Download or read book IEEE Standards written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Recommended Practice for Maintenance Testing and Replacement of Vented Lead acid Batteries for Stationary Applications written by and published by . This book was released on 2003 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Recommended Practice for Maintenance Testing and Replacement of Vented Lead acid Batteries for Stationary Applications written by IEEE and published by Inst of Elect & Electronic. This book was released on 1995 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead-acid storage batteries used for standby power applications are provided. This recommended practice also provides guidance to determine when batteries should be replaced. This recommended practice is applicable to all stationary applications. However, specific applications, such as emergency lighting units and semiportable equipment, may have other appropriate practices and are beyond the scope of this recommended practice.

Download or read book Electrical Power Equipment Maintenance and Testing written by Paul Gill and published by CRC Press. This book was released on 2016-12-19 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this definitive text covers all aspects of testing and maintenance of the equipment found in electrical power systems serving industrial, commercial, utility substations, and generating plants. It addresses practical aspects of routing testing and maintenance and presents both the methodologies and engineering basics needed to carry out these tasks. It is an essential reference for engineers and technicians responsible for the operation, maintenance, and testing of power system equipment. Comprehensive coverage includes dielectric theory, dissolved gas analysis, cable fault locating, ground resistance measurements, and power factor, dissipation factor, DC, breaker, and relay testing methods.

Download or read book Industrial Power Systems written by Shoaib Khan and published by CRC Press. This book was released on 2018-10-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modernization of industrial power systems has been stifled by industry's acceptance of extremely outdated practices. Industry is hesitant to depart from power system design practices influenced by the economic concerns and technology of the post World War II period. In order to break free of outdated techniques and ensure product quality and continuity of operations, engineers must apply novel techniques to plan, design, and implement electrical power systems. Based on the author's 40 years of experience in Industry, Industrial Power Systems illustrates the importance of reliable power systems and provides engineers the tools to plan, design, and implement one. Using materials from IEEE courses developed for practicing engineers, the book covers relevant engineering features and modern design procedures, including power system studies, grounding, instrument transformers, and medium-voltage motors. The author provides a number of practical tables, including IEEE and European standards, and design principles for industrial applications. Long overdue, Industrial Power Systems provides power engineers with a blueprint for designing electrical systems that will provide continuously available electric power at the quality and quantity needed to maintain operations and standards of production.

Download or read book Fundamentals of Electrical Design Course Module 14 written by and published by Integrity Institute of Tech. This book was released on with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book DC Power System Design for Telecommunications written by Whitham D. Reeve and published by John Wiley & Sons. This book was released on 2006-10-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Straightforward, systematic approach for designing reliable dc power systems for telecommunications Here is a must-have resource for anyone responsible for designing, installing, and maintaining telecommunications systems. The text explains how to design direct current (dc) power systems that operate at nominal voltages of 24 and 48 volts dc, use lead-acid batteries, and are installed in public network telecommunications systems and other exclusive-use environments. Rather than train readers to design systems by rote, the author gives readers the skills and knowledge to perform systematic analyses to make the best choices based on several economic, operational, electrical, and physical considerations. Written in a straightforward style that avoids unnecessary jargon and complex mathematics, the text covers all the essentials of dc power systems for telecommunications: * Detailed descriptions of the seven major system components: Rectifier/charger System, Battery System, Charge Bus, Discharge Bus, Primary Distribution System, Secondary Distribution System, and Voltage Conversion System * Detailed descriptions include design equations, reference tables, block diagrams, and schematics * Design procedures to help readers select the most appropriate power system elements, such as buses, wiring, overcurrent protection, rectifiers, and batteries * Application of the American National Standards Institute's telecommunications industry standards and other relevant standards, practices, and codes * Strategies for dealing with voltage drop in distribution and battery circuits as well as guidance for sizing circuit wiring to meet voltage drop and current rating requirements * In-depth discussions that focus on the types of lead-acid batteries used in telecommunications and their applications Throughout the text, examples demonstrate how theory is applied to real-world telecommunications systems. Some 330 illustrations and more than 100 tables are also provided to help readers visualize and better understand complex systems. Design and application examples and accompanying solutions help readers understand the design process and use their new skills. In summary, engineers and technicians in the telecommunications industry will find all the resources they need to design reliable dc power systems.

