Download or read book Identification of Dynamic Systems written by North Atlantic Treaty Organization and published by . This book was released on 1994 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification of Dynamic Systems Nonlinear analysis and manoeuvre design written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Pt. 1 examines the practical application of parameter estimation methodology to the problem of estimating aircraft stability and control derivatives from flight test data. The primary purpose is to present a comprehensive and unified picture of the entire parameter estimation process and its integration into a flight test program. Pt. 2 covers areas such as flight path reconstruction, nonlinear model identification, optimal input design and flight test instrumentation. This approach is referred to as the Two-Step Method (TSM), also known as Estimation Before Modelling (EBM) in the literature. It will be shown that this approach has significant practical advantages over methods which no attempt is made to decompose the joint parameter-state estimation problem. The two-step method is generally applicable to flight vehicles such as fixed wing aircraft and rotorcraft which are equipped with state of the art inertial reference systems.
Download or read book AGARD Flight Test Techniques Series written by J.A.. Mulder and published by . This book was released on 1994 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Systems written by Dongbin Lee and published by BoD – Books on Demand. This book was released on 2016-10-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists mainly of two parts: Chapter 1 - Chapter 7 and Chapter 8 - Chapter 14. Chapter 1 and Chapter 2 treat design techniques based on linearization of nonlinear systems. An analysis of nonlinear system over quantum mechanics is discussed in Chapter 3. Chapter 4 to Chapter 7 are estimation methods using Kalman filtering while solving nonlinear control systems using iterative approach. Optimal approaches are discussed in Chapter 8 with retarded control of nonlinear system in singular situation, and Chapter 9 extends optimal theory to H-infinity control for a nonlinear control system.Chapters 10 and 11 present the control of nonlinear dynamic systems, twin-rotor helicopter and 3D crane system, which are both underactuated, cascaded dynamic systems. Chapter 12 applies controls to antisynchronization/synchronization in the chaotic models based on Lyapunov exponent theorem, and Chapter 13 discusses developed stability analytic approaches in terms of Lyapunov stability. The analysis of economic activities, especially the relationship between stock return and economic growth, is presented in Chapter 14.
Download or read book Identification of Dynamic Systems written by Rolf Isermann and published by Springer. This book was released on 2014-11-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.
Download or read book Applications of Nonlinear Dynamics written by Visarath In and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?eld of applied nonlinear dynamics has attracted scientists and engineers across many different disciplines to develop innovative ideas and methods to study c- plex behavior exhibited by relatively simple systems. Examples include: population dynamics, ?uidization processes, applied optics, stochastic resonance, ?ocking and ?ightformations,lasers,andmechanicalandelectricaloscillators. Acommontheme among these and many other examples is the underlying universal laws of nonl- ear science that govern the behavior, in space and time, of a given system. These laws are universal in the sense that they transcend the model-speci?c features of a system and so they can be readily applied to explain and predict the behavior of a wide ranging phenomena, natural and arti?cial ones. Thus the emphasis in the past decades has been in explaining nonlinear phenomena with signi?cantly less att- tion paid to exploiting the rich behavior of nonlinear systems to design and fabricate new devices that can operate more ef?ciently. Recently, there has been a series of meetings on topics such as Experimental Chaos, Neural Coding, and Stochastic Resonance, which have brought together many researchers in the ?eld of nonlinear dynamics to discuss, mainly, theoretical ideas that may have the potential for further implementation. In contrast, the goal of the 2007 ICAND (International Conference on Applied Nonlinear Dynamics) was focused more sharply on the implementation of theoretical ideas into actual - vices and systems.
