Download or read book Iterative Identification and Control written by P. Albertos Pérez and published by Springer Science & Business Media. This book was released on 2002-05-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exposition of the interplay between the modelling of dynamic systems and the design of feedback controllers based on these models. The authors of individual chapters are some of the most renowned and authoritative figures in the fields of system identification and control design.

Download or read book Multivariable System Identification For Process Control written by Y. Zhu and published by Elsevier. This book was released on 2001-10-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and control theory has experienced significant development in the past few decades. New techniques have emerged which hold enormous potential for industrial applications, and which have therefore also attracted much interest from academic researchers. However, the impact of these developments on the process industries has been limited.The purpose of Multivariable System Identification for Process Control is to bridge the gap between theory and application, and to provide industrial solutions, based on sound scientific theory, to process identification problems. The book is organized in a reader-friendly way, starting with the simplest methods, and then gradually introducing more complex techniques. Thus, the reader is offered clear physical insight without recourse to large amounts of mathematics. Each method is covered in a single chapter or section, and experimental design is explained before any identification algorithms are discussed. The many simulation examples and industrial case studies demonstrate the power and efficiency of process identification, helping to make the theory more applicable. MatlabTM M-files, designed to help the reader to learn identification in a computing environment, are included.

Download or read book Advanced Process Identification and Control written by Enso Ikonen and published by CRC Press. This book was released on 2001-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of techniques in advanced process modelling, identification, prediction, and parameter estimation for the implementation and analysis of industrial systems. The authors cover applications for the identification of linear and non-linear systems, the design of generalized predictive controllers (GPCs), and the control of multivariable systems.

Download or read book Adaptive Identification and Control of Uncertain Systems with Non smooth Dynamics written by Jing Na and published by Academic Press. This book was released on 2018-06-12 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Identification and Control of Uncertain Systems with Nonsmooth Dynamics reports some of the latest research on modeling, identification and adaptive control for systems with nonsmooth dynamics (e.g., backlash, dead zone, friction, saturation, etc). The authors present recent research results for the modelling and control designs of uncertain systems with nonsmooth dynamics, such as friction, dead-zone, saturation and hysteresis, etc., with particular applications in servo systems. The book is organized into 19 chapters, distributed in five parts concerning the four types of nonsmooth characteristics, namely friction, dead-zone, saturation and hysteresis, respectively. Practical experiments are also included to validate and exemplify the proposed approaches. This valuable resource can help both researchers and practitioners to learn and understand nonlinear adaptive control designs. Academics, engineers and graduate students in the fields of electrical engineering, control systems, mechanical engineering, applied mathematics and computer science can benefit from the book. It can be also used as a reference book on adaptive control for servo systems for students with some background in control engineering. - Explains the latest research outputs on modeling, identification and adaptive control for systems with nonsmooth dynamics - Provides practical application and experimental results for robotic systems, and servo motors

Download or read book Identification and Control Using Volterra Models written by F.J.III Doyle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent results in the analysis, identification and control of systems described by Volterra models. Topics covered include: qualitative behavior of finite Volterra models compared and contrasted with other nonlinear model classes, structural restrictions and extensions to Volterra model class, least squares and stochastic identification approaches, model inversion issues, and direct synthesis and model predictive control design, guidelines for practical applications. Examples are drawn from Chemical, Biological and Electrical Engineering. The book is suitable as a text for a graduate control course, or as a reference for both research and practice.

Download or read book Process Modelling Identification and Control written by Ján Mikleš and published by Springer Science & Business Media. This book was released on 2007-06-30 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact and original reference and textbook presents the most important classical and modern essentials of control engineering in a single volume. It constitutes a harmonic mixture of control theory and applications, which makes the book especially useful for students, practicing engineers and researchers interested in modeling and control of processes. Well written and easily understandable, it includes a range of methods for the analysis and design of control systems.

Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.

Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use

Download or read book Nonlinear Identification and Control written by G.P. Liu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this monograph is to give the broad aspects of nonlinear identification and control using neural networks. It uses a number of simulated and industrial examples throughout, to demonstrate the operation of nonlinear identification and control techniques using neural networks.

Download or read book Control Oriented System Identification written by Jie Chen and published by Wiley-Interscience. This book was released on 2000-06-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers system identification. Identification, in the language of control theory, is the process of obtaining a model of the object or process being controlled.

