Download or read book Identification of Multivariable Industrial Processes written by Yucai Zhu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification of Multivariable Industrial Processes presents a unified approach to multivariable industrial process identification. It concentrates on industrial processes with reference to model applications. The areas covered are experiment design, model structure selection, parameter estimation as well as error bounds of the transfer function. This publication is intended to fill the gap between modern systems and control theory and industrial application. It is based on the results of 10 years of research and application experiences. The theories and models discussed are fully explained and illustrated with case studies. At an early stage the reader is introduced to real applications.
Download or read book Identification of Multivariable Industrial Processes written by Yucai Zhu and published by . This book was released on 1993-05-28 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multivariable System Identification For Process Control written by Y. Zhu and published by Elsevier. This book was released on 2001-10-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and control theory has experienced significant development in the past few decades. New techniques have emerged which hold enormous potential for industrial applications, and which have therefore also attracted much interest from academic researchers. However, the impact of these developments on the process industries has been limited.The purpose of Multivariable System Identification for Process Control is to bridge the gap between theory and application, and to provide industrial solutions, based on sound scientific theory, to process identification problems. The book is organized in a reader-friendly way, starting with the simplest methods, and then gradually introducing more complex techniques. Thus, the reader is offered clear physical insight without recourse to large amounts of mathematics. Each method is covered in a single chapter or section, and experimental design is explained before any identification algorithms are discussed. The many simulation examples and industrial case studies demonstrate the power and efficiency of process identification, helping to make the theory more applicable. MatlabTM M-files, designed to help the reader to learn identification in a computing environment, are included.
Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.
Download or read book Multivariable Control of Industrial Processes and Products written by and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Configuration Selection for Multivariable Plants written by A. Khaki-Sedigh and published by Springer Science & Business Media. This book was released on 2009-09-23 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of multivariable industrial plants and processes has been a challenging and fascinating task for researchers in this field. The analysis and design methodologies for multivariable plants can be categorized as centralized and decentralized design strategies. Despite the remarkable theoretical achievements in centralized multiva- able control, decentralized control is still widely used in many industrial plants. This trend in the beginning of the third millennium is still there and it will be with us for the foreseeable future. This is mainly because of the easy implementation, main- nance, tuning, and robust behavior in the face of fault and model uncertainties, which is reported with the vast number of running decentralized controllers in the industry. The main steps involved in employing decentralized controllers can be summarized as follows: • Control objectives formulation and plant modeling. • Control structure selection. • Controller design. • Simulation or pilot plant experiments and Implementation. Nearly all the textbooks on multivariable control theory deal only with the control system analysis and design. The important concept of control structure selection which is a key prerequisite for a successful industrial control strategy is almost unnoticed. Structure selection involves the following two main steps: • Inputs and outputs selection. • Control configuration selection or the input-output pairing problem. This book focuses on control configuration selection or the input-output pairing problem, which is defined as the procedure of selecting the appropriate input and output pair for the design of SISO (or block) controllers.
Download or read book Multivariable Control Systems written by P. Albertos Pérez and published by Springer Science & Business Media. This book was released on 2004 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multivariable Control Systems focuses on control design with continual references to the practical aspects of implementation. While the concepts of multivariable control are justified, the book emphasises the need to maintain student interest and motivation over exhaustive mathematical proof. Tools of analysis and representation are always developed as methods for achieving a final control system design and evaluation. Features: • design implementation laid out using extensive reference to MATLAB®; • combined consideration of systems (plant) and signals (mainly disturbances); • step-by-step approach from the objectives of multivariable control to the solution of complete design problems. Multivariable Control Systems is an ideal text for graduate students or for final-year undergraduates looking for more depth than provided by introductory textbooks. It will also interest the control engineer practising in industry and seeking to implement robust or multivariable control solutions to plant problems.
Download or read book Industrial Process Identification written by Ai Hui Tan and published by Springer. This book was released on 2019-01-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification brings together the latest advances in perturbation signal design. It describes the approaches to the design process that are relevant to industries. The authors’ discussion of several software packages (Frequency Domain System Identification Toolbox, prs, GALOIS, multilev_new, and Input-Signal-Creator) will allow readers to understand the different designs in industries and begin designing common classes of signals. The authors include two case studies that provide a balance between the theory and practice of these designs: the identification of a direction-dependent electronic nose system; and the identification of a multivariable cooling system with time-varying delay. Major aspects of signal design such as the formulation of suitable specifications in the face of practical constraints, the classes of designs available, the various objectives necessitating separate treatments when dealing with nonlinear systems, and extension to multi-input scenarios, are discussed. Codes, including some that will produce simulated data, are included to help readers replicate the results described. Industrial Process Identification is a powerful source of information for control engineers working in the process and communications industries seeking guidance on choosing identification software tools for use in practical experiments and case studies. The book will also be of interest to academic researchers and students working in electrical, mechanical and communications engineering and the application of perturbation signal design. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Advanced Process Identification and Control written by Enso Ikonen and published by CRC Press. This book was released on 2001-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of techniques in advanced process modelling, identification, prediction, and parameter estimation for the implementation and analysis of industrial systems. The authors cover applications for the identification of linear and non-linear systems, the design of generalized predictive controllers (GPCs), and the control of multivariable systems.
