Download or read book Identification of Continuous time Models from Sampled Data written by Hugues Garnier and published by Springer Science & Business Media. This book was released on 2008-03-13 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to direct continuous-time model identification for 15 years. It cuts down on time spent hunting through journals by providing an overview of much recent research in an increasingly busy field. The CONTSID toolbox discussed in the final chapter gives an overview of developments and practical examples in which MATLAB® can be used for direct time-domain identification of continuous-time systems. This is a valuable reference for a broad audience.
Download or read book Identification of Continuous time Models from Sampled Data written by Hugues Garnier and published by Springer. This book was released on 2009-10-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to direct continuous-time model identification for 15 years. It cuts down on time spent hunting through journals by providing an overview of much recent research in an increasingly busy field. The CONTSID toolbox discussed in the final chapter gives an overview of developments and practical examples in which MATLAB® can be used for direct time-domain identification of continuous-time systems. This is a valuable reference for a broad audience.
Download or read book Identification of Continuous Time Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the importance of system identification, the International Federation of Automatic Control (IFAC) and the International Federation of Operational Research Societies (IFORS) hold symposia on this topic every three years. Interest in continuous time approaches to system identification has been growing in recent years. This is evident from the fact that the of invited sessions on continuous time systems has increased from one in the 8th number Symposium that was held in Beijing in 1988 to three in the 9th Symposium in Budapest in 1991. It was during the 8th Symposium in August 1988 that the idea of bringing together important results on the topic of Identification of continuous time systems was conceived. Several distinguished colleagues, who were with us in Beijing at that time, encouraged us by promising on the spot to contribute to a comprehensive volume of collective work. Subsequently, we contacted colleagues all over the world, known for their work in this area, with a formal request to contribute to the proposed volume. The response was prompt and overwhelmingly encouraging. We sincerely thank all the authors for their valuable contributions covering various aspects of identification of continuous time systems.
Download or read book Identification of Linear and Nonlinear Continuous Time Models from Sampled Data Sets written by K. M. Tsang and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification of Continuous Systems written by Heinz Unbehauen and published by . This book was released on 1987 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together important advances in the field of continuous system identification, this book deals with both parametric and nonparametric methods. It pays special attention to the problem of retaining continuous model parameters in the estimation equations, to which all the existing techniques used in estimating discrete models may be applied. It is aimed at both the academic researcher and the control engineer in industry. The techniques covered range from certain simple numerical or graphical methods applicable to some of the frequently encountered model forms, to attractive recursive algorithms for continuous model identification suitable for real time implementation. These include the recent methods based on orthogonal functions such as those of Walsh and Poisson moment functionals. Some techniques based on stable model adaptation principles are also presented and illustrated.
Download or read book Sampled Data Models for Linear and Nonlinear Systems written by Juan I. Yuz and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sampled-data Models for Linear and Nonlinear Systems provides a fresh new look at a subject with which many researchers may think themselves familiar. Rather than emphasising the differences between sampled-data and continuous-time systems, the authors proceed from the premise that, with modern sampling rates being as high as they are, it is becoming more appropriate to emphasise connections and similarities. The text is driven by three motives: · the ubiquity of computers in modern control and signal-processing equipment means that sampling of systems that really evolve continuously is unavoidable; · although superficially straightforward, sampling can easily produce erroneous results when not treated properly; and · the need for a thorough understanding of many aspects of sampling among researchers and engineers dealing with applications to which they are central. The authors tackle many misconceptions which, although appearing reasonable at first sight, are in fact either partially or completely erroneous. They also deal with linear and nonlinear, deterministic and stochastic cases. The impact of the ideas presented on several standard problems in signals and systems is illustrated using a number of applications. Academic researchers and graduate students in systems, control and signal processing will find the ideas presented in Sampled-data Models for Linear and Nonlinear Systems to be a useful manual for dealing with sampled-data systems, clearing away mistaken ideas and bringing the subject thoroughly up to date. Researchers in statistics and economics will also derive benefit from the reworking of ideas relating a model derived from data sampling to an original continuous system.
Download or read book Optimal Sampled Data Control Systems written by Tongwen Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the many techniques for designing linear multivariable analogue controllers, the two most popular optimal ones are H2 and H-infinity optimization. The fact that most new industrial controllers are digital provides strong motivation for adapting or extending these techniques to digital control systems. This book, now available as a corrected reprint, attempts to do so. Part I presents two indirect methods of sampled-data controller design: These approaches include approximations to a real problem, which involves an analogue plant, continuous-time performance specifications, and a sampled-data controller. Part II proposes a direct attack in the continuous-time domain, where sampled-data systems are time-varying. The findings are presented in forms that can readily be programmed in, e.g., MATLAB.
Download or read book Identification of Dynamic Systems written by Rolf Isermann and published by Springer. This book was released on 2011-04-08 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.
