Download or read book Identification of Non Pertechnetate Species in Hanford Tank Waste Their Synthesis Characterization and Fundamental Chemistry written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technetium, as pertechnetate (TcO4 - ), is a mobile species in the environment. This characteristic, along with its long half-life, (99Tc, t1/2 = 213,000 a) makes technetium a major contributor to the long-term hazard associated with low level waste (LLW) disposal. Technetium partitioning from the nuclear waste at DOE sites will be required so that the LLW forms meet DOE performance assessment criteria. Technetium separations assume that technetium exists as TcO4 - in the waste. However, years of thermal, chemical, and radiolytic digestion in the presence of organic material, has transformed much of the TcO4 - into unidentified, stable, reduced, technetium complexes. To successfully partition technetium from tank wastes, it will be necessary to either remove these technetium species with a new process, or reoxidize them to TcO4 - so that conventional pertechnetate separation schemes will be successful.
Download or read book Identification of Non Pertechnetate Species In Hanford Tank Waste Their Synthesis Characterization And Fundamental Chemistry written by Norman Schroeder and published by . This book was released on 2004 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proposal had three major goals: (1) develop capillary electrophoresis mass spectrometry as a characterization technique, (2) separate a non-pertechnetate fraction from a waste sample and identify the non-pertechnetate species in it by CEMS, and (3) synthesize and characterize bulk quantities of the identified non-pertechnetate species and study their ligand substitution and redox chemistry.
Download or read book Chemical Characterization of an Envelope A Sample from Hanford Tank 241 AN 103 written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A whole tank composite sample from Hanford waste tank 241-AN-103 was received at the Savannah River Technology Center (SRTC) and chemically characterized. Prior to characterization the sample was diluted to (approximately)5 M sodium concentration. The filtered supernatant liquid, the total dried solids of the diluted sample, and the washed insoluble solids obtained from filtration of the diluted sample were analyzed. A mass balance calculation of the three fractions of the sample analyzed indicate the analytical results appear relatively self-consistent for major components of the sample. However, some inconsistency was observed between results where more than one method of determination was employed and for species present in low concentrations. A direct comparison to previous analyses of material from tank 241-AN-103 was not possible due to unavailability of data for diluted samples of tank 241-AN-103 whole tank composites. However, the analytical data for other types of samples from 241-AN-103 we re mathematically diluted and compare reasonably with the current results. Although the segments of the core samples used to prepare the sample received at SRTC were combined in an attempt to produce a whole tank composite, determination of how well the results of the current analysis represent the actual composition of the Hanford waste tank 241-AN-103 remains problematic due to the small sample size and the large size of the non-homogenized waste tank.
Download or read book Tank Waste Characterization at the Hanford Site written by David Lowe and published by . This book was released on 1995 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Hanford Tank Wastes Containing Ferrocyanides written by and published by . This book was released on 1993 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, 17 storage tanks on the Hanford site that are believed to contain> 1,000 gram moles (465 lbs) of ferrocyanide compounds have been identified. Seven other tanks are classified as ferrocyanide containing waste tanks, but contain less than 1,000 gram moles of ferrocyanide compounds. These seven tanks are still included as Hanford Watch List Tanks. These tanks have been declared an unreviewed safety question (USQ) because of potential thermal reactivity hazards associated with the ferrocyanide compounds and nitrate and nitrite. Hanford tanks with waste containing> 1,000 gram moles of ferrocyanide have been sampled. Extensive chemical, radiothermical, and physical characterization have been performed on these waste samples. The reactivity of these wastes were also studied using Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis. Actual tank waste samples were retrieved from tank 241-C-112 using a specially designed and equipped core-sampling truck. Only a small portion of the data obtained from this characterization effort will be reported in this paper. This report will deal primarily with the cyanide and carbon analyses, thermal analyses, and limited physical property measurements.
Download or read book Waste Forms Technology and Performance written by National Research Council and published by National Academies Press. This book was released on 2011-09-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy's Office of Environmental Management (DOE-EM) is responsible for cleaning up radioactive waste and environmental contamination resulting from five decades of nuclear weapons production and testing. A major focus of this program involves the retrieval, processing, and immobilization of waste into stable, solid waste forms for disposal. Waste Forms Technology and Performance, a report requested by DOE-EM, examines requirements for waste form technology and performance in the cleanup program. The report provides information to DOE-EM to support improvements in methods for processing waste and selecting and fabricating waste forms. Waste Forms Technology and Performance places particular emphasis on processing technologies for high-level radioactive waste, DOE's most expensive and arguably most difficult cleanup challenge. The report's key messages are presented in ten findings and one recommendation.