Download or read book Proceedings of the Symposium on Batteries for Portable Applications and Electric Vehicles written by Electrochemical Society. Battery Division and published by The Electrochemical Society. This book was released on 1997 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman's explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. - Adds a brief history of battery technology and its evolution to current technologies? - Expands and updates the chemistry to include the latest types - Discusses thermal runaway and cascading failure mitigation technologies? - Expands and updates the descriptions of the battery module and pack components and systems?? - Adds description of the manufacturing processes for cells, modules, and packs? - Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?

Download or read book Electrical Design Fundamentals written by and published by Integrity Institute of Tech. This book was released on with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Electrical Substations and Switchgear Safety for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-05-01 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for electrical engineers and construction managers interested in electric power distribution. Here is what is discussed: 1. SUBSTATION WORK, 2. SWITCHING, 3. FUSES, 4. ENERGY STORING PROTECTIVE DEVICES, 5. INSTRUMENT TRANSFORMER6, 6. POWER TRANSFORMERS AND REGULATORS, 7. METALCLAD SWITCHGEAR, 8. STATIONARY BATTERIES, 9. INSULATING OIL HANDLING OPERATIONS.

Download or read book Handbook on Production Recycling of Lithium Ion and Lead Acid Batteries with Manufacturing Process Machinery Equipment Details Plant Layout written by P.K. Tripathi and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2022-04-25 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: India is one of the world's largest battery manufacturers. Furthermore, there is an increase in global demand for batteries, and Indian battery producers are preparing to satisfy this need. The Indian battery sector has grown by 25% year over year and is expected to increase even more in the future. Batteries, such as Sealed Maintenance Free (SMF), lead-acid, or lithium-ion batteries, now power virtually everything else on the world. The global battery market was worth USD 108.4 billion and is predicted to increase at a CAGR of 14.1%. The increasing demand from the automotive application is responsible for the market's rise. Rechargeable batteries are utilised in non-rechargeable batteries and electric vehicles in the automobile industry. The rising global popularity of consumer electronics is expected to increase the use of lithium-ion batteries as a product category. Portable electronics, such as LCD displays, smartphones, tablets, and wearable devices like fitness bands, are in high demand, increasing market growth. Because of technical developments in terms of increased efficiency, cost-effectiveness, and product innovation, the market is predicted to rise significantly. Battery demand is likely to be driven by strict emission requirements imposed by government agencies in industrialized countries such as the United States and the United Kingdom, as well as an increasing focus on fuel efficiency. The demand for lithium-ion batteries is predicted to increase by more than 500 percent in the future. Many predictions suggest that demand will outpace supply, virtually assuring a price increase. All of the businesses in this field have unique opportunities to invest in the future of energy storage and transportation. The global lithium-ion battery market size was valued at USD 53.6 billion and is expected to grow at a compound annual growth rate (CAGR) of 19.0%. The market's expansion can be ascribed to the rising demand for lithium-ion batteries in electric vehicles (EVs) and grid storage, since they provide high-energy density and lightweight solutions. The market size is expected to grow due to an increase in the registration of electric vehicles. The global lead–acid battery industry is growing significantly across the globe and it is likely to register a CAGR of 5.2% during the forecast period. Growing SLI applications in the automobile sector, increase in renewable energy output, and rising demand for energy storage devices are some of the causes driving up demand for lead–acid batteries. As the telecom industry expands in nations like the United States, Brazil, India, and the United Kingdom, there is a growing demand for UPS systems as a backup power source, resulting in a higher usage of lead–acid batteries as a cost-effective energy source. The book covers a wide range of topics connected to Batteries, as well as their manufacturing processes. It also includes contact information for machinery suppliers, as well as images of equipments. A complete guide on Production, Recycling of Lithium Ion and Lead-Acid Batteries manufacture and entrepreneurship. This book serves as a one-stop shop for everything you need to know about the Battery manufacturing industry, which is ripe with opportunity for manufacturers, merchants, and entrepreneurs. This is the only book that covers Production, Recycling of Lithium Ion and Lead-Acid Batteries in depth. From concept through equipment procurement, it is a veritable feast of how-to information.

