Download or read book Transformer Ageing written by Tapan Kumar Saha and published by John Wiley & Sons. This book was released on 2017-08-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop guide to transformer ageing, presenting industrially relevant state-of-the-art diagnostic techniques backed by extensive research data Offers a comprehensive coverage of transformer ageing topics including insulation materials, condition monitoring and diagnostic techniques Features chapters on smart transformer monitoring frameworks, transformer life estimation and biodegradable oil Highlights industrially relevant techniques adopted in electricity utilities, backed by extensive research
Download or read book Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems written by U. Mohan Rao and published by John Wiley & Sons. This book was released on 2021-12-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference and guide on the usage of the alternative dielectric fluids for transformer insulation systems Liquid-filled transformers are one of the most important and expensive components involved in the transmission and distribution of power to industrial and domestic loads. Although petroleum-based insulating oils have been used in transformers for decades, recent environmental concerns, health and safety considerations, and various technical factors have increased the need for new alternative and biodegradable liquids. Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems is an up-to-date reference and guide on natural and synthetic ester-based biodegradable insulating liquids. Covering the operational behavior, performance analysis, and maintenance of transformers filled with biodegradable insulating liquids, this comprehensive resource helps researchers and utility engineers expand their knowledge of the benefits, challenges, and application of ester-filled transformers. In-depth chapters written by experienced researchers addresses critical topics including transformer condition monitoring, high voltage insulation testing, biodegradable insulating material processing and evaluation, and more. A unique and significant contribution to existing literature on the subject, this authoritative volume: • Covers condition monitoring, diagnostic testing, applications, maintenance, and in-service experiences • Explores current challenges and future prospects of ester-filled transformers • Discusses significant research progress and identifies the topics in need of further emphasis • Compares the differences and similarities between mineral oils and ester liquids • Includes in-depth behavioral observations and performance analysis of ester-based insulating liquids Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications is a must-have reference for utility engineers, electrical power utilities, transformer owners, manufacturers, and researchers.
Download or read book Electrical Insulating Liquids written by and published by ASTM International. This book was released on 1994 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to the Preventive Conservation of Photograph Collections written by Bertrand Lavédrine and published by Getty Publications. This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A resource for the photographic conservator, conservation scientist, curator, as well as professional collector, this volume synthesizes both the masses of research that has been completed to date and the international standards that have been established on the subject.
Download or read book Risk Assessment Methods written by V.T. Covello and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has already been written about risk assessment. Epidemiologists write books on how risk assessment is used to explore the factors that influence the distribution of disease in populations of people. Toxicologists write books on how risk assess ment involves exposing animals to risk agents and concluding from the results what risks people might experience if similarly exposed. Engineers write books on how risk assessment is utilized to estimate the risks of constructing a new facility such as a nuclear power plant. Statisticians write books on how risk assessment may be used to analyze mortality or accident data to determine risks. There are already many books on risk assessment-the trouble is that they all seem to be about different sUbjects! This book takes another approach. It brings together all the methods for assessing risk into a common framework, thus demonstrating how the various methods relate to one another. This produces four important benefits: • First, it provides a comprehensive reference for risk assessment. This one source offers readers concise explanations of the many methods currently available for describing and quantifying diverse types of risks. • Second, it consistently evaluates and compares available risk assessment methods and identifies their specific strengths and limitations. Understand ing the limitations of risk assessment methods is important. The field is still in its infancy, and the problems with available methods are disappoint ingly numerous. At the same time, risk assessment is being used.
Download or read book Catalytic Processes for The Valorisation of Biomass Derived Molecules written by Francesco Mauriello and published by MDPI. This book was released on 2019-11-22 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades, inedible lignocellulosic biomasses have attracted significant attention for being abundant resources that are not in competition with agricultural land or food production and, therefore, can be used as starting renewable material for the production of a wide variety of platform chemicals. The three main components of lignocellulosic biomasses are cellulose, hemicellulose and lignin, complex biopolymers that can be converted into a pool of platform molecules including sugars, polyols, alchols, ketons, ethers, acids and aromatics. Various technologies have been explored for their one-pot conversion into chemicals, fuels and materials. However, in order to develop new catalytic processes for the selective production of desired products, a complete understanding of the molecular aspects of the basic chemistry and reactivity of biomass derived molecules is still crucial. This Special Issue reports on recent progress and advances in the catalytic valorization of cellulose, hemicellulose and lignin model molecules promoted by novel heterogeneous systems for the production of energy, fuels and chemicals.
Download or read book Guide to Industrial Assessments for Pollution Prevention and Energy Efficiency written by and published by DIANE Publishing. This book was released on 2001 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recycling and Reuse of Material Found on Superfund Sites written by Lawrence Smith and published by DIANE Publishing. This book was released on 1995-02 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides assistance in identifying recycling technologies for a wide variety of contaminants and matrices, including: energy recovery; decanting; thermal desorption; solvent extraction; pumping and recovery; freeze-crystallization; thermolysis; ion exchange; reverse osmosis; diffusion dialysis; evaporation; amalgamation; cementation; electrowinning; vitrification; physical separation; mercury distillation, etc. Contents: description of recycling technologies; product quality specifications; 8 case studies. Extensive references. 50 charts and tables.