Download or read book Frequency domain Identification of Continuous time Output Error Models from Sampled Data written by Jonas Gillberg and published by . This book was released on 2005 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Parameter varying System Identification written by Paulo Lopes dos Santos and published by World Scientific. This book was released on 2012 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review volume reports the state-of-the-art in Linear Parameter Varying (LPV) system identification. It focuses on the most recent LPV identification methods for both discrete-time and continuous-time models--
Download or read book Identification of Continuous Time Systems written by Allamaraju Subrahmanyam and published by CRC Press. This book was released on 2019-12-06 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models of dynamical systems are required for various purposes in the field of systems and control. The models are handled either in discrete time (DT) or in continuous time (CT). Physical systems give rise to models only in CT because they are based on physical laws which are invariably in CT. In system identification, indirect methods provide DT models which are then converted into CT. Methods of directly identifying CT models are preferred to the indirect methods for various reasons. The direct methods involve a primary stage of signal processing, followed by a secondary stage of parameter estimation. In the primary stage, the measured signals are processed by a general linear dynamic operation—computational or realized through prefilters, to preserve the system parameters in their native CT form—and the literature is rich on this aspect. In this book: Identification of Continuous-Time Systems-Linear and Robust Parameter Estimation, Allamaraju Subrahmanyam and Ganti Prasada Rao consider CT system models that are linear in their unknown parameters and propose robust methods of estimation. This book complements the existing literature on the identification of CT systems by enhancing the secondary stage through linear and robust estimation. In this book, the authors provide an overview of CT system identification, consider Markov-parameter models and time-moment models as simple linear-in-parameters models for CT system identification, bring them into mainstream model parameterization via basis functions, present a methodology to robustify the recursive least squares algorithm for parameter estimation of linear regression models, suggest a simple off-line error quantification scheme to show that it is possible to quantify error even in the absence of informative priors, and indicate some directions for further research. This modest volume is intended to be a useful addition to the literature on identifying CT systems.
Download or read book Animal Movement written by Mevin B. Hooten and published by CRC Press. This book was released on 2017-03-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of animal movement has always been a key element in ecological science, because it is inherently linked to critical processes that scale from individuals to populations and communities to ecosystems. Rapid improvements in biotelemetry data collection and processing technology have given rise to a variety of statistical methods for characterizing animal movement. The book serves as a comprehensive reference for the types of statistical models used to study individual-based animal movement. Animal Movement is an essential reference for wildlife biologists, quantitative ecologists, and statisticians who seek a deeper understanding of modern animal movement models. A wide variety of modeling approaches are reconciled in the book using a consistent notation. Models are organized into groups based on how they treat the underlying spatio-temporal process of movement. Connections among approaches are highlighted to allow the reader to form a broader view of animal movement analysis and its associations with traditional spatial and temporal statistical modeling. After an initial overview examining the role that animal movement plays in ecology, a primer on spatial and temporal statistics provides a solid foundation for the remainder of the book. Each subsequent chapter outlines a fundamental type of statistical model utilized in the contemporary analysis of telemetry data for animal movement inference. Descriptions begin with basic traditional forms and sequentially build up to general classes of models in each category. Important background and technical details for each class of model are provided, including spatial point process models, discrete-time dynamic models, and continuous-time stochastic process models. The book also covers the essential elements for how to accommodate multiple sources of uncertainty, such as location error and latent behavior states. In addition to thorough descriptions of animal movement models, differences and connections are also emphasized to provide a broader perspective of approaches.
Download or read book Identification of Continuous time Models for Linear Multivariable Dynamic Systems VIA Sampled Data written by 陳誠亮 and published by . This book was released on 1987 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous Time Modeling in the Behavioral and Related Sciences written by Kees van Montfort and published by Springer. This book was released on 2018-10-11 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an overview of continuous time modeling in the behavioral and related sciences. It argues that the use of discrete time models for processes that are in fact evolving in continuous time produces problems that make their application in practice highly questionable. One main issue is the dependence of discrete time parameter estimates on the chosen time interval, which leads to incomparability of results across different observation intervals. Continuous time modeling by means of differential equations offers a powerful approach for studying dynamic phenomena, yet the use of this approach in the behavioral and related sciences such as psychology, sociology, economics and medicine, is still rare. This is unfortunate, because in these fields often only a few discrete time (sampled) observations are available for analysis (e.g., daily, weekly, yearly, etc.). However, as emphasized by Rex Bergstrom, the pioneer of continuous-time modeling in econometrics, neither human beings nor the economy cease to exist in between observations. In 16 chapters, the book addresses a vast range of topics in continuous time modeling, from approaches that closely mimic traditional linear discrete time models to highly nonlinear state space modeling techniques. Each chapter describes the type of research questions and data that the approach is most suitable for, provides detailed statistical explanations of the models, and includes one or more applied examples. To allow readers to implement the various techniques directly, accompanying computer code is made available online. The book is intended as a reference work for students and scientists working with longitudinal data who have a Master's- or early PhD-level knowledge of statistics.
Download or read book System Identification 2003 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems*Provides the latest research on System Identification*Contains contributions written by experts in the field*Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book System Identification Environmental Modelling and Control System Design written by Liuping Wang and published by Springer Science & Business Media. This book was released on 2011-10-20 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to Prof. Peter Young on his 70th birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume comprises a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as a source of study material for graduate students in those areas.
Download or read book Recursive Estimation and Time Series Analysis written by Peter C. Young and published by Springer Science & Business Media. This book was released on 2011-08-04 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a revised version of the 1984 book of the same name but considerably modified and enlarged to accommodate the developments in recursive estimation and time series analysis that have occurred over the last quarter century. Also over this time, the CAPTAIN Toolbox for recursive estimation and time series analysis has been developed at Lancaster, for use in the MatlabTM software environment (see Appendix G). Consequently, the present version of the book is able to exploit the many computational routines that are contained in this widely available Toolbox, as well as some of the other routines in MatlabTM and its other toolboxes. The book is an introductory one on the topic of recursive estimation and it demonstrates how this approach to estimation, in its various forms, can be an impressive aid to the modelling of stochastic, dynamic systems. It is intended for undergraduate or Masters students who wish to obtain a grounding in this subject; or for practitioners in industry who may have heard of topics dealt with in this book and, while they want to know more about them, may have been deterred by the rather esoteric nature of some books in this challenging area of study.
