Download or read book Identifying Hard to detect Delay Defects by Testing at Multiple Test speeds written by Jae-Kwang Lee and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Test and Diagnosis for Small Delay Defects written by Mohammad Tehranipoor and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will introduce new techniques for detecting and diagnosing small-delay defects in integrated circuits. Although this sort of timing defect is commonly found in integrated circuits manufactured with nanometer technology, this will be the first book to introduce effective and scalable methodologies for screening and diagnosing small-delay defects, including important parameters such as process variations, crosstalk, and power supply noise.

Download or read book Testing for Small Delay Defects in Nanoscale CMOS Integrated Circuits written by Sandeep K. Goel and published by CRC Press. This book was released on 2017-12-19 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in design methods and process technologies have resulted in a continuous increase in the complexity of integrated circuits (ICs). However, the increased complexity and nanometer-size features of modern ICs make them susceptible to manufacturing defects, as well as performance and quality issues. Testing for Small-Delay Defects in Nanoscale CMOS Integrated Circuits covers common problems in areas such as process variations, power supply noise, crosstalk, resistive opens/bridges, and design-for-manufacturing (DfM)-related rule violations. The book also addresses testing for small-delay defects (SDDs), which can cause immediate timing failures on both critical and non-critical paths in the circuit. Overviews semiconductor industry test challenges and the need for SDD testing, including basic concepts and introductory material Describes algorithmic solutions incorporated in commercial tools from Mentor Graphics Reviews SDD testing based on "alternative methods" that explores new metrics, top-off ATPG, and circuit topology-based solutions Highlights the advantages and disadvantages of a diverse set of metrics, and identifies scope for improvement Written from the triple viewpoint of university researchers, EDA tool developers, and chip designers and tool users, this book is the first of its kind to address all aspects of SDD testing from such a diverse perspective. The book is designed as a one-stop reference for current industrial practices, research challenges in the domain of SDD testing, and recent developments in SDD solutions.

Download or read book Methodologies for Test and Diagnosis of Delay Defects in Integrated Circuits written by Ahish Mysore Somashekar and published by . This book was released on 2015 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of devices due to timing-related defects is becoming increasingly prominent in the nanometer era, thereby causing quality and reliability concerns. The variations in physical parameters and the increasing influence of environmental factors are the potential sources of such timing-related defects. In this dissertation we present novel techniques for detection and diagnosis of such timing-related defects, in particular small delay defects, in modern integrated circuits. First, an approach capable of identifying the locations of distributed small delay defects, arising due to manufacturing aberrations, is proposed. It is shown that the proposed formulation can be transformed into a Boolean Satisfiability form to be solved by any SAT solver. The approach is capable of providing a small number of alternative sets of defective segments. One of the solutions is the actual defect configuration. This is shown to be a very important property towards the effective identification of the defective segments. Experimental analysis on ISCAS and ITC benchmark suites show that the proposed approach is highly scalable and identifies the location of multiple delay defects. Second, a Monte Carlo based approach is proposed capable of identifying in a path-implicit and scalable manner the distributions that describe the delay of every path in a combinational circuit. Furthermore, a scalable approach to select critical paths from a potentially exponential number of path candidates is presented. Paths and their delay distributions are stored in Zero Suppressed Binary Decision Diagrams. Experimental results on some of the largest ISCAS-89 and ITC-99 benchmarks shows that the proposed method is highly scalable and effective. Lastly, an approach to select a set of longest (highest critical) paths under a probabilistic delay model is presented. It is shown how to select a set of top critical paths that need to be tested for a given test margin and subsequently, it is shown how one can select critical paths to effectively test a device for small delay defects that may occur due to undesirable process shifts in different pockets of the device. Experimental analysis compares the proposed approach to recent approaches in the literature that claim to select critical paths for testing and merits both based on their effectiveness in detecting random delay defects in the device under test.

Download or read book Defect Oriented Testing for CMOS Analog and Digital Circuits written by Manoj Sachdev and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect oriented testing is expected to play a significant role in coming generations of technology. Smaller feature sizes and larger die sizes will make ICs more sensitive to defects that can not be modeled by traditional fault modeling approaches. Furthermore, with increased level of integration, an IC may contain diverse building blocks. Such blocks include, digital logic, PLAs, volatile and non-volatile memories, and analog interfaces. For such diverse building blocks, traditional fault modeling and test approaches will become increasingly inadequate. Defect oriented testing methods have come a long way from a mere interesting academic exercise to a hard industrial reality. Many factors have contributed to its industrial acceptance. Traditional approaches of testing modern integrated circuits (ICs) have been found to be inadequate in terms of quality and economics of test. In a globally competitive semiconductor market place, overall product quality and economics have become very important objectives. In addition, electronic systems are becoming increasingly complex and demand components of highest possible quality. Testing, in general and, defect oriented testing, in particular, help in realizing these objectives. Defect Oriented Testing for CMOS Analog and Digital Circuits is the first book to provide a complete overview of the subject. It is essential reading for all design and test professionals as well as researchers and students working in the field. `A strength of this book is its breadth. Types of designs considered include analog and digital circuits, programmable logic arrays, and memories. Having a fault model does not automatically provide a test. Sometimes, design for testability hardware is necessary. Many design for testability ideas, supported by experimental evidence, are included.' ... from the Foreword by Vishwani D. Agrawal

Download or read book Defect Oriented Testing for Nano Metric CMOS VLSI Circuits written by Manoj Sachdev and published by Springer Science & Business Media. This book was released on 2007-06-04 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of defect oriented testing has been extensively updated. New chapters on Functional, Parametric Defect Models and Inductive fault Analysis and Yield Engineering have been added to provide a link between defect sources and yield. The chapter on RAM testing has been updated with focus on parametric and SRAM stability testing. Similarly, newer material has been incorporated in digital fault modeling and analog testing chapters. The strength of Defect Oriented Testing for nano-Metric CMOS VLSIs lies in its industrial relevance.