Download or read book Federal Register written by and published by . This book was released on 2013-03 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Recommended Practice for Maintenance Testing and Replacement of Vented Lead acid Batteries for Stationary Applications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1995 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of permanently installed, vented lead-acid storage batteries used for standby power applications are provided. This recommended practice also provides guidance to determine when batteries should be replaced. This recommended practice is applicable to all stationary applications. However, specific applications, such as emergency lighting units and semiportable equipment, may have other appropriate practices and are beyond the scope of this recommended practice.

Download or read book Introduction to Maintenance Engineering written by Mohamed Ben-Daya and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook links theory with practice using real illustrative cases involving products, plants and infrastructures and exposes the student to the evolutionary trends in maintenance. Provides an interdisciplinary approach which links, engineering, science, technology, mathematical modelling, data collection and analysis, economics and management Blends theory with practice illustrated through examples relating to products, plants and infrastructures Focuses on concepts, tools and techniques Identifies the special management requirements of various engineered objects (products, plants, and infrastructures)

Download or read book Encyclopedia of Electrochemical Power Sources written by and published by Elsevier. This book was released on 2024-09-16 with total page 5674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Electrochemical Power Sources, Second Edition, is a comprehensive seven-volume set that serves as a vital interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. With an increased focus on the environmental and economic impacts of electrochemical power sources, this work not only consolidates extensive coverage of the field but also serves as a gateway to the latest literature for professionals and students alike. The field of electrochemical power sources has experienced significant growth and development since the first edition was published in 2009. This is reflected in the exponential growth of the battery market, the improvement of many conventional systems, and the introduction of new systems and technologies. This completely revised second edition captures these advancements, providing updates on all scientific, technical, and economic developments over the past decade. Thematically arranged, this edition delves into crucial areas such as batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. It explores challenges and advancements in electrode and electrolyte materials, structural design, optimization, application of novel materials, and performance analysis. This comprehensive resource, with its focus on the future of electrochemical power sources, is an essential tool for navigating this rapidly evolving field. - Covers the main types of power sources, including their operating principles, systems, materials, and applications - Serves as a primary source of information for electrochemists, materials scientists, energy technologists, and engineers - Incorporates 365 articles, with timely coverage of environmental and sustainability aspects - Arranged thematically to facilitate easy navigation of topics and easy exploration of the field across its key branches - Follows a consistent structure and features elements such as key objective boxes, summaries, figures, references, and cross-references etc., to help students, faculty, and professionals alike

