Download or read book Fault Analysis and Protection System Design for DC Grids written by Abhisek Ukil and published by Springer Nature. This book was released on 2020-04-13 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive reference guide to the important topics of fault analysis and protection system design for DC grids, at various voltage levels and for a range of applications. It bridges a much-needed research gap to enable wide-scale implementation of energy-efficient DC grids. Following an introduction, DC grid architecture is presented, covering the devices, operation and control methods. In turn, analytical methods for DC fault analysis are presented for different types of faults, followed by separate chapters on various DC fault identification methods, using time, frequency and time-frequency domain analyses of the DC current and voltage signals. The unit and non-unit protection strategies are discussed in detail, while a dedicated chapter addresses DC fault isolation devices. Step-by-step guidelines are provided for building hardware-based experimental test setups, as well as methods for validating the various algorithms. The book also features several application-driven case studies.
Download or read book National Electrical Code written by National Fire Protection Association and published by NationalFireProtectionAssoc. This book was released on 2007 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest electrical regulation code that is applicable for electrical wiring and equipment installation for all buildings, covering emergency situations, owner liability, and procedures for ensuring public and workplace safety.
Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book IEEE Design Guide for Electric Power Service Systems for Generating Stations written by American National Standards Institute and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1993-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]
Download or read book Electrical Safety Code Manual written by Kimberley Keller and published by Butterworth-Heinemann. This book was released on 2010-07-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures
Download or read book IEEE Guide for AC Motor Protection written by and published by . This book was released on 2000 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally accepted methods of protection for ac motors are provided. This guide identifies and summarizes the functions necessary for adequate protection of motors based on type, size, and application. This guide does not purport to detail the protective requirements if all motors in every situation.
Download or read book National Electrical Code 2011 Handbook written by National Fire Protection Association and published by Cengage Learning. This book was released on 2010-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "National Electrical Code 2011 Handbook" provides the full text of the updated code regulations alongside expert commentary from code specialists, offering code rationale, clarifications for new and updated rules, and practical, real-world advice on how to apply the code.
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
Download or read book Lightning Protection of Aircraft written by Franklin Fisher and published by CreateSpace. This book was released on 2012-07-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to present under one cover the current state of knowledge concerning the potential lightning effects on aircraft and that means that are available to designers and operators to protect against these effects. The impetus for writing this book springs from two sources- the increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation function.
Download or read book Transformers written by and published by Reclamation Bureau. This book was released on 2005 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: On cover: Reclamation, Managing Water in the West. Describes how transformers work, how they are maintained, and how to test and evaluate their condition.
Download or read book Lightning Protection Guide written by Dehn + Söhne (Neumarkt i.d. OPf.) and published by . This book was released on 2014 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Recommended Practice for Powering and Grounding Electronic Equipment written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grounding Bonding and Shielding for Electronic Equipments and Facilities written by Department of Department of Defense and published by . This book was released on 2018-03-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIL-HDBK-419A 29 DECEMBER 1987 Volume 2 of 2 Applications Unfortunately, few Military Handbooks address the need for defense against electromagnetic pulse (EMP) and cybersecurity. While EMP has been thought of as a remote possibility (who in his right mind is going to launch a nuclear weapon of any kind against the U.S.?) Advances in non-nuclear EMP, miniaturization of electronics and autonomous drones suddenly brings EMP into the role of the possible. No longer would an adversary need to risk retaliation when a drone from an unknown source attacks a vital facility. The information in this book is part of the solution to the question "How do we defend against EMP?" List of Applicable EMP and Cybersecurity Publications: MIL-STD-188-125-1 High-altitude electromagnetic pulse (HEMP) Protection For Ground-Based C4I Facilities Performing Critical, Time-Urgent Missions MIL-STD-188-124A Grounding, Bonding and Shielding for Common Long Haul/Tactical Communication Systems MIL-HDBK -1195 Radio Frequency Shielded Enclosures TOP 01-2-620 High-Altitude Electromagnetic Pulse (HEMP) Testing MIL-HDBK-1012/1 Electronic Facilities Engineering MIL-HDBK-1013/1A Design Guidelines for Physical Security of Facilities
Download or read book Lessons in Electric Circuits An Encyclopedic Text Reference Guide 6 Volumes Set written by Tony R. Kuphaldt and published by Koros Press. This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
