Download or read book IEEE Microwave and Millimeter Wave Monolithic Circuits Symposium Digest of Papers written by and published by . This book was released on 1991 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RFIC and MMIC Design and Technology written by I.D. Robertson and published by IET. This book was released on 2001-11-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth account of GaAs, InP and SiGe, technologies and describes all the key techniques for the design of amplifiers, ranging from filters and data converters to image oscillators, mixers, switches, variable attenuators, phase shifters, integrated antennas and complete monolithic transceivers.

Download or read book Microwave and Millimeter Wave Circuits and Systems written by Apostolos Georgiadis and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Download or read book The RF and Microwave Handbook written by Mike Golio and published by CRC Press. This book was released on 2000-12-20 with total page 1377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent shift in focus from defense and government work to commercial wireless efforts has caused the job of the typical microwave engineer to change dramatically. The modern microwave and RF engineer is expected to know customer expectations, market trends, manufacturing technologies, and factory models to a degree that is unprecedented in the

Download or read book The RF and Microwave Handbook 3 Volume Set written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 2208 pages. Available in PDF, EPUB and Kindle. Book excerpt: By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.

Download or read book 1993 IEEE MTT S International Microwave Symposium Digest written by Waymond R. Scott and published by . This book was released on 1993 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RF and Microwave Applications and Systems written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, RF and Microwave Applications and Systems, includes a wide range of articles that discuss RF and microwave systems used for communication and radar and heating applications. Commercial, avionics, medical, and military applications are addressed. An overview of commercial communications systems is provided. Past, current, and emerging cellular systems, navigation systems, and satellite-based systems are discussed. Specific voice and data commercial systems are investigated more thoroughly in individual chapters that follow. Detailed discussions of military electronics, avionics, and radar (both military and automotive) are provided in separate chapters. A chapter focusing on FR/microwave energy used for therapeutic medicine is also provided. Systems considerations including thermal, mechanical, reliability, power management, and safety are discussed in separate chapters. Engineering processes are also explored in articles about corporate initiatives, cost modeling, and design reviews. The book closes with a discussion of the underlying physics of electromagnetic propagation and interference. In addition to new chapters on WiMAX and broadband cable, nearly every existing chapter features extensive updates and several were completely rewritten to reflect the massive changes areas such as radio navigation and electronic warfare.

Download or read book Coplanar Microwave Integrated Circuits written by Ingo Wolff and published by John Wiley & Sons. This book was released on 2006-09-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques to fully leverage coplanar technology Coplanar Microwave Integrated Circuits sets forth the theoretical underpinnings of coplanar waveguides and thoroughly examines the various coplanar components such as discontinuities, lumped elements, resonators, couplers, and filters, which are essential for microwave integrated circuit design. Based on the results of his own research findings, the author effectively demonstrates the many advantages of coplanar waveguide technology for modern circuit design. Following a brief introductory chapter, the text thoroughly covers the material needed for successful design and realization of coplanar microwave circuits, including: * Fundamental transmission properties of coplanar waveguides using a full wave analysis * Detailed analysis of most discontinuities used in coplanar waveguide design * Lumped elements in coplanar technology that are needed in circuit design * Development of software for coplanar circuit design, including a CD-ROM containing a test version of the software for modeling coplanar circuit components and circuits * Application of derived results to build more complex components such as lumped element filters, waveguide filters, millimeter wave filters, end-coupled waveguide structures, waveguide couplers, and Wilkinson couplers for different frequency ranges in coplanar technology The final chapter focuses on special coplanar microwave integrated circuits that have been developed using the software presented in the text. The book concludes with a thought-provoking discussion of the advantages and disadvantages of the coplanar technique. Extensive use of figures and tables helps readers easily digest and visualize complex concepts. A bibliography is included at the end of each chapter for further study and research. Coplanar Microwave Integrated Circuits is recommended for graduate students and engineers in RF microwaves who want to reap all the advantages and possibilities of coplanar technology.