Download or read book Modelling and Parameter Estimation of Dynamic Systems written by J.R. Raol and published by IET. This book was released on 2004-08-13 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed examination of the estimation techniques and modeling problems. The theory is furnished with several illustrations and computer programs to promote better understanding of system modeling and parameter estimation.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification Des Syst mes Pour Le D veloppement Int gr Des A ronefs Et Les Essais en Vol written by and published by . This book was released on 1999 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Dynamic Systems written by C. Nelson Dorny and published by . This book was released on 1993 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook that embraces the whole of engineering in a unified context, promoting system thinking by breaking down unnecessary barriers between disciplines. The six chapters address design insights, lumped-network models of systems, lumped-network behavior, equivalence and superposition in linear networks, frequency-response models, and coupling devices. The author uses the text for a two- semester first course in engineering; it has also been used as an integrative course for seniors, primarily in mechanical engineering. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Nonlinear Systems written by Christos K. Volos and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A non-linear system is a set of nonlinear equations, which may be algebraic, ordinary differential, partial differential, fractional, integral or a combination of these. Especially, nowadays, the term dynamical system is used as a synonym of nonlinear systems where the nonlinear equations represent the evolution of a solution over time. So, the notion of dynamical systems arose following the name of equations governing the motion of a system of particles, even though the nonlinear system may have no application to mechanics. Also, from an engineering point of view a nonlinear system may be represented with a feedback loop in which the output of an element is not proportional to its input. Over the last few decades, nonlinear systems have been used to describe a great variety of phenomena, in social and life sciences as well as in physical sciences and engineering. The theory of nonlinear systems has applications to problems of population growth, economics, chemical reactions, celestial mechanics, physiology of nerves, onset of turbulence, regulation of heartbeats, electronic circuits, cryptography, secure communications and many others. Nonlinear dynamical systems, which present chaotic behaviour, are of great importance due to their applications in science and engineering. Chaotic systems are nonlinear dynamical systems and maps that are highly sensitive to initial conditions. The sensitivity of initial conditions is usually called the butterfly effect for dynamical systems and maps. So, nowadays the design and analysis of nonlinear systems and especially chaotic systems has gained the interest of the research community due to the fact that many phenomena on financial, physical, biological, chemical, mechanical and engineering systems can be modelled and studied through the perspective of non-linear dynamics. These nonlinear systems can be modelled by discrete-time or continuous-time mathematical models. This book aims to bridge the gap between the design/analysis and applications, which are the two research stages on the progress of nonlinear systems and also which open up some new directions of real applications, where chaos can be put up to technological use, including secure communication systems, electronic circuits design, memristors and radar. Finally, this book can serve as an updated and handy reference for university professors, graduate students, laboratory researchers as well as physicists and applied mathematicians who are interested in studying the chaos and its applications through the field of nonlinear systems.
Download or read book Aeronautical Engineering A Cumulative Index to a Continuing Bibliography supplement 325 written by and published by . This book was released on 1995 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear System Identification Input Output Modeling Approach written by Robert Haber and published by Springer. This book was released on 2012-12-22 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of the book is to present the modeling, parameter estimation and other aspects of the identification of nonlinear dynamic systems. The treatment is restricted to the input-output modeling approach. Because of the widespread usage of digital computers discrete time methods are preferred. Time domain parameter estimation methods are dealt with in detail, frequency domain and power spectrum procedures are described shortly. The theory is presented from the engineering point of view, and a large number of examples of case studies on the modeling and identifications of real processes illustrate the methods. Almost all processes are nonlinear if they are considered not merely in a small vicinity of the working point. To exploit industrial equipment as much as possible, mathematical models are needed which describe the global nonlinear behavior of the process. If the process is unknown, or if the describing equations are too complex, the structure and the parameters can be determined experimentally, which is the task of identification. The book is divided into seven chapters dealing with the following topics: 1. Nonlinear dynamic process models 2. Test signals for identification 3. Parameter estimation methods 4. Nonlinearity test methods 5. Structure identification 6. Model validity tests 7. Case studies on identification of real processes Chapter I summarizes the different model descriptions of nonlinear dynamical systems.
Download or read book Modeling and Identification of Nonlinear Dynamic Systems written by Hassan Sassi and published by . This book was released on 1982 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Systems written by and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on several key aspects of nonlinear systems including dynamic modeling, state estimation, and stability analysis. It is intended to provide a wide range of readers in applied mathematics and various engineering disciplines an excellent survey of recent studies of nonlinear systems. With its thirteen chapters, the book brings together important contributions from renowned international researchers to provide an excellent survey of recent studies of nonlinear systems. The first section consists of eight chapters that focus on nonlinear dynamic modeling and analysis techniques, while the next section is composed of five chapters that center on state estimation methods and stability analysis for nonlinear systems.
Download or read book AGARD Conference Proceedings written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1995 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Aerospace Guidance Navigation and Control written by Bogusław Dołęga and published by Springer. This book was released on 2017-12-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first three CEAS (Counsil of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011, in Delft, Netherlands in 2013 and in Toulouse, France in 2017. The Warsaw University of Technology (WUT) and the Rzeszow University of Technology (RzUT) accepted the challenge of jointly organizing the 4th edition. The conference aims to promote scientific and technical excellence in the fields of Guidance, Navigation and Control (GNC) in aerospace and other fields of technology. The Conference joins together the industry with the academia research. This book covers four main topics: Guidance and Control, Control Theory Application, Navigation, UAV Control and Dynamic. The papers included focus on the most advanced and actual topics in guidance, navigation and control research areas: · Control theory, analysis, and design · ; Novel navigation, estimation, and tracking methods · Aircraft, spacecraft, missile and UAV guidance, navigation, and control · Flight testing and experimental results · Intelligent control in aerospace applications · Aerospace robotics and unmanned/autonomous systems · Sensor systems for guidance, navigation and control · Guidance, navigation, and control concepts in air traffic control systems For the 4th CEAS Specialist Conference on Guidance, Navigation and Control the International Technical Committee established a formal review process. Each paper was reviewed in compliance with good journal practices by independent and anonymous reviewers. At the end of the review process papers were selected for publication in this book.
