Download or read book IEEE Std 802 3 2000 Edition Part 3 Carrier Sense Multiple Access With Collision Detect on CSMA CD Access Method and Physical Layer Specifications written by Institute of Electrical and Electronics Engineers and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incoporating IEEE Std 802.3, 1998 Edition, IEEE Std 802.3ac-1998, IEEE Std 802.3ab-1999, and IEEE Std 802.3ad-2000. Superseded by 802.3-2002 (802.3ag). The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium local area networks are described. The control characteristics for full duplex dedicated channel use are also described. Specifications are provided for MAU types 1BASE5 at 1 Mb/s; Attachment Unit Interface (AUI) and MAU types 10BASE5, 10BASE2, FOIRL (fiber optic inter-repeater link), 10BROAD36, 10BASE-T, 10BASE-FL, 10BASE-FB, and 10BASE-FP at 10 Mb/s; Media Independent Interface (MII) and PHY types 100BASE-T4, 100BASE-TX, 100BASE-FX, and 100BASE-T2 at 100 Mb/s; and the Gigabit MII (GMII) and 1000BASE-X PHY types, 1000BASE-SX, 1000BASE-LX, and 1000BASE-CX, which operate at 1000 Mb/s (Gigabit Ethernet) as well as PHY type 1000BASE-T. Repeater specifications are provided at each speed. Full duplex specifications are provided at the Physical Layer for 10BASE-T, 10BASE-FL, 100BASE-TX, 100BASE-FX, 100BASE-T2, and Gigabit Ethernet. System considerations for multi-segment networks at each speed and management information base (MIB) specifications and additions to support Virtual Bridged Local Area Networks (VLANs) as specified in IEEE P802.1Q are also provided. Also specified is an optional Link Aggregation sublayer which multiple physical links to be aggregated together to form a single logical link.
Download or read book Signaling and Switching for Packet Telephony written by Matthew Stafford and published by Artech House. This book was released on 2004 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This must-have reference on packet switching and signaling offers you an in-depth understanding of the core packet switching architectures, signaling flows, and packet formats, as well as service delivery. It describes in detail the design principles for packet telephone switches and emphasizes the benefits of a distributed architecture and separating bearer and control. Successful carrier-grade deployments of packet telephony entail much more than simply stuffing voice samples into IP packets or ATM cells. They involve deploying multiple protocols, and this book gives you a solid understanding of all protocols used and a clear sense of where individual protocols fit in a packet-based system.
Download or read book CRC Handbook of Modern Telecommunications written by Patricia A. Morreale and published by CRC Press. This book was released on 2018-09-03 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the most dynamic areas of the ever-changing telecommunications landscape, the second edition of the bestselling CRC Handbook of Modern Telecommunications once again brings together the top minds and industry pioneers in wireless communication networks, protocols, and devices. In addition to new discussions of radio frequency identification (RFID) and wireless sensor networks, including cognitive radio networks, this important reference systematically addresses network management and administration, as well as network organization and governance, topics that have evolved since the development of the first edition. Extensively updated and expanded, this second edition provides new information on: Wireless sensor networks RFID Architectures Intelligent Support Systems Service delivery integration with the Internet Information life cycle and service level management Management of emerging technologies Web performance management Business intelligence and analytics The text details the latest in voice communication techniques, advanced communication concepts, network organization, governance, traffic management, and emerging trends. This comprehensive handbook provides telecommunications professionals across all fields with ready access to the knowledge they require and arms them with the understanding of the role that evolving technologies will play in the development of the telecommunications systems of tomorrow.
Download or read book High Speed Networking written by James P. G. Sterbenz and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading authorities deliver the commandments for designing high-speed networks There are no end of books touting the virtues of one or another high-speed networking technology, but until now, there were none offering networking professionals a framework for choosing and integrating the best ones for their organization's networking needs. Written by two world-renowned experts in the field of high-speed network design, this book outlines a total strategy for designing high-bandwidth, low-latency systems. Using real-world implementation examples to illustrate their points, the authors cover all aspects of network design, including network components, network architectures, topologies, protocols, application interactions, and more.
Download or read book IEEE Std 802 3 2000 Edition written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unified IP Internetworking written by Dhiman D. Chowdhury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified IP Internetworking is the best resource for building intranet and enterprise networks today. Using the newly revived Internet Protocol (IP) design, dynamic bandwidth allocation, traffic class identification, service level agreement, multiservice transport and quality of service are now all possible. This book examines the power and flexibility of the IP in meeting these and future challenges while providing step by step explanations and testing techniques for building a network.