Download or read book High Speed Heterostructure Devices written by and published by Academic Press. This book was released on 1994-07-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 41 includes an in-depth review of the most important, high-speed switches made with heterojunction technology. This volume is aimed at the graduate student or working researcher who needs a broad overview andan introduction to current literature. - The first complete review of InP-based HFETs and complementary HFETs, which promise very low power and high speed - Offers a complete, three-chapter review of resonant tunneling - Provides an emphasis on circuits as well as devices

Download or read book RF MEMS written by Gabriel M. Rebeiz and published by John Wiley & Sons. This book was released on 2004-02-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasmall Radio Frequency and Micro-wave Microelectromechanical systems (RF MEMs), such as switches, varactors, and phase shifters, exhibit nearly zero power consumption or loss. For this reason, they are being developed intensively by corporations worldwide for use in telecommunications equipment. This book acquaints readers with the basics of RF MEMs and describes how to design practical circuits and devices with them. The author, an acknowledged expert in the field, presents a range of real-world applications and shares many valuable tricks of the trade.

Download or read book Gallium Arsenide IC Applications Handbook written by and published by Elsevier. This book was released on 1995-09-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium Arsenide IC Applications Handbook is the first text to offer a comprehensive treatment of Gallium Arsenide (GaAs) integrated chip (IC) applications, specifically in microwave systems. The books coverage of GaAs in microwave monolithic ICs demonstrates why GaAs is being hailed as a material of the future for the various advantages it holds over silicon. This volume provides scientists, physicists, electrical engineers, and technology professionals and managers working on microwave technology with practical information on GaAs applications in radar, electronic warfare, communications, consumer electronics, automotive electronics and traffic control. Includes an executive summary in each volume and chapter Facilitates comprehension with its tutorial writing style Covers key technical issues Emphasizes practical aspects of the technology Contains minimal mathematics Provides a complete reference list

Download or read book RF MEMS and Their Applications written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2003-07-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) refer to a collection of micro-sensors and actuators, which can react to environmental change under micro- circuit control. The integration of MEMS into traditional Radio Frequency (RF) circuits has resulted in systems with superior performance levels and lower manufacturing costs. The incorporation of MEMS based fabrication technologies into micro and millimeter wave systems offers viable routes to ICs with MEMS actuators, antennas, switches and transmission lines. The resultant systems operate with an increased bandwidth and increased radiation efficiency and have considerable scope for implementation within the expanding area of wireless personal communication devices. This text provides leading edge coverage of this increasingly important area and highlights the overlapping information requirements of the RF and MEMS research and development communities. * Provides an introduction to micromachining techniques and their use in the fabrication of micro switches, capacitors and inductors * Includes coverage of MEMS devices for wireless and Bluetooth enabled systems Essential reading for RF Circuit design practitioners and researchers requiring an introduction to MEMS technologies, as well as practitioners and researchers in MEMS and silicon technology requiring an introduction to RF circuit design.

Download or read book Electromagnetics and Network Theory and their Microwave Technology Applications written by Stefan Lindenmeier and published by Springer Science & Business Media. This book was released on 2011-07-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a discussion of the challenges and perspectives of electromagnetics and network theory and their microwave applications in all aspects. It collects the most interesting contribution of the symposium dedicated to Professor Peter Russer held in October 2009 in Munich.

Download or read book RF and Microwave Semiconductor Device Handbook written by Mike Golio and published by CRC Press. This book was released on 2017-12-19 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a single volume reference for high frequency semiconductor devices, this handbook covers basic material characteristics, system level concerns and constraints, simulation and modeling of devices, and packaging. Individual chapters detail the properties and characteristics of each semiconductor device type, including: Varactors, Schottky diodes, transit-time devices, BJTs, HBTs, MOSFETs, MESFETs, and HEMTs. Written by leading researchers in the field, the RF and Microwave Semiconductor Device Handbook provides an excellent starting point for programs involving development, technology comparison, or acquisition of RF and wireless semiconductor devices.

