Download or read book IEEE Recommended Practice for Electric Power Systems in Commercial Buildings written by IEEE Industry Applications Society. Industrial and Commercial Power Systems Committee and published by John Wiley & Sons. This book was released on 1974 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
Download or read book IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems written by and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Recommended Practice for Monitoring Electric Power Quality written by and published by . This book was released on 2009 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This recommended practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. This recommended practice describes nominal conditions and deviations from these nominal conditions that may originate within the source of supply or load equipment or may originate from interactions between the source and the load. Also, this recommended practice discusses power quality monitoring devices, application techniques, and the interpretation of monitoring results. Keywords: assessment, compatibility, dip, distortion, electromagnetic phenomena, harmonics, imbalance, instruments, monitoring, power quality, rms variation, sag, swell, transient, unbalance.
Download or read book Handbook to IEEE Standard 45 written by Mohammed M. Islam and published by Standards Information Network. This book was released on 2004-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEEE 45™-2002 is an excellent standard, which is widely used for selecting shipboard electrical and electronic system equipment and its installation. The standard is a living document often interpreted differently by different users. Handbook to IEEE Standard 45™: A Guide to Electrical Installations on Shipboard provides a detailed background of the changes in IEEE Std 45-2002 and the reasoning behind the changes as well as explanation and adoption of other national and international standards. It contains the complete text of IEEE 45™-2002 relevant clauses, along with explanatory commentary consisting of: - Recommendation intent and interpretation - Historical perspective - Application - Supporting illustrations, drawings and tables This Handbook provides necessary technical details in a simplified form to enhance understanding of the requirements for technical and non-technical people in the maritime industry.
Download or read book IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1987-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IEEE Orange Book presents the recommended engineering practices for the selection and application of emergency and standby power systems. It provides commercial facility designers, operators and owners with guidelines for assuring uninterrupted power.
Download or read book Electric Power System Basics for the Nonelectrical Professional written by Steven W. Blume and published by John Wiley & Sons. This book was released on 2016-12-05 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Steven W. Blume’s bestseller provides a comprehensive treatment of power technology for the non-electrical engineer working in the electric power industry This book aims to give non-electrical professionals a fundamental understanding of large interconnected electrical power systems, better known as the “Power Grid”, with regard to terminology, electrical concepts, design considerations, construction practices, industry standards, control room operations for both normal and emergency conditions, maintenance, consumption, telecommunications and safety. The text begins with an overview of the terminology and basic electrical concepts commonly used in the industry then it examines the generation, transmission and distribution of power. Other topics discussed include energy management, conservation of electrical energy, consumption characteristics and regulatory aspects to help readers understand modern electric power systems. This second edition features: New sections on renewable energy, regulatory changes, new measures to improve system reliability, and smart technologies used in the power grid system Updated practical examples, photographs, drawing, and illustrations to help the reader gain a better understanding of the material “Optional supplementary reading” sections within most chapters to elaborate on certain concepts by providing additional detail or background Electric Power System Basics for the Nonelectrical Professional, Second Edition, gives business professionals in the industry and entry-level engineers a strong introduction to power technology in non-technical terms. Steve W. Blume is Founder of Applied Professional Training, Inc., APT Global, LLC, APT College, LLC and APT Corporate Training Services, LLC, USA. Steve is a registered professional engineer and certified NERC Reliability Coordinator with a Master's degree in Electrical Engineering specializing in power and a Bachelor's degree specializing in Telecommunications. He has more than 25 years’ experience teaching electric power system basics to non-electrical professionals. Steve's engineering and operations experience includes generation, transmission, distribution, and electrical safety. He is an active senior member in IEEE and has published two books in power systems through IEEE and Wiley.
Download or read book IEEE Guide for Maintenance Operation and Safety of Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1998 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for the numerous personnel who are responsible for safety operating and maintaining industrial and commercial electric power facilities are provided. This guide provides plant engineers with a reference source for the fundamentals of safe and reliable maintenance and operation of industrial and commercial electric power distribution systems.
Download or read book Electrical Power Systems Quality written by Roger C. Dugan and published by McGraw Hill Professional. This book was released on 2002-12-17 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Basic power quality strategies and methods to protect electronic systems * Nearly twice the size of the last edition--new chapters on distributed generation and benchmarking--over 200 pages of new material
Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.
Download or read book Market Operations in Electric Power Systems written by Mohammad Shahidehpour and published by John Wiley & Sons. This book was released on 2003-05-28 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential overview of post-deregulation market operations inelectrical power systems Until recently the U.S. electricity industry was dominated byvertically integrated utilities. It is now evolving into adistributive and competitive market driven by market forces andincreased competition. With electricity amounting to a $200 billionper year market in the United States, the implications of thisrestructuring will naturally affect the rest of the world. Why is restructuring necessary? What are the components ofrestructuring? How is the new structure different from the oldmonopoly? How are the participants strategizing their options tomaximize their revenues? What are the market risks and how are theyevaluated? How are interchange transactions analyzed and approved?Starting with a background sketch of the industry, this hands-onreference provides insights into the new trends in power systemsoperation and control, and highlights advanced issues in thefield. Written for both technical and nontechnical professionals involvedin power engineering, finance, and marketing, this must-haveresource discusses: * Market structure and operation of electric power systems * Load and price forecasting and arbitrage * Price-based unit commitment and security constrained unitcommitment * Market power analysis and game theory applications * Ancillary services auction market design * Transmission pricing and congestion Using real-world case studies, this timely survey offers engineers,consultants, researchers, financial managers, university professorsand students, and other professionals in the industry acomprehensive review of electricity restructuring and how itsradical effects will shape the market.
