Download or read book IEEE Std 112 1984 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Std 112 1991 written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficient Electric Motors Revised and Expanded written by Ali Emadi and published by CRC Press. This book was released on 2018-10-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed reference provides guidelines for the selection and utilization of electric motors for improved reliability, performance, energy-efficiency, and life-cycle cost. Completely revised and expanded, the book reflects the recent state of the field, as well as recent developments in control electronics, the economics of energy-efficient motors and systems, and advanced power electronic drivers. It includes five new chapters covering key topics such as the fundamentals of power electronics applicable to electric motor drives, adjustable speed drives and their applications, advanced switched reluctance motor drives, and permanent magnet and brushless DC motor drives.
Download or read book Electric Power Generation Transmission and Distribution Third Edition written by Leonard L. Grigsby and published by CRC Press. This book was released on 2012-05-16 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: Electric power generation: nonconventional methods Electric power generation: conventional methods Transmission system Distribution systems Electric power utilization Power quality L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Saifur Rahman, Rama Ramakumar, George Karady, Bill Kersting, Andrew Hanson, and Mark Halpin present substantially new and revised material, giving readers up-to-date information on core areas. These include advanced energy technologies, distributed utilities, load characterization and modeling, and power quality issues such as power system harmonics, voltage sags, and power quality monitoring. With six new and 16 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New chapters cover: Water Transmission Line Reliability Methods High Voltage Direct Current Transmission System Advanced Technology High-Temperature Conduction Distribution Short-Circuit Protection Linear Electric Motors A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (ISBN: 9781439883204) K12650 Electric Power Substations Engineering, Third Edition (ISBN: 9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (ISBN: 9781439856291)
Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1985 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book IEEE Standards written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1994 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Std 693 1984 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficient Electric Motors Third Edition Revised and Expanded written by John C. Andreas and published by CRC Press. This book was released on 1992-02-24 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated throughout, the second edition of Energy-Efficient Electric Motors provides guidelines for picking and using electric motors on an energy conservation and life-cycle cost basis - emphasizing both single- and three-phase motors in the 1- to 200-hp range that offer maximum opportunities for energy savings.;Maintaining the features of the first edition, this concise resource: explains current improvements in electric motor capabilities and recently adopted NEMA energy-efficient motor standards; contains a new section about the power factor with nonlinear loads; covers the performance of polyphase induction motors supplied by adjustable frequency power supplies for several types of loads, presents information on numerous kinds of power semiconductors used in variable-frequency power supply systems; provides expanded coverage comparing various types of adjustable speed drives when applied to constant torque and variable torque loads; and contains a new summary checklist criteria for selecting induction motors for adjustable frequency drive systems.;Generously illustrated with nearly 200 figures and tables, the second edition of Energy-Efficient Electric Motors is timely reading for electrical, electronics, mechanical, consulting, specifying, and plant engineers; plant and purchasing managers; original equipment, heating, ventilating, and air-conditioning manufacturers; and continuing-education courses in these disciplines.
Download or read book Electrical Machines and Their Applications written by Ali Mehrizi-Sani and published by CRC Press. This book was released on 2024-01-19 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This popular, easy-to-read book offers a comprehensive yet unique treatment of electrical machines and their historical development. Electrical Machines and Their Applications, Third Edition covers an in-depth analysis of machines augmented with ample examples, which makes it suitable for both those who are new to electric machines and for those who want to deepen their knowledge of electric machines. This book provides a thorough discussion of electrical machines. It starts by reviewing the basics of concepts needed to fully understand the machines, e.g., three-phase circuits and fundamentals of energy conversion, and continues to discuss transformers, induction machines, synchronous machines, dc machines, and other special machines and their dynamics. This natural progression creates a unifying theme and helps the reader appreciate how the same physical laws of energy conversion govern the operation and dynamics of different machine types. The text is sprinkled with ample examples to further solidify the discussed concepts. Several well-placed appendices make the book self-contained and even easier to follow. This book is part of a series on power system topics originally authored by the late Turan Gönen. The book has been edited by Ali Mehrizi-Sani to bring it up to date while maintaining its original charm. Both new and seasoned readers for Gönen’s books will find this new edition a much-awaited update to the second edition.
Download or read book IEEE Tutorial on Adjustable Speed Drives written by and published by . This book was released on 1989 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Std 978 1984 written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Std 805 1984 written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Electric Motors written by Hamid A. Toliyat and published by CRC Press. This book was released on 2018-10-03 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current issues in electric motor design, installation, application, and performance, this second edition serves as the most authoritative and reliable guide to electric motor utilization and assessment in the commercial and industrial sectors. Covering topics ranging from motor energy and efficiency to computer-aided design and equipment selection, this reference assists professionals in all aspects of electric motor maintenance, repair, and optimization. It has been expanded by more than 40 percent to explore the most influential technologies in the field including electronic controls, superconducting generators, recent analytical tools, new computing capabilities, and special purpose motors.
Download or read book IEEE 1984 Annual Textile Industry Technical Conference written by and published by . This book was released on 1984 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Std 521 1984 written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Design Standards written by United States. Bureau of Reclamation and published by . This book was released on 1992 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
