Download or read book Introduction to IDDQ Testing written by S. Chakravarty and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing techniques for VLSI circuits are undergoing many exciting changes. The predominant method for testing digital circuits consists of applying a set of input stimuli to the IC and monitoring the logic levels at primary outputs. If, for one or more inputs, there is a discrepancy between the observed output and the expected output then the IC is declared to be defective. A new approach to testing digital circuits, which has come to be known as IDDQ testing, has been actively researched for the last fifteen years. In IDDQ testing, the steady state supply current, rather than the logic levels at the primary outputs, is monitored. Years of research suggests that IDDQ testing can significantly improve the quality and reliability of fabricated circuits. This has prompted many semiconductor manufacturers to adopt this testing technique, among them Philips Semiconductors, Ford Microelectronics, Intel, Texas Instruments, LSI Logic, Hewlett-Packard, SUN microsystems, Alcatel, and SGS Thomson. This increase in the use of IDDQ testing should be of interest to three groups of individuals associated with the IC business: Product Managers and Test Engineers, CAD Tool Vendors and Circuit Designers. Introduction to IDDQ Testing is designed to educate this community. The authors have summarized in one volume the main findings of more than fifteen years of research in this area.
Download or read book IDDQ Testing of VLSI Circuits written by Ravi K. Gulati and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power supply current monitoring to detect CMOS IC defects during production testing quietly laid down its roots in the mid-1970s. Both Sandia Labs and RCA in the United States and Philips Labs in the Netherlands practiced this procedure on their CMOS ICs. At that time, this practice stemmed simply from an intuitive sense that CMOS ICs showing abnormal quiescent power supply current (IDDQ) contained defects. Later, this intuition was supported by data and analysis in the 1980s by Levi (RACD, Malaiya and Su (SUNY-Binghamton), Soden and Hawkins (Sandia Labs and the University of New Mexico), Jacomino and co-workers (Laboratoire d'Automatique de Grenoble), and Maly and co-workers (Carnegie Mellon University). Interest in IDDQ testing has advanced beyond the data reported in the 1980s and is now focused on applications and evaluations involving larger volumes of ICs that improve quality beyond what can be achieved by previous conventional means. In the conventional style of testing one attempts to propagate the logic states of the suspended nodes to primary outputs. This is done for all or most nodes of the circuit. For sequential circuits, in particular, the complexity of finding suitable tests is very high. In comparison, the IDDQ test does not observe the logic states, but measures the integrated current that leaks through all gates. In other words, it is like measuring a patient's temperature to determine the state of health. Despite perceived advantages, during the years that followed its initial announcements, skepticism about the practicality of IDDQ testing prevailed. The idea, however, provided a great opportunity to researchers. New results on test generation, fault simulation, design for testability, built-in self-test, and diagnosis for this style of testing have since been reported. After a decade of research, we are definitely closer to practice.
Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2004-12-15 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.
Download or read book Iddq Testing for CMOS VLSI written by Rochit Rajsuman and published by Artech House Publishers. This book was released on 1995 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses in detail the correlation between physical defects and logic faults, and shows you how Iddq testing locates these defects. The book provides planning guidelines and optimization methods and is illustrated with numerous examples ranging from simple circuits to extensive case studies.
Download or read book Microelectronics Failure Analysis written by EDFAS Desk Reference Committee and published by ASM International. This book was released on 2011 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.
Download or read book ISTFA 1997 International Symposium for Testing and Failure Analysis written by Grace M. Davidson and published by ASM International. This book was released on 1997-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing of Digital Systems written by N. K. Jha and published by Cambridge University Press. This book was released on 2003-05-08 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: Device testing represents the single largest manufacturing expense in the semiconductor industry, costing over $40 billion a year. The most comprehensive and wide ranging book of its kind, Testing of Digital Systems covers everything you need to know about this vitally important subject. Starting right from the basics, the authors take the reader through automatic test pattern generation, design for testability and built-in self-test of digital circuits before moving on to more advanced topics such as IDDQ testing, functional testing, delay fault testing, memory testing, and fault diagnosis. The book includes detailed treatment of the latest techniques including test generation for various fault models, discussion of testing techniques at different levels of integrated circuit hierarchy and a chapter on system-on-a-chip test synthesis. Written for students and engineers, it is both an excellent senior/graduate level textbook and a valuable reference.
Download or read book Component Reliability for Electronic Systems written by Titu I. Băjenescu and published by Artech House. This book was released on 2010 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main reason for the premature breakdown of today's electronic products (computers, cars, tools, appliances, etc.) is the failure of the components used to build these products. Today professionals are looking for effective ways to minimize the degradation of electronic components to help ensure longer-lasting, more technically sound products and systems. This practical book offers engineers specific guidance on how to design more reliable components and build more reliable electronic systems. Professionals learn how to optimize a virtual component prototype, accurately monitor product reliability during the entire production process, and add the burn-in and selection procedures that are the most appropriate for the intended applications. Moreover, the book helps system designers ensure that all components are correctly applied, margins are adequate, wear-out failure modes are prevented during the expected duration of life, and system interfaces cannot lead to failure.