Download or read book High Speed LAN Technology Handbook written by Dhiman D. Chowdhury and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the architectures, design principles, and troubleshooting techniques of a LAN, imparted via the presentation of a broad scope of data and computer communication standards, real-world inter-networking techniques, architectures, hardware, software, protocols, technologies and services as they relate to the design, implementation and troubleshooting of such a network.
Download or read book Network Processors written by Ran Giladi and published by Morgan Kaufmann. This book was released on 2008-08-29 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network processors are the basic building blocks of today's high-speed, high-demand, quality-oriented communication networks. Designing and implementing network processors requires a new programming paradigm and an in-depth understanding of network processing requirements. This book leads the reader through the requirements and the underlying theory of networks, network processing, and network processors. It covers implementation of network processors and intergrates EZchip Microcode Development Environment so that you can gain hands-on experience in writing high-speed networking applications. By the end of the book, the reader will be able to write and test applications on a simulated network processor. - Comprehensive, theoretical, and pracitical coverage of networks and high-speed networking applications - Descirbes contemporary core, metro, and access networks and their processing algorithms - Covers network processor architectures and programming models, enabling readers to assess the optimal network processor typer and configuration for their application - Free download from http://www.cse.bgu.ac.il/npbook includes microcode development tools that provide hands-on experience with programming a network processor
Download or read book An Introduction to Packet Microwave Systems and Technologies written by Paolo Volpato and published by Artech House. This book was released on 2016-12-31 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a thorough introduction to packet microwave systems and technologies, this unique book focuses on the architecture of microwave networks and the applications of packet microwaves, particularly in mobile backhaul. IP and data technologies which are the key differentiator of packet microwave systems are explored. Microwave applications and packet microwave, including radio equipment chain, full-indoor and outdoor applications, and operational aspects are presented along with packet microwave in hybrid applications and packet technologies for capacity scale. The structure of packet microwave network and mobile backhaul along with a glance at the evolution of packet microwave are discussed. Readers find support for end-to-end design of transmission services in this book.
Download or read book IEEE Standard for Information Technology written by and published by . This book was released on 2002 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The media access control characteristics for the Carrier Sense Multiple access with Collision Detection (CSMA/CD) access method for shared medium local area networks are described. The control characteristics for full duplex dedicated channel use are also described. Specifications are provided for MAU types 1BASE5 at 1 Mb/s; Attachment unit Interface (AUI) and MAU types 10BASE5, 10BASE2, FOIRL (fiber optic inter-repeater link), 10BROAD36, 10BASE-T, 10BASE-FL, 10BASE-FB, and 10BASE-FP at 10 Mb/s; Media Independent Interface (MII) and PHY types 100BASE-T4, 100BASE-TX, 100BASE-FX and 100BASE-T2 at 100 Mb/s; and the Gigabit MII (GMII) and 1000BASE-X PHY types, 1000BASE-SX, 1000BASE-LX, and1000BASE-CX, which operate at 1000 Mb/s (Gigabit Ethernet) as well as PHY type 1000BASE-T. Repeater specifications are provided at each speed. Full duplex specifications are provided at the Physical Layer for 10BASE-T 10BASE-FL, 100BASE-TX, 100BASE-FX, 100BASE-T2, and Gigabit Ethernet. System considerations for multisegment networks at each speed and management information base (MIB) specifications and additions to support Virtual Bridged Local Area Networks (VLANs) as specified in IEEE P802.1Q are also provided. Also specified is an optional Link Aggregation sublayer which multiple physical links to be aggregated together to form a single logical link.
Download or read book Ethernet Passive Optical Networks written by Glen Kramer and published by McGraw Hill Professional. This book was released on 2005-03-22 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethernet Passive Optical Networks is the IEEE's (Institute of Electrical and Electronics Engineers) approved architecture of choice for the next generation of broadband access. Written by an author of the IEEE 802.3ah standard, this is the first book to explain the EPON architecture, analyze its performance, and annotate the standard. For any engineer or graduate student building equipment for broadband access or service provider offering such service, this will serve as the "authorized" guide to EPON.
