Download or read book IEEE Standard for Wireless LAN Medium Access Control MAC and Physical Layer PHY Specifications written by IEEE Computer Society. LAN/MAN Standards Committee.. and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1997 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE 802 Wireless Systems written by Bernhard H. Walke and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the next decade, 802 wireless systems will become an integral part of fourth generation (4G) cellular communication systems, where the convergence of wireless and cellular networks will materialize through support of interworking and seamless roaming across dissimilar wireless and cellular radio access technologies. IEEE 802 Wireless Systems clearly describes the leading systems, covering IEEE 802.11 WLAN, IEEE 802.15 WPAN, IEEE 802.16 WMAN systems’ architecture, standards and protocols (including mesh) with an instructive approach allowing individuals unfamiliar with wireless systems to follow and understand these technologies. Ranging from digital radio transmission fundamentals, duplex, multiplexing and switching to medium access control, radio spectrum regulation, coexistence and spectrum sharing, this book also offers new solutions to broadband multi-hop networking for cellular and ad hoc operation. The book Gives a comprehensive overview and performance evaluation of IEEE 802.11, 802.15 and 802.16 Includes a tutorial like introduction to the basics of wireless communication Discusses challenges in mesh/multi-hop relaying networks and provides profound solutions for their realization with 802 Wireless Systems Covers spectrum sharing on different levels and provides solutions for coexistence, cooperation and interworking of 802 Wireless Systems that are following the same or different standards, but share the same spectrum Includes a detailed overview and introduction on cognitive radio and dynamic spectrum access Accompanying website contains simulation software and provides slides of the figures and tables from the book ready for course presentation This book is an essential text for advanced undergraduate students with a basic working knowledge of wireless communication, graduate students and engineers working in the field of wireless communications.

Download or read book Introduction to Computer Networks and Cybersecurity written by Chwan-Hwa (John) Wu and published by CRC Press. This book was released on 2016-04-19 with total page 1960 pages. Available in PDF, EPUB and Kindle. Book excerpt: If a network is not secure, how valuable is it? Introduction to Computer Networks and Cybersecurity takes an integrated approach to networking and cybersecurity, highlighting the interconnections so that you quickly understand the complex design issues in modern networks. This full-color book uses a wealth of examples and illustrations to effective

Download or read book Ultra Low Energy Wireless Sensor Networks in Practice written by Mauri Kuorilehto and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finally a book on Wireless Sensor Networks that covers real world applications and contains practical advice! Kuorilehto et al. have written the first practical guide to wireless sensor networks. The authors draw on their experience in the development and field-testing of autonomous wireless sensor networks (WSNs) to offer a comprehensive reference on fundamentals, practical matters, limitations and solutions of this fast moving research area. Ultra Low Energy Wireless Sensor Networks in Practice: Explains the essential problems and issues in real wireless sensor networks, and analyzes the most promising solutions. Provides a comprehensive guide to applications, functionality, protocols, and algorithms for WSNs. Offers practical experiences from new applications and their field-testing, including several deployed networks. Includes simulations and physical measurements for energy consumption, bit rate, latency, memory, and lifetime. Covers embedded resource-limited operating systems, middleware and application software. Ultra Low Energy Wireless Sensor Networks in Practice will prove essential reading for Research Scientists, advanced students in Networking, Electrical Engineering and Computer Science as well as Product Managers and Design Engineers.

Download or read book Guidelines for Safe Automation of Chemical Processes written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2017-01-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides designers and operators of chemical process facilities with a general philosophy and approach to safe automation, including independent layers of safety. An expanded edition, this book includes a revision of original concepts as well as chapters that address new topics such as use of wireless automation and Safety Instrumented Systems. This book also provides an extensive bibliography to related publications and topic-specific information.