Download or read book Models in Hardware Testing written by Hans-Joachim Wunderlich and published by Springer Science & Business Media. This book was released on 2009-11-12 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model based testing is the most powerful technique for testing hardware and software systems. Models in Hardware Testing describes the use of models at all the levels of hardware testing. The relevant fault models for nanoscaled CMOS technology are introduced, and their implications on fault simulation, automatic test pattern generation, fault diagnosis, memory testing and power aware testing are discussed. Models and the corresponding algorithms are considered with respect to the most recent state of the art, and they are put into a historical context by a concluding chapter on the use of physical fault models in fault tolerance.
Download or read book Elements of STIL written by Gregory A. Maston and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard • Test In. terface ____________________ Language So I was wrong. I was absolutely sure that by having an IEEE Standard defined, reviewed, and accepted, that I wouldn't need to write a book about it as well. The Standard would be the complete reference. And be aware - this book does not serve as a replacement to the IEEE Std. 1450 document. You should have a copy of the Standard as you go through this book. I realized that the Standard would not be the complete reference, about the time that the Working Group started to put notes into the draft proposa- notes to elaborate decisions in the Working Group, but that would be removed in the final draft. Then, once the Standard was accepted I became the central point of contact for people who just picked up the Standard, who didn't have the benefit of the Working Group discussions, who only had available that one final sentence in the Standard and who didn't benefit from the perspective of where those words came from. Sometimes those questions have resulted in clarifications to the Standard. Sometimes I would respond to those questions with more background and perspective as well. It is this additional background and perspective I hope you find in this book.
Download or read book Power Aware Testing and Test Strategies for Low Power Devices written by Patrick Girard and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing the power consumption of circuits and systems is now considered one of the most important challenges for the semiconductor industry. Elaborate power management strategies, such as dynamic voltage scaling, clock gating or power gating techniques, are used today to control the power dissipation during functional operation. The usage of these strategies has various implications on manufacturing test, and power-aware test is therefore increasingly becoming a major consideration during design-for-test and test preparation for low power devices. This book explores existing solutions for power-aware test and design-for-test of conventional circuits and systems, and surveys test strategies and EDA solutions for testing low power devices.
Download or read book Defect Oriented Testing for CMOS Analog and Digital Circuits written by Manoj Sachdev and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect oriented testing is expected to play a significant role in coming generations of technology. Smaller feature sizes and larger die sizes will make ICs more sensitive to defects that can not be modeled by traditional fault modeling approaches. Furthermore, with increased level of integration, an IC may contain diverse building blocks. Such blocks include, digital logic, PLAs, volatile and non-volatile memories, and analog interfaces. For such diverse building blocks, traditional fault modeling and test approaches will become increasingly inadequate. Defect oriented testing methods have come a long way from a mere interesting academic exercise to a hard industrial reality. Many factors have contributed to its industrial acceptance. Traditional approaches of testing modern integrated circuits (ICs) have been found to be inadequate in terms of quality and economics of test. In a globally competitive semiconductor market place, overall product quality and economics have become very important objectives. In addition, electronic systems are becoming increasingly complex and demand components of highest possible quality. Testing, in general and, defect oriented testing, in particular, help in realizing these objectives. Defect Oriented Testing for CMOS Analog and Digital Circuits is the first book to provide a complete overview of the subject. It is essential reading for all design and test professionals as well as researchers and students working in the field. `A strength of this book is its breadth. Types of designs considered include analog and digital circuits, programmable logic arrays, and memories. Having a fault model does not automatically provide a test. Sometimes, design for testability hardware is necessary. Many design for testability ideas, supported by experimental evidence, are included.' ... from the Foreword by Vishwani D. Agrawal
Download or read book Istfa 98 written by ASM International and published by ASM International. This book was released on 1998-01-01 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISTFA 2019 Proceedings of the 45th International Symposium for Testing and Failure Analysis written by and published by ASM International. This book was released on 2019-12-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme for the 2019 conference is Novel Computing Architectures. Papers will include discussions on the advent of Artificial Intelligence and the promise of quantum computing that are driving disruptive computing architectures; Neuromorphic chip designs on one hand, and Quantum Bits on the other, still in R&D, will introduce new computing circuitry and memory elements, novel materials, and different test methodologies. These novel computing architectures will require further innovation which is best achieved through a collaborative Failure Analysis community composed of chip manufacturers, tool vendors, and universities.
Download or read book Integrated Circuit Test Engineering written by Ian A. Grout and published by Springer Science & Business Media. This book was released on 2005-08-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the book and the software provided with it, the reader can build his/her own tester arrangement to investigate key aspects of analog-, digital- and mixed system circuits Plan of attack based on traditional testing, circuit design and circuit manufacture allows the reader to appreciate a testing regime from the point of view of all the participating interests Worked examples based on theoretical bookwork, practical experimentation and simulation exercises teach the reader how to test circuits thoroughly and effectively
Download or read book Thermal Testing of Integrated Circuits written by J. Altet and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature has been always considered as an appreciable magnitude to detect failures in electric systems. In this book, the authors present the feasibility of considering temperature as an observable for testing purposes, with full coverage of the state of the art.
Download or read book VLSI Design written by Dr. M. Nagabushanam and published by Sankalp Publication. This book was released on with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: N/A