Download or read book Multivariable Control for Industrial Applications written by John O'Reilly and published by IET. This book was released on 1987 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book PID Control for Multivariable Processes written by Qing-Guo Wang and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thereare richtheories and designs for generalcontrolsystems,but usually, they will not lead to PID controllers. Noting that the PID controller has been the most popular one in industry for over ?fty years, we will con?ne our discussion hereto PIDcontrolonly. PID controlhasbeenanimportantresearchtopicsince 1950’s, and causes remarkable activities for the last two decades. Most of the existing works have been on the single variable PID control and its theory and design are well established, understood and practically applied. However, most industrial processes are of multivariable nature. It is not rare that the overall multivariable PID control system could fail although each PID loop may work well. Thus,demandforaddressingmultivariableinteractionsishighforsuccessful applicationofPIDcontrolinmultivariableprocessesanditisevidentfrommajor leading control companies who all rankedthe couplings of multivariable systems as the principal common problem in industry. There have been studies on PID control for multivariable processes and they provide some useful design tools for certaincases. But itis notedthat the existing worksaremainlyfor decentralized form of PID control and based on ad hoc methodologies. Obvious, multivariable PID control is much less understood and developed in comparison with the single variable case and actual need for industrial applications. Better theory and design have to be established for multivariable PID control to reach the same maturity and popularity as the single variable case. The present monograph puts together, in a single volume, a fairly comp- hensive, up-to-date and detailed treatment of PID control for multivariable p- cesses, from paring, gain and phase margins, to various design methods and applications.
Download or read book Identification and Control of Sheet and Film Processes written by Andrew P. Featherstone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet and film processes include coating, papermaking, metal rolling, and polymer film extrusion. Products produced by these processes include paper, bumper stickers, plastic bags, windshield safety glass, and sheet metal. The total capitalization of industries that rely on these processes is well over $ 500 billion worldwide. These processes are notorious for being difficult to control. The goal of this book is to present the theoretical background and practical techniques for the identification and control of sheet and film processes. It is explained why many existing industrial control systems perform poorly for sheet and film processes. Identification and control algorithms are described and illustrated which provide consistent and reliable product quality. These algorithms include an experimental design technique that ensures that informative data are collected during input-output experimentation, model identification techniques that produce a process model and an estimate of its accuracy, and control techniques that take into account actuator constraints as well as robustness to model uncertainties. The algorithms covered in this book are truly the state of the art. Variations on some of the algorithms have been implemented on industrial sheet and film processes. Other algorithms are in various stages of implementation. All of the algorithms have been applied to realistic simulation models constructed from industrial plant data; many of these studies are included in this book.
Download or read book Multivariable and Closed Loop Process Identification for MPC written by Yucai Zhu and published by . This book was released on 1999 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supervision and Control for Industrial Processes written by Bjorn Sohlberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The steel industry world-wide is highly competitive and there is significant research in progress to ensure competitive success prevails in the various companies. From an engineering viewpoint, this means the use of increasingly sophisticated techniques and state-of-the-art theory to optimise process throughput and deliver ever more exacting dimensional and material property specifications. Dr. Bjöm Sohlberg's monograph demonstrates this interplay between fundamental control engineering science and the demands of a particular applications project in the steel strip production business. It is an excellent piece of work which clearly shows how these industrial engineering challenges can be formulated and solved.
Download or read book Identification of Industrial Processes written by Naum Samoĭlovich Raĭbman and published by . This book was released on 1980 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification and System Parameter Estimation 1982 written by G. A. Bekey and published by Elsevier. This book was released on 2016-06-06 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification and System Parameter Estimation 1982 covers the proceedings of the Sixth International Federation of Automatic Control (IFAC) Symposium. The book also serves as a tribute to Dr. Naum S. Rajbman. The text covers issues concerning identification and estimation, such as increasing interrelationships between identification/estimation and other aspects of system theory, including control theory, signal processing, experimental design, numerical mathematics, pattern recognition, and information theory. The book also provides coverage regarding the application and problems faced by several engineering and scientific fields that use identification and estimation, such as biological systems, traffic control, geophysics, aeronautics, robotics, economics, and power systems. Researchers from all scientific fields will find this book a great reference material, since it presents topics that concern various disciplines.