Download or read book Ethernet The Definitive Guide written by Charles E. Spurgeon and published by "O'Reilly Media, Inc.". This book was released on 2000-02-09 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethernet is a core networking technology used by every high tech business. While the basic protocols have changed little, new options such as Fast Ethernet and Gigabit Ethernet have increased the complexity of the topic. Ethernet has been the flavor of choice for networking administrators since the early 1980s because of its ease of use and scalability. Written by one of the foremost experts on Ethernet standards and configuration, Charles E. Spurgeon, Ethernet: The Definitive Guide includes everything you need to know to set up and maintain an Ethernet network. Ethernet: The Definitive Guide teaches you everything you need to know about the IEEE 802.3 Ethernet standard and its protocols. The book is logically separated into five parts: Introduction to Ethernet provides a tour of basic Ethernet theory and operation, including a description of Ethernet frames, operation of the Media Access Control (MAC) protocol, full-duplex mode and auto-negotiation. Ethernet Media Systems is the heart of the book. This sectionof Ethernet: The Definitive Guide shows you how to build media-specific Ethernet networks, from a basic 10BASE-T Ethernet offering 10 Mbps over twisted-pair cables, to an advanced 1000BASE-X Gigabit Ethernet, providing up to 1 Gbps of data transfer over fiber optic cables. Building Your Ethernet System teaches you how to build twisted-pair and fiber optic media segments, as well as how to build your Ethernet using repeaters and hubs. Performance and Troubleshooting is divided into two chapters. The first describes both the performance of a given Ethernet channel, as well as the performance of the entire network system. The second includes a tutorial on troubleshooting techniques and describes the kinds of problems network administrators are likely to encounter. The last part of the book includes a complete glossary of terms used throughout the book, a resource list, descriptions of thick and thin coax-based Ethernet systems, a guide to AUI equipment installation and configuration, and a listing of troubleshooting numbers. This book is the definitive guide for anyone wanting to build a scalable local area network (LAN) using Ethernet.
Download or read book Integrated Broadband Networks written by Byeong Gi Lee and published by Artech House. This book was released on 2002 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Explanations of the technologies are provided within the concepts of architecture and layering models, multiplexing and switching methods, routing algorithms and protocols, network control, traffic management methods, and QoS support. The book also offers one of the first overviews of the IP over WDM field."--Cover.
Download or read book Wireless Security Essentials written by Russell Dean Vines and published by John Wiley & Sons. This book was released on 2002-10-02 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wireless device usage increases worldwide, so does the potential for malicious code attacks. In this timely book, a leading national authority on wireless security describes security risks inherent in current wireless technologies and standards, and schools readers in proven security measures they can take to minimize the chance of attacks to their systems. * Russell Dean Vines is the coauthor of the bestselling security certification title, The CISSP Prep Guide (0-471-41356-9) * Book focuses on identifying and minimizing vulnerabilities by implementing proven security methodologies, and provides readers with a solid working knowledge of wireless technology and Internet-connected mobile devices
Download or read book Proceedings of the IEEE International Symposium on Industrial Electronics written by and published by . This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SDH SONET Explained in Functional Models written by Huub van Helvoort and published by John Wiley & Sons. This book was released on 2005-11-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: H/SONET Explained in Functional Models represents a fresh approach to the modeling of transport network technologies. This practical guide and reference text uncovers the description of SDH (Synchronous Digital Hierarchy), SONET (Synchronous Optical Network) and OTN (Optical Transport Network) transport networks and equipment using functional/atomic modeling techniques. It clearly explains the use of models in the ITU-T and ETSI standards, the transport networks and the transport equipment in the definition, implementation and deployment phase. Pays particular attention to the SDH and OTN standards using functional/atomic modeling, as used and defined in the ITU-T (International Telecommunication Union) recommendations G.805 and G.809 and the ETSI (European Telecommunications Standards Institute) standards EN 300 417, as opposed to the formal language used in the ANSI (American National Standards Institute) standard T1.105. Topics of discussion range from functional modeling high level transport networks to the most detailed device functions, aided by a variety of figures and tables. Shows that functional modeling is not restricted to SDH/SONET but that is can be used to describe any transport network, connection-oriented and connectionless, e.g. Ethernet and MPLS networks. Written by a leading authority in the area, this is the first book dedicated to the novel approach of using functional modeling to describe SDH/SONET/OTN networks. This volume will appeal to manufacturers, engineers and all those involved in developing and deploying SDH, SONET, OTN, Ethernet, MPLS technology. It will be an invaluable resource for postgraduate students on network communications courses and advanced users using functional modeling.
Download or read book Networking Concepts written by and published by . This book was released on 2003 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