Download or read book The Electrical Engineering Handbook Second Edition written by Richard C. Dorf and published by CRC Press. This book was released on 1997-09-26 with total page 2758 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1993, the first edition of The Electrical Engineering Handbook set a new standard for breadth and depth of coverage in an engineering reference work. Now, this classic has been substantially revised and updated to include the latest information on all the important topics in electrical engineering today. Every electrical engineer should have an opportunity to expand his expertise with this definitive guide. In a single volume, this handbook provides a complete reference to answer the questions encountered by practicing engineers in industry, government, or academia. This well-organized book is divided into 12 major sections that encompass the entire field of electrical engineering, including circuits, signal processing, electronics, electromagnetics, electrical effects and devices, and energy, and the emerging trends in the fields of communications, digital devices, computer engineering, systems, and biomedical engineering. A compendium of physical, chemical, material, and mathematical data completes this comprehensive resource. Every major topic is thoroughly covered and every important concept is defined, described, and illustrated. Conceptually challenging but carefully explained articles are equally valuable to the practicing engineer, researchers, and students. A distinguished advisory board and contributors including many of the leading authors, professors, and researchers in the field today assist noted author and professor Richard Dorf in offering complete coverage of this rapidly expanding field. No other single volume available today offers this combination of broad coverage and depth of exploration of the topics. The Electrical Engineering Handbook will be an invaluable resource for electrical engineers for years to come.

Download or read book RF MEMS Circuit Design for Wireless Communications written by Héctor J. de los Santos and published by Artech House. This book was released on 2002 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book to address the design of RF MEMS-based circuits for use in high performance wireless systems. A groundbreaking research and reference tool, the book enables you to understand the realm of applications of RF MEMS technology; become knowledgeable of the wide variety and performance levels of RF MEMS devices; and partition the architecture of wireless systems to achieve greater levels of performance. This innovative resource also guides you through the design process of RF MEMS-based circuits, and establishes a practical knowledge base for the design of high-yield RF MEMS-based circuits. The book features exercises and detailed case studies on working RF MEMS circuits that help you decide what approaches best fit your design constraints. This unified treatment of RF MEMS-based circuit technology opens up a new world of solutions for meeting the unique challenges of low power/portable wireless products.

Download or read book Millimeter Wave Wireless Communications written by Theodore S. Rappaport and published by Pearson Education. This book was released on 2015 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive, Comprehensive Guide to Cutting-Edge Millimeter Wave Wireless Design “This is a great book on mmWave systems that covers many aspects of the technology targeted for beginners all the way to the advanced users. The authors are some of the most credible scholars I know of who are well respected by the industry. I highly recommend studying this book in detail.” —Ali Sadri, Ph.D., Sr. Director, Intel Corporation, MCG mmWave Standards and Advanced Technologies Millimeter wave (mmWave) is today's breakthrough frontier for emerging wireless mobile cellular networks, wireless local area networks, personal area networks, and vehicular communications. In the near future, mmWave products, systems, theories, and devices will come together to deliver mobile data rates thousands of times faster than today's existing cellular and WiFi networks. In Millimeter Wave Wireless Communications, four of the field's pioneers draw on their immense experience as researchers, entrepreneurs, inventors, and consultants, empowering engineers at all levels to succeed with mmWave. They deliver exceptionally clear and useful guidance for newcomers, as well as the first complete desk reference for design experts. The authors explain mmWave signal propagation, mmWave circuit design, antenna designs, communication theory, and current standards (including IEEE 802.15.3c, Wireless HD, and ECMA/WiMedia). They cover comprehensive mmWave wireless design issues, for 60 GHz and other mmWave bands, from channel to antenna to receiver, introducing emerging design techniques that will be invaluable for research engineers in both industry and academia. Topics include Fundamentals: communication theory, channel propagation, circuits, antennas, architectures, capabilities, and applications Digital communication: baseband signal/channel models, modulation, equalization, error control coding, multiple input multiple output (MIMO) principles, and hardware architectures Radio wave propagation characteristics: indoor and outdoor applications Antennas/antenna arrays, including on-chip and in-package antennas, fabrication, and packaging Analog circuit design: mmWave transistors, fabrication, and transceiver design approaches Baseband circuit design: multi–gigabit-per-second, high-fidelity DAC and ADC converters Physical layer: algorithmic choices, design considerations, and impairment solutions; and how to overcome clipping, quantization, and nonlinearity Higher-layer design: beam adaptation protocols, relaying, multimedia transmission, and multiband considerations 60 GHz standardization: IEEE 802.15.3c for WPAN, Wireless HD, ECMA-387, IEEE 802.11ad, Wireless Gigabit Alliance (WiGig)