Download or read book Fault Analysis and Protection System Design for DC Grids written by Abhisek Ukil and published by Springer Nature. This book was released on 2020-04-13 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive reference guide to the important topics of fault analysis and protection system design for DC grids, at various voltage levels and for a range of applications. It bridges a much-needed research gap to enable wide-scale implementation of energy-efficient DC grids. Following an introduction, DC grid architecture is presented, covering the devices, operation and control methods. In turn, analytical methods for DC fault analysis are presented for different types of faults, followed by separate chapters on various DC fault identification methods, using time, frequency and time-frequency domain analyses of the DC current and voltage signals. The unit and non-unit protection strategies are discussed in detail, while a dedicated chapter addresses DC fault isolation devices. Step-by-step guidelines are provided for building hardware-based experimental test setups, as well as methods for validating the various algorithms. The book also features several application-driven case studies.
Download or read book Short Circuits in AC and DC Systems written by J. C. Das and published by CRC Press. This book was released on 2017-10-24 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an understanding of the nature of short-circuit currents, current interruption theories, circuit breaker types, calculations according to ANSI/IEEE and IEC standards, theoretical and practical basis of short-circuit current sources, and the rating structure of switching devices. The book aims to explain the nature of short-circuit currents, the symmetrical components for unsymmetrical faults, and matrix methods of solutions, which are invariably used on digital computers. It includes innovations, worked examples, case studies, and solved problems.
Download or read book Power System Analysis written by J.C. Das and published by CRC Press. This book was released on 2017-12-19 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental to the planning, design, and operating stages of any electrical engineering endeavor, power system analysis continues to be shaped by dramatic advances and improvements that reflect today’s changing energy needs. Highlighting the latest directions in the field, Power System Analysis: Short-Circuit Load Flow and Harmonics, Second Edition includes investigations into arc flash hazard analysis and its migration in electrical systems, as well as wind power generation and its integration into utility systems. Designed to illustrate the practical application of power system analysis to real-world problems, this book provides detailed descriptions and models of major electrical equipment, such as transformers, generators, motors, transmission lines, and power cables. With 22 chapters and 7 appendices that feature new figures and mathematical equations, coverage includes: Short-circuit analyses, symmetrical components, unsymmetrical faults, and matrix methods Rating structures of breakers Current interruption in AC circuits, and short-circuiting of rotating machines Calculations according to the new IEC and ANSI/IEEE standards and methodologies Load flow, transmission lines and cables, and reactive power flow and control Techniques of optimization, FACT controllers, three-phase load flow, and optimal power flow A step-by-step guide to harmonic generation and related analyses, effects, limits, and mitigation, as well as new converter topologies and practical harmonic passive filter designs—with examples More than 2000 equations and figures, as well as solved examples, cases studies, problems, and references Maintaining the structure, organization, and simplified language of the first edition, longtime power system engineer J.C. Das seamlessly melds coverage of theory and practical applications to explore the most commonly required short-circuit, load-flow, and harmonic analyses. This book requires only a beginning knowledge of the per-unit system, electrical circuits and machinery, and matrices, and it offers significant updates and additional information, enhancing technical content and presentation of subject matter. As an instructional tool for computer simulation, it uses numerous examples and problems to present new insights while making readers comfortable with procedure and methodology.