Download or read book System Identification written by Karel J. Keesman and published by Springer Science & Business Media. This book was released on 2011-05-16 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Identification shows the student reader how to approach the system identification problem in a systematic fashion. The process is divided into three basic steps: experimental design and data collection; model structure selection and parameter estimation; and model validation, each of which is the subject of one or more parts of the text. Following an introduction on system theory, particularly in relation to model representation and model properties, the book contains four parts covering: • data-based identification – non-parametric methods for use when prior system knowledge is very limited; • time-invariant identification for systems with constant parameters; • time-varying systems identification, primarily with recursive estimation techniques; and • model validation methods. A fifth part, composed of appendices, covers the various aspects of the underlying mathematics needed to begin using the text. The book uses essentially semi-physical or gray-box modeling methods although data-based, transfer-function system descriptions are also introduced. The approach is problem-based rather than rigorously mathematical. The use of finite input–output data is demonstrated for frequency- and time-domain identification in static, dynamic, linear, nonlinear, time-invariant and time-varying systems. Simple examples are used to show readers how to perform and emulate the identification steps involved in various control design methods with more complex illustrations derived from real physical, chemical and biological applications being used to demonstrate the practical applicability of the methods described. End-of-chapter exercises (for which a downloadable instructors’ Solutions Manual is available from fill in URL here) will both help students to assimilate what they have learned and make the book suitable for self-tuition by practitioners looking to brush up on modern techniques. Graduate and final-year undergraduate students will find this text to be a practical and realistic course in system identification that can be used for assessing the processes of a variety of engineering disciplines. System Identification will help academic instructors teaching control-related to give their students a good understanding of identification methods that can be used in the real world without the encumbrance of undue mathematical detail.

Download or read book Process Control and Identification written by W. Fred Ramirez and published by . This book was released on 1994 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic systems concepts. Steady state optimization. Dynamic optimization. Optimal control. The linear quadratic regulator (LQR) problem. Model predictive control. Robust control. Problems linear in the control variables. The discrete maximum principle. State and parameter identification. Sequential least squares parameter estimation. The linear quadratic Gaussian (LQG) problem.

Download or read book Fuzzy Control and Identification written by John H. Lilly and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an introduction to basic fuzzy logic and Mamdani and Takagi-Sugeno fuzzy systems. The text shows how these can be used to control complex nonlinear engineering systems, while also also suggesting several approaches to modeling of complex engineering systems with unknown models. Finally, fuzzy modeling and control methods are combined in the book, to create adaptive fuzzy controllers, ending with an example of an obstacle-avoidance controller for an autonomous vehicle using modus ponendo tollens logic.

Download or read book Identification and Control of Mechanical Systems written by Jer-Nan Juang and published by Cambridge University Press. This book was released on 2006-11-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of vibrating systems is a significant issue in the design of aircraft, spacecraft, bridges, and high-rise buildings. This book discusses the control of vibrating systems, integrating structural dynamics, vibration analysis, modern control, and system identification. By integrating these subjects engineers will need only one book, rather than several texts or courses, to solve vibration control problems. The authors cover key developments in aerospace control and identification theory, including virtual passive control, observer and state-space identification, and data-based controller synthesis. They address many practical issues and applications, and show examples of how various methods are applied to real systems. Some methods show the close integration of system identification and control theory from the state-space perspective, rather than from the traditional input-output model perspective of adaptive control. This text will be useful for advanced undergraduate and beginning graduate students in aerospace, mechanical, and civil engineering, as well as for practicing engineers.

Download or read book Modeling Identification and Control Methods in Renewable Energy Systems written by Nabil Derbel and published by Springer. This book was released on 2018-12-24 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the research and experiments in the fields of modeling and control systems have spent significant efforts to find rules from various complicated phenomena by principles, observations, measured data, logic derivations. The rules are normally summarized as concise and quantitative expressions or “models”. “Identification” provides mechanisms to establish the models and “control” provides mechanisms to improve system performances. This book reflects the relevant studies and applications in the area of renewable energies, with the latest research from interdisciplinary theoretical studies, computational algorithm development to exemplary applications. It discusses how modeling and control methods such as recurrent neural network, Pitch Angle Control, Fuzzy control, Sliding Mode Control and others are used in renewable systems. It covers topics as photovoltaic systems, wind turbines, maximum power point tracking, batteries for renewable energies, solar energy, thermal energy and so on. This book is edited and written by leading experts in the field and offers an ideal reference guide for researchers and engineers in the fields of electrical/electronic engineering, control system and energy.

Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level

Download or read book System Identification and Adaptive Control written by Yiannis Boutalis and published by Springer Science & Business. This book was released on 2014-04-23 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current trends in the development and applications of intelligent systems in engineering, this monograph focuses on recent research results in system identification and control. The recurrent neurofuzzy and the fuzzy cognitive network (FCN) models are presented. Both models are suitable for partially-known or unknown complex time-varying systems. Neurofuzzy Adaptive Control contains rigorous proofs of its statements which result in concrete conclusions for the selection of the design parameters of the algorithms presented. The neurofuzzy model combines concepts from fuzzy systems and recurrent high-order neural networks to produce powerful system approximations that are used for adaptive control. The FCN model stems from fuzzy cognitive maps and uses the notion of “concepts” and their causal relationships to capture the behavior of complex systems. The book shows how, with the benefit of proper training algorithms, these models are potent system emulators suitable for use in engineering systems. All chapters are supported by illustrative simulation experiments, while separate chapters are devoted to the potential industrial applications of each model including projects in: • contemporary power generation; • process control and • conventional benchmarking problems. Researchers and graduate students working in adaptive estimation and intelligent control will find Neurofuzzy Adaptive Control of interest both for the currency of its models and because it demonstrates their relevance for real systems. The monograph also shows industrial engineers how to test intelligent adaptive control easily using proven theoretical results.