Download or read book High Voltage Test Techniques written by Dieter Kind and published by Elsevier. This book was released on 2001-01-24 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of High Voltage Test Techniques has been completely revised. The present revision takes into account the latest international developments in High Voltage and Measurement technology, making it an essential reference for engineers in the testing field. High Voltage Technology belongs to the traditional area of Electrical Engineering. However, this is not to say that the area has stood still. New insulating materials, computing methods and voltage levels repeatedly pose new problems or open up methods of solution; electromagnetic compatibility (EMC) or components and systems also demand increased attention. The authors hope that their experience will be of use to students of Electrical Engineering confronted with High Voltage problems in their studies, in research and development and also in the testing field. - Benefit from a completely revised edition - Brings you up-to-date with th latest international developments in High Voltage and Measurement technology - An essential reference for engineers in the testing field
Download or read book Emerging Technologies in Non Destructive Testing VI written by Danny Van Hemelrijck and published by CRC Press. This book was released on 2015-11-24 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Destructive Testing (NDT) is of worldwide significance, and is strongly related to the detection of damage in engineering structures (buildings, bridges, aircrafts, ships, pressure vessels, etc.) using non-invasive techniques (ultrasound, X-rays, Radar, neutrons, thermography, vibrations, acoustic emission, etc.). Emerging Technologies in Non-D
Download or read book Advances in Clean Energy Technologies written by Prashant V. Baredar and published by Springer Nature. This book was released on 2021-05-30 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the international conference on Innovations in Clean Energy Technologies (ICET 2020) and examines a range of durable, energy efficient and next-generation smart green technologies for sustainable future by reflecting on the trends, advances and development taking place all across the globe. The topics covered include smart technologies based product, energy efficient systems, solar and wind energy, carbon sequestration, green transportation, green buildings, energy material, biomass energy, smart cites, hydro power, bio-energy and fuel cell. The book also discusses various performance attributes of these clean energy technologies and their workability and carbon footprint. The book will be a valuable reference for beginners, researchers and professionals interested in clean energy technologies.
Download or read book Computing Nature written by Gordana Dodig-Crnkovic and published by Springer Science & Business Media. This book was released on 2013-03-21 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about nature considered as the totality of physical existence, the universe, and our present day attempts to understand it. If we see the universe as a network of networks of computational processes at many different levels of organization, what can we learn about physics, biology, cognition, social systems, and ecology expressed through interacting networks of elementary particles, atoms, molecules, cells, (and especially neurons when it comes to understanding of cognition and intelligence), organs, organisms and their ecologies? Regarding our computational models of natural phenomena Feynman famously wondered: “Why should it take an infinite amount of logic to figure out what one tiny piece of space/time is going to do?” Phenomena themselves occur so quickly and automatically in nature. Can we learn how to harness nature’s computational power as we harness its energy and materials? This volume includes a selection of contributions from the Symposium on Natural Computing/Unconventional Computing and Its Philosophical Significance, organized during the AISB/IACAP World Congress 2012, held in Birmingham, UK, on July 2-6, on the occasion of the centenary of Alan Turing’s birth. In this book, leading researchers investigated questions of computing nature by exploring various facets of computation as we find it in nature: relationships between different levels of computation, cognition with learning and intelligence, mathematical background, relationships to classical Turing computation and Turing’s ideas about computing nature - unorganized machines and morphogenesis. It addresses questions of information, representation and computation, interaction as communication, concurrency and agent models; in short this book presents natural computing and unconventional computing as extension of the idea of computation as symbol manipulation.
Download or read book Handbook of Electrical Installation Practice written by Geoffrey Stokes and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Electrical Installation Practice covers all key aspects of industrial, commercial and domestic installations and draws on the expertise of a wide range of industrial experts. Chapters are devoted to topics such as wiring cables, mains and submains cables and distribution in buildings, as well as power supplies, transformers, switchgear, and electricity on construction sites. Standards and codes of practice, as well as safety, are also included. Since the Third Edition was published, there have been many developments in technology and standards. The revolution in electronic microtechnology has made it possible to introduce more complex technologies in protective equipment and control systems, and these have been addressed in the new edition. Developments in lighting design continue, and extra-low voltage luminaries for display and feature illumination are now dealt with, as is the important subject of security lighting. All chapters have been amended to take account of revisions to British and other standards, following the trend to harmonised European and international standards, and they also take account of the latest edition of the Wiring Regulations. This new edition will provide an invaluable reference for consulting engineers, electrical contractors and factory plant engineers.
Download or read book Greening the Industrial Facility written by Thomas Graedel and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and reference fills a critical gap in literature on the comprehensive environmental impacts of industrial organizations. Nineteen chapters examine individual industrial sectors inherent "potential to pollute." The text goes on to analyze new technologies and practices for transforming environmentally degrading effects of industry, and shows how managers can navigate these changes and move their organizations towards long-term environmental sustainability.
Download or read book Mechanical and Metal Trades Handbook written by Roland Gomeringer and published by . This book was released on 2018-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.
Download or read book Engineering Applications for New Materials and Technologies written by Andreas Öchsner and published by Springer. This book was released on 2018-01-25 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the expertise, skills, and techniques needed for the development of new materials and technologies. It focuses on finite element and finite volume methods that are used for engineering simulations, and present many state-of-the-art applications and advances to highlight these methods’ importance. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials. These composite materials are often exposed to harsh environments, must deliver specific characteristics, and are primarily used in automotive and marine technologies, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. To achieve the desired material performance, computer-based engineering tools are widely used for simulation, data evaluation, and design processes.
