Download or read book Selected Papers from 2018 IEEE International Conference on High Voltage Engineering ICHVE 2018 written by Issouf Fofana and published by MDPI. This book was released on 2021-03-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2018 IEEE International Conference on High Voltage Engineering (ICHVE 2018) was held on 10–13 September 2018 in Athens, Greece, organized by the National Technical University of Athens, Greece, and endorsed by the IEEE Dielectrics and Electrical Insulation Society. This conference has attracted a great deal of attention from international researchers in the field of high voltage engineering. This conference provided not only an excellent platform to share knowledge and experiences on high voltage engineering, but also the opportunity to present the latest achievements and different emerging challenges in power engineering, including topics related to ultra-high voltage, smart grids, and new insulation materials and their dielectric properties.
Download or read book Dealing with Aging Process Facilities and Infrastructure written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-04-03 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the concept of aging process facilities and infrastructure in high hazard industries and highlights options for dealing with the problem while addressing safety issues This book explores the many ways in which process facilities, equipment, and infrastructure might deteriorate upon continuous exposure to operating and climatic conditions. It covers the functional and physical failure modes for various categories of equipment and discusses the many warning signs of deterioration. Dealing with Aging Process Facilities and Infrastructure also explains how to deal with equipment that may not be safe to operate. The book describes a risk-based strategy in which plant leaders and supervisors can make more informed decisions on aging situations and then communicate them to upper management effectively. Additionally, it discusses the dismantling and safe removal of facilities that are approaching their intended lifecycle or have passed it altogether. Filled with numerous case studies featuring photographs to illustrate the positive and negative experiences of others who have dealt with aging facilities, Dealing with Aging Process Facilities and Infrastructure covers the causes of equipment failures due to aging and their consequences; plant management commitment and responsibility; inspection and maintenance practices for managing life cycle; specific aging asset integrity management practices; and more. Describes symptoms and causal mechanisms of aging in various categories of process equipment Presents key considerations for making informed risk-based decisions regarding the repair or replacement of aging process facilities and infrastructure Discusses practices for managing process facility and infrastructure life cycle Includes examples and case histories of failures related to aging Dealing with Aging Process Facilities and Infrastructure is an important book for industrial practitioners who are often faced with the challenge of managing process facilities and infrastructure as they approach the end of their useful lifecycle.
Download or read book IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems written by and published by . This book was released on 2002 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Guide lists the various field test methods that are currently available or under development with guidance on HOW to perform each test. The Guide covers shielded, insulated power cable systems rated 5 kV through 500 kV unless these voltages are modified by the specific "point" document."
Download or read book IEEE Design Guide for Electric Power Service Systems for Generating Stations written by American National Standards Institute and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1993-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lightning Protection Guide written by Dehn + Söhne (Neumarkt i.d. OPf.) and published by . This book was released on 2014 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electronics Design written by Keith H. Sueker and published by Elsevier. This book was released on 2005-08-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of practical design information ... the next-best-thing to having a mentor with a quarter-century of experience!
Download or read book Submarine Power Cables written by Thomas Worzyk and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for high-performance submarine power cables is increasing as more and more offshore wind parks are installed, and the national electric grids are interconnected. Submarine power cables are installed for the highest voltages and power to transport electric energy under the sea between islands, countries and even continents. The installation and operation of submarine power cables is much different from land cables. Still, in most textbooks on electrical power systems, information on submarine cables is scarce. This book is closing the gap. Different species of submarine power cables and their application are explained. Students and electric engineers learn on the electric and mechanic properties of submarine cables. Project developers and utility managers will gain useful information on the necessary marine activities such as pre-laying survey, cable lay vessels, guard boats etc., for the submarine cable installation and repair. Investors and decision makers will find an overview on environmental aspects of submarine power cables. A comprehensive reference list is given for those who want further reading.
