Download or read book Guide to the Software Engineering Body of Knowledge Swebok r written by IEEE Computer Society and published by . This book was released on 2014 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Guide to the Software Engineering Body of Knowledge (SWEBOK(R) Guide), the IEEE Computer Society establishes a baseline for the body of knowledge for the field of software engineering, and the work supports the Society's responsibility to promote the advancement of both theory and practice in this field. It should be noted that the Guide does not purport to define the body of knowledge but rather to serve as a compendium and guide to the knowledge that has been developing and evolving over the past four decades. Now in Version 3.0, the Guide's 15 knowledge areas summarize generally accepted topics and list references for detailed information. The editors for Version 3.0 of the SWEBOK(R) Guide are Pierre Bourque (Ecole de technologie superieure (ETS), Universite du Quebec) and Richard E. (Dick) Fairley (Software and Systems Engineering Associates (S2EA)).

Download or read book Guidelines for the Documentation of Computer Software for Real Time and Interactive Systems written by Institution of Electrical Engineers and published by . This book was released on 1990 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory Application and Implementation of Monte Carlo Method in Science and Technology written by Pooneh Saidi Bidokhti and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Monte Carlo method is a numerical technique to model the probability of all possible outcomes in a process that cannot easily be predicted due to the interference of random variables. It is a technique used to understand the impact of risk, uncertainty, and ambiguity in forecasting models. However, this technique is complicated by the amount of computer time required to achieve sufficient precision in the simulations and evaluate their accuracy. This book discusses the general principles of the Monte Carlo method with an emphasis on techniques to decrease simulation time and increase accuracy.

Download or read book IEEE Std 1220 1998 written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Army RD A written by and published by . This book was released on 1995 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Army RD A Bulletin written by and published by . This book was released on 1996-07 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Std 1364 2005 Revision of IEEE Std 1364 2001 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enterprise Patterns and MDA written by Jim Simon Plumtree and published by Addison-Wesley Professional. This book was released on 2003-12-22 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Patterns and MDA teaches you how to customize any archetype pattern–such as Customer, Product, and Order–to reflect the idiosyncrasies of your own business environment. Because all the patterns work harmoniously together and have clearly documented relationships to each other, you’ll come away with a host of reusable solutions to common problems in business-software design. This book shows you how using a pattern or a fragment of a pattern can save you months of work and help you avoid costly errors. You’ll also discover how–when used in literate modeling–patterns can solve the difficult challenge of communicating UML models to broad audiences. The configurable patterns can be used manually to create executable code. However, the authors draw on their extensive experience to show you how to tap the significant power of MDA and UML for maximum automation. Not surprisingly, the patterns included in this book are highly valuable; a blue-chip company recently valued a similar, but less mature, set of patterns at hundreds of thousands of dollars. Use this practical guide to increase the efficiency of your designs and to create robust business applications that can be applied immediately in a business setting.

Download or read book IEEE Recommended Practice for Software Requirements Specifications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content and qualities of a good software requirements specification (SRS) are described and several sample SRS outlines are presented. This recommended practice is aimed at specifying requirements of software to be developed but also can be applied to assist in the selection of in-house and commercial software products. Guidelines for compliance with IEEE/EIA 1207.1-1997 are also provided.

Download or read book Architecture Description Languages written by Pierre Dissaux and published by Springer Science & Business Media. This book was released on 2005-03-10 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architecture Description Languages is an essential reference for both academic and professional researchers in the field of system engineering and design. The papers presented in this volume were selected from the workshop of the same name that was held as part of the World Computer Congress 2004 Conference, held in Toulouse, France in August 2004. This collection presents significant research and innovative developments and applications from both academic researchers and industry practitioners on topics ranging from Semantics to Tool and Development Environments. The aim of an ADL is to formally describe software and hardware architectures. Usually, an ADL describes components, their interfaces, their structures, their interactions (structure of data flow and control flow) and the mappings to hardware systems. A major goal of such description is to allow analysis with respect to several aspects like timing, safety, reliability. The papers in this state-of-the-art volume cover such topics of interest as components, connectors, composition; semantics and formalization; verification, simulation and test; tools and development environments; standardization; industrial projects. To encourage closer interaction between academic and industrial networking research communities, the workshop welcomed academic research papers as well as industrial contributions, and both are included here. Which makes this collection important not only for ADL experts and researchers, but also for all teachers and administrators interested in ADL.