Download or read book Application of Ion Exchange Processes for the Treatment of Radioactive Waste and Management of Spent Ion Exchangers written by and published by . This book was released on 2002 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion exchange is one of the most common and effective treatment methods for liquid radioactive waste. This book reviews the current literature on the subject and reports on the existing state of the art of the application of ion exchange processes for liquid radioactive waste treatments and of the management of spent ion exchange media.
Download or read book Differential Ion Mobility Spectrometry written by Alexandre A. Shvartsburg and published by CRC Press. This book was released on 2008-12-24 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, scientific and engineering interests have been shifting from conventional ion mobility spectrometry (IMS) to field asymmetric waveform ion mobility spectrometry (FAIMS). Differential Ion Mobility Spectrometry: Nonlinear Ion Transport and Fundamentals of FAIMS explores this new analytical technology that separates and characterizes ions by the difference between their mobility in gases at high and low electric fields. It also covers the novel topics of higher-order differential IMS and IMS with alignment of dipole direction. The book relates the fundamentals of FAIMS and other nonlinear IMS methods to the physics of gas-phase ion transport. It begins with the basics of ion diffusion and mobility in gases, covering the main attributes of conventional IMS that are relevant to all IMS approaches. Building on this foundation, the author reviews diverse high-field transport phenomena that underlie differential IMS. He discusses the conceptual implementation and first-principles optimization of FAIMS as a filtering technique, emphasizing the dependence of FAIMS performance metrics on instrumental parameters and properties of ion species. He also explores ion reactions in FAIMS caused by field heating and the effects of inhomogeneous electric field in curved FAIMS gaps. Written by an accomplished scientist in the field, this state-of-the-art book supplies the foundation to understand the new technology of nonlinear IMS methods.
Download or read book Liquid Biphasic System written by Pau Loke Show and published by Elsevier. This book was released on 2020-11-28 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downstream bioprocesses have a significant role to play in the creation of a sustainable bio-based economy, enabling the creation of new products and systems from the more sustainable bioprocessing of natural products. Liquid Biphasic System: Fundamentals, Methods, and Applications in Bioseparation Technology explores in detail the fundamental processes and applications of this new separation system, aiding understanding of the basic principles of the technique and offering constructive criticisms on the latest findings.Including coverage of the background, principles, mechanisms, and applications, Liquid Biphasic System addresses how to adapt the technology for the purification of useful compounds with greater cost efficiency and greener processing. It is essential reading for bioprocess engineers, biochemical engineers, biosystem engineers, chemists and microbiologists working in the fields of bioprocessing. Researchers, scientists, and engineers concerned with the selection and evaluation of alternative bioseparation processes will find the book particularly useful. - Provides information and examples of advanced separations in a single source - Includes detailed descriptions of novel bioseparation systems - Covers the latest technologies related to advanced liquid–liquid separation and their applications in various industries
Download or read book State of the art Report on the Progress of Nuclear Fuel Cycle Chemistry written by and published by . This book was released on 2018 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of advanced nuclear systems requires that new technologies associated with the back end of the fuel cycle are developed. The separation of minor actinides from other fuel components is one of the advanced concepts being studied to help close the nuclear fuel cycle and to improve the long-term effects on the performance of geological repositories. Separating spent fuel elements and subsequently converting them through transmutation into short-lived nuclides should considerably reduce the longterm risks associated with nuclear power generation.