Download or read book Cable and Wireless Networks written by Mário Marques da Silva and published by CRC Press. This book was released on 2018-09-03 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cable and Wireless Networks: Theory and Practice presents a comprehensive approach to networking, cable and wireless communications, and networking security. It describes the most important state-of-the-art fundamentals and system details in the field, as well as many key aspects concerning the development and understanding of current and emergent services. In this book, the author gathers in a single volume current and emergent cable and wireless network services and technologies. Unlike other books, which cover each one of these topics independently without establishing their natural relationships, this book allows students to quickly learn and improve their mastering of the covered topics with a deeper understanding of their interconnection. It also collects in a single source the latest developments in the area, typically only within reach of an active researcher. Each chapter illustrates the theory of cable and wireless communications with relevant examples, hands-on exercises, and review questions suitable for readers with a BSc degree or an MSc degree in computer science or electrical engineering. This approach makes the book well suited for higher education students in courses such as networking, telecommunications, mobile communications, and network security. This is an excellent reference book for academic, institutional, and industrial professionals with technical responsibilities in planning, design and development of networks, telecommunications and security systems, and mobile communications, as well as for Cisco CCNA and CCNP exam preparation.

Download or read book Unified IP Internetworking written by Dhiman D. Chowdhury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified IP Internetworking is the best resource for building intranet and enterprise networks today. Using the newly revived Internet Protocol (IP) design, dynamic bandwidth allocation, traffic class identification, service level agreement, multiservice transport and quality of service are now all possible. This book examines the power and flexibility of the IP in meeting these and future challenges while providing step by step explanations and testing techniques for building a network.

Download or read book Reliable Communications for Short Range Wireless Systems written by Ismail Guvenc and published by Cambridge University Press. This book was released on 2011-03-24 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ensuring reliable communication is an important concern in short-range wireless communication systems with stringent quality of service requirements. Key characteristics of these systems, including data rate, communication range, channel profiles, network topologies and power efficiency, are very different from those in long-range systems. This comprehensive book classifies short-range wireless technologies as high and low data rate systems. It addresses major factors affecting reliability at different layers of the protocol stack, detailing the best ways to enhance the capacity and performance of short-range wireless systems. Particular emphasis is placed on reliable channel estimation, state-of-the-art interference mitigation techniques and cooperative communications for improved reliability. The book also provides detailed coverage of related international standards including UWB, ZigBee, and 60 GHz communications. With a balanced treatment of theoretical and practical aspects of short-range wireless communications and with a focus on reliability, this is an ideal resource for practitioners and researchers in wireless communications.

Download or read book 5G Mobile Communications written by Saad Asif and published by CRC Press. This book was released on 2018-07-20 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will help readers comprehend technical and policy elements of telecommunication particularly in the context of 5G. It first presents an overview of the current research and standardization practices and lays down the global frequency spectrum allocation process. It further lists solutions to accommodate 5G spectrum requirements. The readers will find a considerable amount of information on 4G (LTE-Advanced), LTE-Advance Pro, 5G NR (New Radio); transport network technologies, 5G NGC (Next Generation Core), OSS (Operations Support Systems), network deployment and end-to-end 5G network architecture. Some details on multiple network elements (end products) such as 5G base station/small cells and the role of semiconductors in telecommunication are also provided. Keeping trends in mind, service delivery mechanisms along with state-of-the-art services such as MFS (mobile financial services), mHealth (mobile health) and IoT (Internet-of-Things) are covered at length. At the end, telecom sector’s burning challenges and best practices are explained which may be looked into for today’s and tomorrow’s networks. The book concludes with certain high level suggestions for the growth of telecommunication, particularly on the importance of basic research, departure from ten-year evolution cycle and having a 20–30 year plan. Explains the conceivable six phases of mobile telecommunication’s ecosystem that includes R&D, standardization, product/network/device & application development, and burning challenges and best practices Provides an overview of research and standardization on 5G Discusses solutions to address 5G spectrum requirements while describing the global frequency spectrum allocation process Presents various case studies and policies Provides details on multiple network elements and the role of semiconductors in telecommunication Presents service delivery mechanisms with special focus on IoT