Download or read book An Introduction to the Description and Evaluation of Microwave Systems Using Terminal Invariant Parameters written by Glenn F. Engen and published by . This book was released on 1969 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Error Analysis written by Wendy W. Peng and published by Silicon Press. This book was released on 1994-10 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Information and Software Technologies written by Tomas Skersys and published by Springer. This book was released on 2013-11-13 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Information and Software Technologies, ICIST 2012, held in Kaunas, Lithuania, in September 2012. The 40 revised full papers presented were carefully reviewed and selected from 81 submissions. The papers are organized in topical sections on artificial intelligence and knowledge engineering, business process modelling, analysis and design, formal analysis and design methods, information and software systems engineering, information technology applications and computer networks, information technology in teaching and learning, ontology, conceptual modelling and databases, requirements engineering and business rules.

Download or read book Hagenberg Research written by Bruno Buchberger and published by Springer Science & Business Media. This book was released on 2009-05-29 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: BrunoBuchberger This book is a synopsis of basic and applied research done at the various re search institutions of the Softwarepark Hagenberg in Austria. Starting with 15 coworkers in my Research Institute for Symbolic Computation (RISC), I initiated the Softwarepark Hagenberg in 1987 on request of the Upper Aus trian Government with the objective of creating a scienti?c, technological, and economic impulse for the region and the international community. In the meantime, in a joint e?ort, the Softwarepark Hagenberg has grown to the current (2009) size of over 1000 R&D employees and 1300 students in six research institutions, 40 companies and 20 academic study programs on the bachelor, master’s and PhD level. The goal of the Softwarepark Hagenberg is innovation of economy in one of the most important current technologies: software. It is the message of this book that this can only be achieved and guaranteed long term by “watering the root”, namely emphasis on research, both basic and applied. In this book, we summarize what has been achieved in terms of research in the various research institutions in the Softwarepark Hagenberg and what research vision we have for the imminent future. When I founded the Softwarepark Hagenberg, in addition to the “watering the root” principle, I had the vision that such a technology park can only prosper if we realize the “magic triangle”, i.e. the close interaction of research, academic education, and business applications at one site, see Figure 1.

Download or read book Guide to the Software Engineering Body of Knowledge written by Alain Abran and published by IEEE Computer Society Press. This book was released on 2004 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the Guide to the Software Engineering Body of Knowledge is to provide a validated classification of the bounds of the software engineering discipline and topical access that will support this discipline. The Body of Knowledge is subdivided into ten software engineering Knowledge Areas (KA) that differentiate among the various important concepts, allowing readers to find their way quickly to subjects of interest. Upon finding a subject, readers are referred to key papers or book chapters. Emphases on engineering practice lead the Guide toward a strong relationship with the normative literature. The normative literature is validated by consensus formed among practitioners and is concentrated in standards and related documents. The two major standards bodies for software engineering (IEEE Computer Society Software and Systems Engineering Standards Committee and ISO/IEC JTC1/SC7) are represented in the project.

Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.

Download or read book The Art of Systems Architecting written by Mark W. Maier and published by CRC Press. This book was released on 2009-01-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: If engineering is the art and science of technical problem solving, systems architecting happens when you don't yet know what the problem is. The third edition of a highly respected bestseller, The Art of Systems Architecting provides in-depth coverage of the least understood part of systems design: moving from a vague concept and limited resources