Download or read book Over 200 U S Department of Energy Manuals Combined CLASSICAL PHYSICS ELECTRICAL SCIENCE THERMODYNAMICS HEAT TRANSFER AND FLUID FUNDAMENTALS INSTRUMENTATION AND CONTROL MATHEMATICS CHEMISTRY ENGINEERING SYMBIOLOGY MATERIAL SCIENCE MECHANICAL SCIENCE AND NUCLEAR PHYSICS AND REACTOR THEORY written by and published by Jeffrey Frank Jones. This book was released on with total page 19288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 19,000 total pages ... Public Domain U.S. Government published manual: Numerous illustrations and matrices. Published in the 1990s and after 2000. TITLES and CONTENTS: ELECTRICAL SCIENCES - Contains the following manuals: Electrical Science, Vol 1 - Electrical Science, Vol 2 - Electrical Science, Vol 3 - Electrical Science, Vol 4 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 1 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 2 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 3 - Instrumentation And Control, Vol 1 - Instrumentation And Control, Vol 2 Mathematics, Vol 1 - Mathematics, Vol 2 - Chemistry, Vol 1 - Chemistry, Vol 2 - Engineering Symbology, Prints, And Drawings, Vol 1 - Engineering Symbology, Prints, And Drawings, Vol 2 - Material Science, Vol 1 - Material Science, Vol 2 - Mechanical Science, Vol 1 - Mechanical Science, Vol 2 - Nuclear Physics And Reactor Theory, Vol 1 - Nuclear Physics And Reactor Theory, Vol 2. CLASSICAL PHYSICS - The Classical Physics Fundamentals includes information on the units used to measure physical properties; vectors, and how they are used to show the net effect of various forces; Newton's Laws of motion, and how to use these laws in force and motion applications; and the concepts of energy, work, and power, and how to measure and calculate the energy involved in various applications. * Scalar And Vector Quantities * Vector Identification * Vectors: Resultants And Components * Graphic Method Of Vector Addition * Component Addition Method * Analytical Method Of Vector Addition * Newton's Laws Of Motion * Momentum Principles * Force And Weight * Free-Body Diagrams * Force Equilibrium * Types Of Force * Energy And Work * Law Of Conservation Of Energy * Power – ELECTRICAL SCIENCE: The Electrical Science Fundamentals Handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. * Atom And Its Forces * Electrical Terminology * Units Of Electrical Measurement * Methods Of Producing Voltage (Electricity) * Magnetism * Magnetic Circuits * Electrical Symbols * DC Sources * DC Circuit Terminology * Basic DC Circuit Calculations * Voltage Polarity And Current Direction * Kirchhoff's Laws * DC Circuit Analysis * DC Circuit Faults * Inductance * Capacitance * Battery Terminology * Battery Theory * Battery Operations * Types Of Batteries * Battery Hazards * DC Equipment Terminology * DC Equipment Construction * DC Generator Theory * DC Generator Construction * DC Motor Theory * Types Of DC Motors * DC Motor Operation * AC Generation * AC Generation Analysis * Inductance * Capacitance * Impedance * Resonance * Power Triangle * Three-Phase Circuits * AC Generator Components * AC Generator Theory * AC Generator Operation * Voltage Regulators * AC Motor Theory * AC Motor Types * Transformer Theory * Transformer Types * Meter Movements * Voltmeters * Ammeters * Ohm Meters * Wattmeters * Other Electrical Measuring Devices * Test Equipment * System Components And Protection Devices * Circuit Breakers * Motor Controllers * Wiring Schemes And Grounding THERMODYNAMICS, HEAT TRANSFER AND FLUID FUNDAMENTALS. The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. * Thermodynamic Properties * Temperature And Pressure Measurements * Energy, Work, And Heat * Thermodynamic Systems And Processes * Change Of Phase * Property Diagrams And Steam Tables * First Law Of Thermodynamics * Second Law Of Thermodynamics * Compression Processes * Heat Transfer Terminology * Conduction Heat Transfer * Convection Heat Transfer * Radiant Heat Transfer * Heat Exchangers * Boiling Heat Transfer * Heat Generation * Decay Heat * Continuity Equation * Laminar And Turbulent Flow * Bernoulli's Equation * Head Loss * Natural Circulation * Two-Phase Fluid Flow * Centrifugal Pumps INSTRUMENTATION AND CONTROL. The Instrumentation and Control Fundamentals Handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. * Resistance Temperature Detectors (Rtds) * Thermocouples * Functional Uses Of Temperature Detectors * Temperature Detection Circuitry * Pressure Detectors * Pressure Detector Functional Uses * Pressure Detection Circuitry * Level Detectors * Density Compensation * Level Detection Circuitry * Head Flow Meters * Other Flow Meters * Steam Flow Detection * Flow Circuitry * Synchro Equipment * Switches * Variable Output Devices * Position Indication Circuitry * Radiation Detection Terminology * Radiation Types * Gas-Filled Detector * Detector Voltage * Proportional Counter * Proportional Counter Circuitry * Ionization Chamber * Compensated Ion Chamber * Electroscope Ionization Chamber * Geiger-Müller Detector * Scintillation Counter * Gamma Spectroscopy * Miscellaneous Detectors * Circuitry And Circuit Elements * Source