Download or read book Positioning in Wireless Communications Systems written by Stephan Sand and published by John Wiley & Sons. This book was released on 2014-02-18 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Positioning in Wireless Communications Systems explains the principal differences and similarities of wireless communications systems and navigation systems. It discusses scenarios which are critical for dedicated navigation systems such as the Global Positioning System (GPS) and which motivate the use of positioning based on terrestrial wireless communication systems. The book introduces approaches for determination of parameters which are dependent on the position of the mobile terminal and also discusses iterative algorithms to estimate and track the position of the mobile terminal. Models for radio propagation and user mobility are important for performance investigations and assessments using computer simulations. Thus, channel and mobility models are explored, especially focussing on critical navigation environments like urban or indoor scenarios. Positioning in Wireless Communications Systems examines advanced algorithms such as hybrid data fusion of satellite navigation and positioning with wireless communications and cooperative positioning among mobile terminals.. The performance of the discussed positioning techniques are explored on the basis of already existing and operable terrestrial wireless communication systems such as GSM, UMTS, or LTE and it is shown how positioning issues are fixed in respective standards. Written by industry experts working at the cutting edge of technological development, the authors are well placed to give an excellent view on this topic, enabling in-depth coverage of current developments. Key features • Unique in its approach to dealing with a heterogeneous system approach, different cell structures and signal proposals for future communications systems • Covers hybrid positioning investigating how GNSS and wireless communications positioning complement each other • Applications and exploitation of positioning information are discussed to show the benefits of including this information in several parts of a wireless communications system

Download or read book Body Sensor Networks written by Guang-Zhong Yang and published by Springer Science & Business Media. This book was released on 2007-12-05 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the issues of the rapidly changing field of wireless wearable and implantable sensors. It also discusses the latest technological developments and clinical applications of body-sensor networks (BSN). BSN is a new area of research and the last decade has seen a rapid surge of interest. The book also provides a review of current wireless sensor development platforms and a guide to developing your own BSN applications.

Download or read book Managing Traffic Performance in Converged Networks written by Lorne Mason and published by Springer. This book was released on 2007-09-04 with total page 1213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Teletraffic Congress, ITC 2007, held in Ottawa, Canada, June 2007. Coverage includes IPTV planning and modeling, network performance, traffic engineering, end-to-end delay in converged networks, queuing models, impact of convergence and divergence forces on network performance, traffic management in wireless networks, and network design for capacity and performance.

Download or read book OFDM Based Broadband Wireless Networks written by Hui Liu and published by John Wiley & Sons. This book was released on 2005-11-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: OFDM-based Broadband Wireless Networks covers the latest technological advances in digital broadcasting, wireless LAN, and mobile networks to achieve high spectral efficiency, and to meet peak requirements for multimedia traffic. The book emphasizes the OFDM modem, air-interface, medium access-control (MAC), radio link protocols, and radio network planning. An Instructor Support FTP site is available from the Wiley editorial department.

Download or read book Mobile Wireless Communications written by Mischa Schwartz and published by Cambridge University Press. This book was released on 2005 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book LAN Technologies Explained written by Philip Miller and published by Digital Press. This book was released on 2000 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to offer a comprehensive and easy-to-read turtorial. It describes the protocols, techniques, products and concepts that enable an organization's computer and data networks to carry ever-greater volumes of data at ever greater speeds. This book guides readers from legacy access methods such as Ethernet and Token Ring through the high-bandwidth technologies and concepts accessible to both new and experienced professionals.

Download or read book Wireless Security and Cryptography written by Nicolas Sklavos and published by CRC Press. This book was released on 2017-12-19 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the use of wireless devices becomes widespread, so does the need for strong and secure transport protocols. Even with this intensified need for securing systems, using cryptography does not seem to be a viable solution due to difficulties in implementation. The security layers of many wireless protocols use outdated encryption algorithms, which have proven unsuitable for hardware usage, particularly with handheld devices. Summarizing key issues involved in achieving desirable performance in security implementations, Wireless Security and Cryptography: Specifications and Implementations focuses on alternative integration approaches for wireless communication security. It gives an overview of the current security layer of wireless protocols and presents the performance characteristics of implementations in both software and hardware. This resource also presents efficient and novel methods to execute security schemes in wireless protocols with high performance. It provides the state of the art research trends in implementations of wireless protocol security for current and future wireless communications. Unique in its coverage of specification and implementation concerns that include hardware design techniques, Wireless Security and Cryptography: Specifications and Implementations provides thorough coverage of wireless network security and recent research directions in the field.

Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems