-09-13 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing accounts of East Asia’s meteoric growth and structural change has either been explained as one dictated essentially by markets with strong macroeconomic fundamentals, or a consequence of proactive governments. This book departs from such a dichotomy by examining inductively the drivers of the experiences. Given the evolutionary treatment of each economic good and service as different, this book examines technological catch up with a strong focus on the industries contributing significantly to the economic growth of the countries selected in Asia. The evidence produced supports the evolutionary logic of macro, meso and micro interactions between several institutions, depending on the actors involved, structural location and typology of taxonomies and trajectories. The book carefully picks out experiences from the populous economies of China, India and Indonesia, the high income economies of Korea and Taiwan, the middle income economies of Malaysia and Thailand, and the transitional least developed country of Myanmar. Chapters 1-7 of this book were originally published as a special issue of Journal of the Asia Pacific Economy.
Download or read book Journal of Dynamic Systems Measurement and Control written by and published by . This book was released on 2007 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Safety Handbook 3E written by John Cadick and published by McGraw Hill Professional. This book was released on 2005-10-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an accident-avoiding prescription for electricians, safety managers, and inspectors, and engineers dealing with electricity any voltage level. Presenting crucial protective safety strategies for industrial and commercial systems, the Handbook references all major safety codes (OSHA, NEC, NESC, and NFPA) where appropriate, creating a unique, one-stop compliance manual for any company’s electrical safety training and reference needs.