Range Nuclear Instrumentation * Intermediate Range Nuclear Instrumentation * Power Range Nuclear Instrumentation * Principles Of Control Systems * Control Loop Diagrams * Two Position Control Systems * Proportional Control Systems * Reset (Integral) Control Systems * Proportional Plus Reset Control Systems * Proportional Plus Rate Control Systems * Proportional-Integral-Derivative Control Systems * Controllers * Valve Actuators MATHEMATICS The Mathematics Fundamentals Handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. * Calculator Operations * Four Basic Arithmetic Operations * Averages * Fractions * Decimals * Signed Numbers * Significant Digits * Percentages * Exponents * Scientific Notation * Radicals * Algebraic Laws * Linear Equations * Quadratic Equations * Simultaneous Equations * Word Problems * Graphing * Slopes * Interpolation And Extrapolation * Basic Concepts Of Geometry * Shapes And Figures Of Plane Geometry * Solid Geometric Figures * Pythagorean Theorem * Trigonometric Functions * Radians * Statistics * Imaginary And Complex Numbers * Matrices And Determinants * Calculus CHEMISTRY The Chemistry Handbook includes information on the atomic structure of matter; chemical bonding; chemical equations; chemical interactions involved with corrosion processes; water chemistry control, including the principles of water treatment; the hazards of chemicals and gases, and basic gaseous diffusion processes. * Characteristics Of Atoms * The Periodic Table * Chemical Bonding * Chemical Equations * Acids, Bases, Salts, And Ph * Converters * Corrosion Theory * General Corrosion * Crud And Galvanic Corrosion * Specialized Corrosion * Effects Of Radiation On Water Chemistry (Synthesis) * Chemistry Parameters * Purpose Of Water Treatment * Water Treatment Processes * Dissolved Gases, Suspended Solids, And Ph Control * Water Purity * Corrosives (Acids And Alkalies) * Toxic Compound * Compressed Gases * Flammable And Combustible Liquids ENGINEERING SYMBIOLOGY. The Engineering Symbology, Prints, and Drawings Handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. * Introduction To Print Reading * Introduction To The Types Of Drawings, Views, And Perspectives * Engineering Fluids Diagrams And Prints * Reading Engineering P&Ids * P&Id Print Reading Example * Fluid Power P&Ids * Electrical Diagrams And Schematics * Electrical Wiring And Schematic Diagram Reading Examples * Electronic Diagrams And Schematics * Examples * Engineering Logic Diagrams * Truth Tables And Exercises * Engineering Fabrication, Construction, And Architectural Drawings * Engineering Fabrication, Construction, And Architectural Drawing, Examples MATERIAL SCIENCE. The Material Science Handbook includes information on the structure and properties of metals, stress mechanisms in metals, failure modes, and the characteristics of metals that are commonly used in DOE nuclear facilities. * Bonding * Common Lattice Types * Grain Structure And Boundary * Polymorphism * Alloys * Imperfections In Metals * Stress * Strain * Young's Modulus * Stress-Strain Relationship * Physical Properties * Working Of Metals * Corrosion * Hydrogen Embrittlement * Tritium/Material Compatibility * Thermal Stress * Pressurized Thermal Shock * Brittle Fracture Mechanism * Minimum Pressurization-Temperature Curves * Heatup And Cooldown Rate Limits * Properties Considered * When Selecting Materials * Fuel Materials * Cladding And Reflectors * Control Materials * Shielding Materials * Nuclear Reactor Core Problems * Plant Material Problems * Atomic Displacement Due To Irradiation * Thermal And Displacement Spikes * Due To Irradiation * Effect Due To Neutron Capture * Radiation Effects In Organic Compounds * Reactor Use Of Aluminum MECHANICAL SCIENCE. The Mechanical Science Handbook includes information on diesel engines, heat exchangers, pumps, valves, and miscellaneous mechanical components. * Diesel Engines * Fundamentals Of The Diesel Cycle * Diesel Engine Speed, Fuel Controls, And Protection * Types Of Heat Exchangers * Heat Exchanger Applications * Centrifugal Pumps * Centrifugal Pump Operation * Positive Displacement Pumps * Valve Functions And Basic Parts * Types Of Valves * Valve Actuators * Air Compressors * Hydraulics * Boilers * Cooling Towers * Demineralizers * Pressurizers * Steam Traps * Filters And Strainers NUCLEAR PHYSICS AND REACTOR THEORY. The Nuclear Physics and Reactor Theory Handbook includes information on atomic and nuclear physics; neutron characteristics; reactor theory and nuclear parameters; and the theory of reactor operation. * Atomic Nature Of Matter * Chart Of The Nuclides * Mass Defect And Binding Energy * Modes Of Radioactive Decay * Radioactivity * Neutron Interactions * Nuclear Fission * Energy Release From Fission * Interaction Of Radiation With Matter * Neutron Sources * Nuclear Cross Sections And Neutron Flux * Reaction Rates * Neutron Moderation * Prompt And Delayed Neutrons * Neutron Flux Spectrum * Neutron Life Cycle * Reactivity * Reactivity Coefficients * Neutron Poisons * Xenon * Samarium And Other Fission Product Poisons * Control Rods * Subcritical Multiplication * Reactor Kinetics * Reactor