Download or read book Test Generation of Crosstalk Delay Faults in VLSI Circuits written by S. Jayanthy and published by Springer. This book was released on 2018-09-20 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a variety of test generation algorithms for testing crosstalk delay faults in VLSI circuits. It introduces readers to the various crosstalk effects and describes both deterministic and simulation-based methods for testing crosstalk delay faults. The book begins with a focus on currently available crosstalk delay models, test generation algorithms for delay faults and crosstalk delay faults, before moving on to deterministic algorithms and simulation-based algorithms used to test crosstalk delay faults. Given its depth of coverage, the book will be of interest to design engineers and researchers in the field of VLSI Testing.

Download or read book Testing of Interposer Based 2 5D Integrated Circuits written by Ran Wang and published by Springer. This book was released on 2017-03-20 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an insightful guide to the design, testing and optimization of 2.5D integrated circuits. The authors describe a set of design-for-test methods to address various challenges posed by the new generation of 2.5D ICs, including pre-bond testing of the silicon interposer, at-speed interconnect testing, built-in self-test architecture, extest scheduling, and a programmable method for low-power scan shift in SoC dies. This book covers many testing techniques that have already been used in mainstream semiconductor companies. Readers will benefit from an in-depth look at test-technology solutions that are needed to make 2.5D ICs a reality and commercially viable.

Download or read book Multi Chip Module Test Strategies written by Yervant Zorian and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: MCMs today consist of complex and dense VLSI devices mounted into packages that allow little physical access to internal nodes. The complexity and cost associated with their test and diagnosis are major obstacles to their use. Multi-Chip Module Test Strategies presents state-of-the-art test strategies for MCMs. This volume of original research is designed for engineers interested in practical implementations of MCM test solutions and for designers looking for leading edge test and design-for-testability solutions for their next designs. Multi-Chip Module Test Strategies consists of eight contributions by leading researchers. It is designed to provide a comprehensive and well-balanced coverage of the MCM test domain. Multi-Chip Module Test Strategies has also been published as a special issue of the Journal of Electronic Testing: Theory and Applications (JETTA, Volume 10, Numbers 1 and 2).

Download or read book EDA for IC System Design Verification and Testing written by Louis Scheffer and published by CRC Press. This book was released on 2018-10-03 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The first volume, EDA for IC System Design, Verification, and Testing, thoroughly examines system-level design, microarchitectural design, logical verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for IC designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. Save on the complete set.

Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Download or read book Iddq Testing for CMOS VLSI written by Rochit Rajsuman and published by Artech House Publishers. This book was released on 1995 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses in detail the correlation between physical defects and logic faults, and shows you how Iddq testing locates these defects. The book provides planning guidelines and optimization methods and is illustrated with numerous examples ranging from simple circuits to extensive case studies.

Download or read book Advances in Electronic Testing written by Dimitris Gizopoulos and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a new type of edited volume in the Frontiers in Electronic Testing book series devoted to recent advances in electronic circuits testing. The book is a comprehensive elaboration on important topics which capture major research and development efforts today. "Hot" topics of current interest to test technology community have been selected, and the authors are key contributors in the corresponding topics.

Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.

Download or read book Nanometer Technology Designs written by Nisar Ahmed and published by Springer Science & Business Media. This book was released on 2010-02-26 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional at-speed test methods cannot guarantee high quality test results as they face many new challenges. Supply noise effects on chip performance, high test pattern volume, small delay defect test pattern generation, high cost of test implementation and application, and utilizing low-cost testers are among these challenges. This book discusses these challenges in detail and proposes new techniques and methodologies to improve the overall quality of the transition fault test.

Download or read book A Designer s Guide to Built In Self Test written by Charles E. Stroud and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent technological advance is the art of designing circuits to test themselves, referred to as a Built-In Self-Test. This book is written from a designer's perspective and describes the major BIST approaches that have been proposed and implemented, along with their advantages and limitations.

Download or read book Delay Fault Testing for VLSI Circuits written by Angela Krstic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early days of digital design, we were concerned with the logical correctness of circuits. We knew that if we slowed down the clock signal sufficiently, the circuit would function correctly. With improvements in the semiconductor process technology, our expectations on speed have soared. A frequently asked question in the last decade has been how fast can the clock run. This puts significant demands on timing analysis and delay testing. Fueled by the above events, a tremendous growth has occurred in the research on delay testing. Recent work includes fault models, algorithms for test generation and fault simulation, and methods for design and synthesis for testability. The authors of this book, Angela Krstic and Tim Cheng, have personally contributed to this research. Now they do an even greater service to the profession by collecting the work of a large number of researchers. In addition to expounding such a great deal of information, they have delivered it with utmost clarity. To further the reader's understanding many key concepts are illustrated by simple examples. The basic ideas of delay testing have reached a level of maturity that makes them suitable for practice. In that sense, this book is the best x DELAY FAULT TESTING FOR VLSI CIRCUITS available guide for an engineer designing or testing VLSI systems. Tech niques for path delay testing and for use of slower test equipment to test high-speed circuits are of particular interest.