Download or read book New Separation Chemistry Techniques for Radioactive Waste and Other Specific Applications written by L. Cécille and published by Springer. This book was released on 1991-07-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of a technical seminar jointly organized by the Commission of the European Communities (CEC), Directorate-General for Science, Research, and Development and by the Italian Commission for Nuclear and Alternative Energy Sources (ENEA)"--T.p. verso.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Joint Replacement Technology written by Peter A. Revell and published by Woodhead Publishing. This book was released on 2021-07-28 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Joint Replacement Technology provides a thoroughly updated review of recent developments in joint replacement technology. Joint replacement is a standard treatment for joint degradation and has improved the quality of life of millions of patients. Collaboration between clinicians and researchers is critical to its continued success and to meet the rising expectations of patients and surgeons.This edition covers a range of updated and new content, ranging from chapters on materials analysis and selection, to methodologies and techniques used for joint replacement and clinical challenges of replacing specific joints. Key topics include tribological considerations and experiments; challenges in joint bearing surfaces; cementless fixation techniques; healing responses to implants. Clinical challenges and perspectives are covered with the aid of case studies.Thanks to its widespread collaboration and international contributors, Joint Replacement Technology, Third Edition is useful for materials scientists and engineers in both academia and the biomedical industry. Chemists, clinicians, and other researchers in this area will also find this text invaluable. - This third edition provides an updated comprehensive review of recent developments in joint replacement technology - Reviews a range of specific joints, biological and mechanical issues and fixation techniques - Includes revised and new content, such as sections on regulatory affairs, AI techniques and 3D printing
Download or read book Green Solvents for Chemistry written by William M. Nelson and published by Oxford University Press. This book was released on 2003-03-27 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to introduce the use of green solvents throughout chemistry and to provide a comprehensive reference for solvents currently applicable in green chemistry. The first section covers solvents in chemical perspective, and the second section is a guide to green solvents. Overall, this volume defines characteristics of green solvents and their current usage, and explores their importance ecologically and economically. It includes a full range of commercial, industrial, and academic green solvents, and discusses solvents in specific commercial and non-commercial practices. Green Solvents for Chemistry differs from other works on solvents in that only solvents for green chemistry are included along with their chemical properties and toxicological issues.
Download or read book Solvent Extraction written by Vladimir S Kislik and published by Elsevier. This book was released on 2011-11-04 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main challenge in modern solvent extraction separation is that most techniques are mainly empirical, specific and particular for narrow fields of practice and require a large degree of experimentation. This concise and modern book provides a complete overview of both solvent extraction separation techniques and the novel and unified competitive complexation/solvation theory. This novel and unified technique presented in the book provides a key for a preliminary quantitative prediction of suitable extraction systems without experimentation, thus saving researchers time and resources. Analyzes and compares both classical and new competitive models and techniques Offers a novel and unified competitive complexation / solvation theory that permits researchers to standardize some parameters, which decreases the need for experimentation at R&D Presents examples of applications in multiple disciplines such as chemical, biochemical, radiochemical, pharmaceutical and analytical separation Written by an outstanding scientist who is prolific in the field of separation science
Download or read book UV visible Spectrophotometry of Water and Wastewater written by Olivier Thomas and published by Elsevier. This book was released on 2007-04-13 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: UV-Visible Spectrophotometry of Water and Wastewater is the first book dedicated to the use of UV spectrophotometry for water and wastewater quality monitoring. Using practical examples the reader is shown how this technique can be a source of new methods of characterization and measurement. Easy and fast to run, this simple and robust analytical technique must be considered as one of the best ways to obtain a quantitative estimation of specific or aggregate parameters (eg. Nitrate, TOC), and simultaneously qualitative information on the global composition of water and its variation.* First electronic library of UV-spectra providing data readily available for researchers and users* Provides a theoretical basis for further research in the field of spectra exploitation* Contains helpful practical applications
Download or read book Microwave Assisted Sample Preparation for Trace Element Determination written by Erico Marlon Moraes Flores and published by Elsevier. This book was released on 2020-12-28 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave-Assisted Sample Preparation for Trace Element Analysis, Second Edition, describes the principles, equipment, and applications involved in sample preparation with microwaves for detecting and analyzing trace elements. Hot topics such as sample preparation for speciation, metabolomics, and halogen determination, as well as the alternatives of sample preparation for special samples (for example, carbon nanotubes, polymers, petroleum products), are also discussed. This completely updated second edition covers all the new devices and more powerful systems that have emerged in the last several years, such as Ultrawave and Ultraclave systems. New challenges in the fields of geology, environmental and biological studies -for example, the need for further determination of rare earth elements and halogens - are currently only covered in scientific journals and not in a comprehensive way. This book offers a summary of the state-of-the-art ways to meet these challenges with microwave-assisted sample preparation. The only book to cover in depth the principles, equipment, and applications of microwave-assisted sample preparation Written by experts in the field who provide a comprehensive overview of the important concepts Introduces the latest devices and systems used for in microwave-assisted techniques, including Ultrawave and Ultraclave systems