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book Electric Power Transformer Engineering written by James H. Harlow and published by CRC Press. This book was released on 2003-08-15 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental theory of electric power transformers, this book provides the background required to understand the basic operation of electromagnetic induction as applied to transformers. The book is divided into three fundamental groupings: one stand-alone chapter is devoted to Theory and Principles, nine chapters individually treat majo
Download or read book Electromagnetic Compatibility in Railways written by Ade Ogunsola and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A railway is a complex distributed engineering system: the construction of a new railway or the modernisation of a existing one requires a deep understanding of the constitutive components and their interaction, inside the system itself and towards the outside world. The former covers the various subsystems (featuring a complex mix of high power sources, sensitive safety critical systems, intentional transmitters, etc.) and their interaction, including the specific functions and their relevance to safety. The latter represents all the additional possible external victims and sources of electromagnetic interaction. EMC thus starts from a comprehension of the emissions and immunity characteristics and the interactions between sources and victims, with a strong relationship to electromagnetics and to system modeling. On the other hand, the said functions are achieved and preserved and their relevance for safety is adequately handled, if the related requirements are well posed and managed throughout the process from the beginning. The link is represented by standards and their correct application, as a support to analysis, testing and demonstration.
Download or read book High Voltage Engineering Fundamentals written by John Kuffel and published by Elsevier. This book was released on 2000-07-17 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power transfer for large systems depends on high system voltages. The basics of high voltage laboratory techniques and phenomena, together with the principles governing the design of high voltage insulation, are covered in this book for students, utility engineers, designers and operators of high voltage equipment. In this new edition the text has been entirely revised to reflect current practice. Major changes include coverage of the latest instrumentation, the use of electronegative gases such as sulfur hexafluoride, modern diagnostic techniques, and high voltage testing procedures with statistical approaches. - A classic text on high voltage engineering - Entirely revised to bring you up-to-date with current practice - Benefit from expanded sections on testing and diagnostic techniques
Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
Download or read book IEEE Standard Power Cable Ampacity Tables written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 3000 ampacity tables for extruded dielectric power cables rated through 138 kV and laminar dielectric power cables rated through 500 kV are provided.
Download or read book High Voltage and Electrical Insulation Engineering written by Ravindra Arora and published by John Wiley & Sons. This book was released on 2022-03-10 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Voltage and Electrical Insulation Engineering A comprehensive graduate-level textbook on high voltage insulation engineering, updated to reflect emerging trends and techniques in the field High Voltage and Electrical Insulation Engineering presents systematic coverage of the behavior of dielectric materials. This classic textbook opens with clear explanations of fundamental terminology, electric-field classification, and field estimation techniques. Subsequent chapters describe the field dependent performance of gaseous, vacuum, liquid, and solid dielectrics under different classified field conditions, and illustrate the monitoring of electrical insulation conditions by both single and continuous online methods. Throughout the text, numerous tables, figures, diagrams, and images are provided to strengthen understanding of all material. Fully revised to incorporate the most current technological application techniques, the second edition offers an entirely new section on condition monitoring of electrical insulation. Updated chapters discuss recent developments in gas-filled power apparatus, present-day trends in the use replacement of liquid insulating materials, the latest applications of new solid dielectrics in high voltage engineering, vacuum technology and liquid insulating materials, and more. This edition features a brand-new case study exploring the estimation of clearance requirements for 25 kV electric traction. Readers will also find the new edition: Provides new coverage of advances in the field, such as the application of polymer insulators and the use of SF6 gas and its mixtures in gas-insulated systems/substations (GIS) Uses a novel approach that explores the field dependent behavior of dielectrics Explains the “weakly nonuniform field,” a unique concept introduced both conceptually and analytically in Germany A separate chapter provides the new approach to the mechanism of lightning phenomenon, which also includes the phenomenon of “Ball Lightning” The dielectric properties of vacuum and the development in the application of vacuum technology in power circuit breakers is covered in an exclusive chapter In-depth coverage of the performance of the sulphur-hexafluoride gas and its mixtures applicable to the design of Gas Insulated Systems including dry power transformers High Voltage and Electrical Insulation Engineering, Second Edition, remains the perfect textbook for graduate students, teachers, academic researchers, and utility and power industry engineers and scientists involved in the field.
Download or read book Lightning Protection of Aircraft written by Franklin Fisher and published by CreateSpace. This book was released on 2012-07-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to present under one cover the current state of knowledge concerning the potential lightning effects on aircraft and that means that are available to designers and operators to protect against these effects. The impetus for writing this book springs from two sources- the increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation function.
Download or read book IEEE Guide on Shielding Practice for Low Voltage Cables written by and published by Inst of Elect & Electronic. This book was released on 1995-01-01 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise overview of shielding options for various types of interference and recommendations on shielding practices, including suggestions on terminating and grounding methods, are provided.
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