Download or read book Power System Harmonics and Passive Filter Designs written by J. C. Das and published by John Wiley & Sons. This book was released on 2015-03-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: As new technologies are created and advances are made with the ongoing research efforts, power system harmonics has become a subject of great interest. The author presents these nuances with real-life case studies, comprehensive models of power system components for harmonics, and EMTP simulations. Comprehensive coverage of power system harmonics Presents new harmonic mitigation technologies In-depth analysis of the effects of harmonics Foreword written by Dr. Jean Mahseredijan, world renowned authority on simulations of electromagnetic transients and harmonics
Download or read book Electric Distribution Systems written by Abdelhay A. Sallam and published by John Wiley & Sons. This book was released on 2018-11-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the theory and practice for designing, operating, and optimizing electric distribution systems, revised and updated Now in its second edition, Electric Distribution Systems has been revised and updated and continues to provide a two-tiered approach for designing, installing, and managing effective and efficient electric distribution systems. With an emphasis on both the practical and theoretical approaches, the text is a guide to the underlying theory and concepts and provides a resource for applying that knowledge to problem solving. The authors—noted experts in the field—explain the analytical tools and techniques essential for designing and operating electric distribution systems. In addition, the authors reinforce the theories and practical information presented with real-world examples as well as hundreds of clear illustrations and photos. This essential resource contains the information needed to design electric distribution systems that meet the requirements of specific loads, cities, and zones. The authors also show how to recognize and quickly respond to problems that may occur during system operations, as well as revealing how to improve the performance of electric distribution systems with effective system automation and monitoring. This updated edition: • Contains new information about recent developments in the field particularly in regard to renewable energy generation • Clarifies the perspective of various aspects relating to protection schemes and accompanying equipment • Includes illustrative descriptions of a variety of distributed energy sources and their integration with distribution systems • Explains the intermittent nature of renewable energy sources, various types of energy storage systems and the role they play to improve power quality, stability, and reliability Written for engineers in electric utilities, regulators, and consultants working with electric distribution systems planning and projects, the second edition of Electric Distribution Systems offers an updated text to both the theoretical underpinnings and practical applications of electrical distribution systems.
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
Download or read book Arc Flash Hazard Analysis and Mitigation written by J. C. Das and published by John Wiley & Sons. This book was released on 2020-12-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the definitive arc flash reference guide, fully updated to align with the IEEE's updated hazard calculations An arc flash, an electrical breakdown of the resistance of air resulting in an electric arc, can cause substantial damage, fire, injury, or loss of life. Professionals involved in the design, operation, or maintenance of electric power systems require thorough and up-to-date knowledge of arc flash safety and prevention methods. Arc Flash Hazard Analysis and Mitigation is the most comprehensive reference guide available on all aspects of arc flash hazard calculations, protective current technologies, and worker safety in electrical environments. Detailed chapters cover protective relaying, unit protection systems, arc-resistant equipment, arc flash analyses in DC systems, and many more critical topics. Now in its second edition, this industry-standard resource contains fully revised material throughout, including a new chapter on calculation procedures conforming to the latest IEEE Guide 1584. Updated methodology and equations are complemented by new practical examples and case studies. Expanded topics include risk assessment, electrode configuration, the impact of system grounding, electrical safety in workplaces, and short-circuit currents. Written by a leading authority with more than three decades' experience conducting power system analyses, this invaluable guide: Provides the latest methodologies for flash arc hazard analysis as well practical mitigation techniques, fully aligned with the updated IEEE Guide for Performing Arc-Flash Hazard Calculations Explores an inclusive range of current technologies and strategies for arc flash mitigation Covers calculations of short-circuits, protective relaying, and varied electrical system configurations in industrial power systems Addresses differential relays, arc flash sensing relays, protective relaying coordination, current transformer operation and saturation, and more Includes review questions and references at the end of each chapter Part of the market-leading IEEE Series on Power Engineering, the second edition of Arc Flash Hazard Analysis and Mitigation remains essential reading for all electrical engineers and consulting engineers.
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book Recent Library Additions written by and published by . This book was released on 1992 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Standard Dictionary of Electrical and Electronics Terms written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1977 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dictionary of terms used in electronics and electrical engineering - includes a list of abbreviations. Diagrams, graphs and references.
Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.
Download or read book IEEE Std 1015 2006 Revision of IEEE Std 1015 1997 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1874 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1988 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book IEEE Recommended Practice for Monitoring Electric Power Quality written by and published by . This book was released on 2009 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This recommended practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. This recommended practice describes nominal conditions and deviations from these nominal conditions that may originate within the source of supply or load equipment or may originate from interactions between the source and the load. Also, this recommended practice discusses power quality monitoring devices, application techniques, and the interpretation of monitoring results. Keywords: assessment, compatibility, dip, distortion, electromagnetic phenomena, harmonics, imbalance, instruments, monitoring, power quality, rms variation, sag, swell, transient, unbalance.
Download or read book IEEE Standard Dictionary of Electrical and Electronics Terms written by Frank Jay and published by John Wiley & Sons. This book was released on 1984 with total page 1182 pages. Available in PDF, EPUB and Kindle. Book excerpt: General literature -- Reference.
