Download or read book ICP Design Methods for Driven Piles in Sands and Clays written by Richard Jardine and published by Thomas Telford Limited. This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadening the recommendations published by Jardine and Chow in 1996, this volume provides procedures that can be applied by geotechnical engineers, supported by worked examples for sands and clays. It also offers guidance on application to a range of pile types, geotechnical profiles and loading conditions.

Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off

Download or read book Frontiers in Offshore Geotechnics II written by Susan Gourvenec and published by CRC Press. This book was released on 2010-10-04 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics II comprises the Proceedings of the Second International Symposium on Frontiers in Offshore Geotechnics (ISFOG), organised by the Centre for Offshore Foundation Systems (COFS) and held at the University of Western Australia (UWA), Perth from 8 10 November 2010. The volume addresses current and emerging challenges

Download or read book Frontiers in Offshore Geotechnics written by Susan Gourvenec and published by CRC Press. This book was released on 2005-10-13 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses current and emerging challenges facing those working in offshore construction, design and research. Keynote papers from leading industry practitioners and academics provide a comprehensive overview of central topics covering deepwater anchoring, pipelines, foundation solutions for offshore wind turbines, site investigation, geoh

Download or read book ICP Design Methods for Driven Piles in Sands and Clays written by Richard Jardine and published by . This book was released on 2005 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aiming to broaden the recommendations, this work provides procedures that can be applied by geotechnical engineers supported by worked examples for sands and clays. It offers guidance on application to a range of pile types, geotechnical profiles and loading conditions, and discusses the methods' theoretical and practical advantages.

Download or read book Characterization and Behavior of Interfaces written by J. David Frost and published by IOS Press. This book was released on 2010 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces exist in every geotechnical system in many forms and at multiple scales. Although historically, they are often considered to be the weak link in a system, particularly as the result of a number of unexpected catastrophic failures, new insight gained over the past twenty years by researchers around the world has shown that it is possible to select combinations of materials and design an engineered interface so that it is at least as strong as the surrounding materials. These new insights have been gained as a result of experimental study, numerical modeling and analytical investigation of successful and failed systems. While individual technical papers have been presented and/or published in various forums and proceedings over the years, no technical event has ever been convened for the sole purpose of allowing for exchange of information and ideas pertaining to geotechnical interfaces. The research symposium held in September 2008 in Atlanta Georgia, USA, in conjunction with the Fourth International Symposium on Deformation Characteristics of Geomaterials (IS Atlanta 2008) at the Georgia Institute of Technology on The Characterization and Behavior of Interfaces addressed this deficiency and the papers presented at that event are contained in this publication. IOS Press is an international science, technical and medical publisher of high-quality books for academics, scientists, and professionals in all fields. Some of the areas we publish in: -Biomedicine -Oncology -Artificial intelligence -Databases and information systems -Maritime engineering -Nanotechnology -Geoengineering -All aspects of physics -E-governance -E-commerce -The knowledge economy -Urban studies -Arms control -Understanding and responding to terrorism -Medical informatics -Computer Sciences

Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 2430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Download or read book Pile Design and Construction Practice written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an

Download or read book Offshore Geotechnical Engineering written by Mark Randolph and published by CRC Press. This book was released on 2017-07-12 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design practice in offshore geotechnical engineering has grown out of onshore practice, but the two application areas have tended to diverge over the last thirty years, driven partly by the scale of the foundation and anchoring elements used offshore, and partly by fundamental differences in construction and installation techniques. As a consequence offshore geotechnical engineering has grown as a speciality. The structure of Offshore Geotechnical Engineering follows a pattern that mimics the flow of a typical offshore project. In the early chapters it provides a brief overview of the marine environment, offshore site investigation techniques and interpretation of soil behaviour. It proceeds to cover geotechnical design of piled foundations, shallow foundations and anchoring systems. Three topics are then covered which require a more multi-disciplinary approach: the design of mobile drilling rigs, pipelines and geohazards. This book serves as a framework for undergraduate and postgraduate courses, and will appeal to professional engineers specialising in the offshore industry.

Download or read book Physical Modelling in Geotechnics Volume 2 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Download or read book Model Uncertainties in Foundation Design written by Chong Tang and published by CRC Press. This book was released on 2021-03-16 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.

Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.

Download or read book Design of Piles Under Cyclic Loading written by Alain Puech and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.

Download or read book Challenges and Innovations in Geomechanics written by Marco Barla and published by Springer Nature. This book was released on 2021-01-14 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational geomechanics, as presented by international researchers and engineers at the 16th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG 2020/21). Contributions include a wide range of topics in geomechanics such as: monitoring and remote sensing, multiphase modelling, reliability and risk analysis, surface structures, deep structures, dams and earth structures, coastal engineering, mining engineering, earthquake and dynamics, soil-atmosphere interaction, ice mechanics, landfills and waste disposal, gas and petroleum engineering, geothermal energy, offshore technology, energy geostructures, geomechanical numerical models and computational rail geotechnics.

Download or read book Installation Effects in Geotechnical Engineering written by Michael A. Hicks and published by CRC Press. This book was released on 2013-03-05 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Installation effects in geotechnical engineering contains the proceedings of the International Conference on Installation Effects in Geotechnical Engineering (Rotterdam, The Netherlands, 24-27 March 2013), the closing conference of GEO-INSTALL (FP7/2007-2013, PIAG-GA-2009-230638), an Industry-Academia Pathways and Partnerships project funded by the

Download or read book Proceedings of the 5th International Young Geotechnical Engineers Conference written by IOS Press and published by IOS Press. This book was released on 2013-08-20 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical engineers are at work worldwide, contributing to sustainable living and to the creation of safe, economic and pleasant spaces to live, work and relax. With increased pressure on space and resources, particularly in cities, their expertise becomes ever more important. This book presents the proceedings of the 5th iYGEC, International Young Geotechnical Engineers' Conference, held at Marne-la-Vallée, France, from 31 August to 1 September 2013. It is also the second volume in the series Advances in Soil Mechanics and Geotechnical Engineering. The papers included here cover topics such as laboratory and field testing, geology and groundwater, earthworks, soil behavior, constitutive modeling, ground improvement, earthquake, retaining structures, foundations, slope stability, tunnels and observational methods. The iYGEC conference series brings together students and young people at the start of their career in the geotechnical professions to share their experience, and this book will be of interest to all those whose work involves soil mechanics and geotechnical engineering. The cover shows Dieppe harbour breakwater project, Louis-Alexandre de Cessart, 1776-1777. © École Nationale des Ponts et Chaussées.