Download or read book Electrical Power Systems Quality Third Edition written by Roger C. Dugan and published by McGraw Hill Professional. This book was released on 2012-02-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE GUIDE TO POWER QUALITY--UPDATED AND EXPANDED Electrical Power Systems Quality, Third Edition, is a complete, accessible, and up-to-date guide to identifying and preventing the causes of power quality problems. The information is presented without heavy-duty equations, making it practical and easily readable for utility engineers, industrial engineers, technicians, and equipment designers. This in-depth resource addresses the essentials of power quality and tested methods to improve compatibility among the power system, customer equipment, and processes. Coverage includes: Standard terms and definitions for power quality phenomena Protecting against voltage sags and interruptions Harmonic phenomena and dealing with harmonic distortion Transient overvoltages Long-duration voltage variations Benchmarking power quality International Electrotechnical Commission (IEC) and Institute of Electrical and Electronics Engineers (IEEE) standards Maintaining power quality in distributed generation systems Common wiring and grounding problems, along with solutions Site surveys and power quality monitoring
Download or read book Industrial Power Systems written by Shoaib Khan and published by CRC Press. This book was released on 2018-10-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modernization of industrial power systems has been stifled by industry's acceptance of extremely outdated practices. Industry is hesitant to depart from power system design practices influenced by the economic concerns and technology of the post World War II period. In order to break free of outdated techniques and ensure product quality and continuity of operations, engineers must apply novel techniques to plan, design, and implement electrical power systems. Based on the author's 40 years of experience in Industry, Industrial Power Systems illustrates the importance of reliable power systems and provides engineers the tools to plan, design, and implement one. Using materials from IEEE courses developed for practicing engineers, the book covers relevant engineering features and modern design procedures, including power system studies, grounding, instrument transformers, and medium-voltage motors. The author provides a number of practical tables, including IEEE and European standards, and design principles for industrial applications. Long overdue, Industrial Power Systems provides power engineers with a blueprint for designing electrical systems that will provide continuously available electric power at the quality and quantity needed to maintain operations and standards of production.
Download or read book Short Circuits in AC and DC Systems written by J. C. Das and published by CRC Press. This book was released on 2017-10-24 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an understanding of the nature of short-circuit currents, current interruption theories, circuit breaker types, calculations according to ANSI/IEEE and IEC standards, theoretical and practical basis of short-circuit current sources, and the rating structure of switching devices. The book aims to explain the nature of short-circuit currents, the symmetrical components for unsymmetrical faults, and matrix methods of solutions, which are invariably used on digital computers. It includes innovations, worked examples, case studies, and solved problems.
Download or read book 802 1aq Shortest Path Bridging Design and Evolution written by David Allan and published by John Wiley & Sons. This book was released on 2012-03-13 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Facilitates both the understanding and adoption of 802.1aq as a networking solution 802.1aq Shortest Path Bridging (SPB) is a technology that greatly simplifies the creation and configuration of carrier, enterprise, and cloud computing networks—by using modern computing power to deprecate signaling, and to integrate multicast, multipath routing, and large-scale virtualization. It is arguably one of the most significant enhancements in Ethernet's history. 802.1aq Shortest Path Bridging Design and Evolution explains both the "what" and the "why" of the technology standard being set today. It covers which decisions were elective and which were dictated by the design goals by using a multipart approach that first explains what SPB is, before transitioning into narrative form to describe the design processes and decisions behind it. To make SPB accessible to the data networking professional from multiple perspectives, the book: Provides a "Reader's Companion" to the standard Dissects the different elements of SPB Offers applications and potential futures for the technology 802.1aq Shortest Path Bridging Design and Evolution will appeal to system implementers, system and network architects, academics, IT professionals, and general networking professionals.
Download or read book Signal Processing of Power Quality Disturbances written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2006-08-04 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between power quality and signal processing This innovative new text brings together two leading experts, one from signal processing and the other from power quality. Combining their fields of expertise, they set forth and investigate various types of power quality disturbances, how measurements of these disturbances are processed and interpreted, and, finally, the use and interpretation of power quality standards documents. As a practical aid to readers, the authors make a clear distinction between two types of power quality disturbances: * Variations: disturbances that are continuously present * Events: disturbances that occur occasionally A complete analysis and full set of tools are provided for each type of disturbance: * Detailed examination of the origin of the disturbance * Signal processing measurement techniques, including advanced techniques and those techniques set forth in standards documents * Interpretation and analysis of measurement data * Methods for further processing the features extracted from the signal processing into site and system indices The depth of coverage is outstanding: the authors present and analyze material that is not covered in the standards nor found in the scientific literature. This text is intended for two groups of readers: students and researchers in power engineering who need to use signal processing techniques for power system applications, and students and researchers in signal processing who need to perform power system disturbance analyses and diagnostics. It is also highly recommended for any engineer or utility professional involved in power quality monitoring.
