Download or read book ICE Manual of Construction Materials Metals and alloys Polymers Polymer fibre composites in civil engineering Timber Glass Non conventional materials Appendices written by M. C. Forde and published by . This book was released on 2009 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set comprises the following five titles: ICE Manual of Project Management; ICE Manual of Geotechnical Engineering; ICE Manual of Highway Design and Management; ICE Manual of Health and Safety in Construction and ICE Manual of Construction Materials.
Download or read book ICE Manual of Construction Materials written by Mike Forde and published by . This book was released on 2009 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set comprises the following five titles: ICE Manual of Project Management; ICE Manual of Geotechnical Engineering; ICE Manual of Highway Design and Management; ICE Manual of Health and Safety in Construction and ICE Manual of Construction Materials.
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Materials for Civil and Construction Engineers Pearson New International Edition written by Michael S. Mamlouk and published by Pearson Higher Ed. This book was released on 2013-08-27 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Civil Engineering Materials, Construction Materials, and Construction Methods and Materials offered in Civil, Environmental, or Construction engineering departments. This introduction gives students a basic understanding of the material selection process and the behavior of materials — a fundamental requirement for all civil and construction engineers performing design, construction, and maintenance. The authors cover the various materials used by civil and construction engineers in one useful reference, limiting the vast amount of information available to the introductory level, concentrating on current practices, and extracting information that is relevant to the general education of civil and construction engineers. A large number of experiments, figures, sample problems, test methods, and homework problems gives students opportunity for practice and review.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book ICE Manual of Construction Materials written by M. C. Forde and published by Thomas Telford Publishing. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set comprises the following five titles: ICE Manual of Project Management; ICE Manual of Geotechnical Engineering; ICE Manual of Highway Design and Management; ICE Manual of Health and Safety in Construction and ICE Manual of Construction Materials.
Download or read book Mechanics of Composite Materials written by Autar K. Kaw and published by CRC Press. This book was released on 2005-11-02 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1997, Dr. Kaw introduced the first edition of Mechanics of Composite Materials, receiving high praise for its comprehensive scope and detailed examples. He also introduced the groundbreaking PROMAL software, a valuable tool for designing and analyzing structures made of composite materials. Updated and expanded to reflect recent advances in the
Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications Highly visual full color graphics facilitate understanding of materials concepts and properties Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: Text and figures have been revised and updated throughout The number of worked examples has been increased by 50% The number of standard end-of-chapter exercises in the text has been doubled Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology
Download or read book Composite Materials Engineering Volume 1 written by Xiao-Su Yi and published by Springer. This book was released on 2017-11-02 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of two volumes providing comprehensive coverage of the fundamental knowledge and technology of composite materials. It covers a variety of design, fabrication and characterization methods as applied to composite materials, particularly focusing on the fiber-reinforcement mechanism and related examples. It is ideal for graduate students, researchers, and professionals in the fields of Materials Science and Engineering, and Mechanical Engineering.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Construction Materials written by Peter Domone and published by CRC Press. This book was released on 2018-10-03 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: So far in the twenty-first century, there have been many developments in our understanding of materials’ behaviour and in their technology and use. This new edition has been expanded to cover recent developments such as the use of glass as a structural material. It also now examines the contribution that material selection makes to sustainable construction practice, considering the availability of raw materials, production, recycling and reuse, which all contribute to the life cycle assessment of structures. As well as being brought up-to-date with current usage and performance standards, each section now also contains an extra chapter on recycling. Covers the following materials: metals concrete ceramics (including bricks and masonry) polymers fibre composites bituminous materials timber glass. This new edition maintains our familiar and accessible format, starting with fundamental principles and continuing with a section on each of the major groups of materials. It gives you a clear and comprehensive perspective on the whole range of materials used in modern construction. A must have for Civil and Structural engineering students, and for students of architecture, surveying or construction on courses which require an understanding of materials.
Download or read book Applied Strength of Materials for Engineering Technology written by Barry Dupen and published by Createspace Independent Publishing Platform. This book was released on 2018 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This algebra-based text is designed specifically for Engineering Technology students, using both SI and US Customary units. All example problems are fully worked out with unit conversions. Unlike most textbooks, this one is updated each semester using student comments, with an average of 80 changes per edition.
Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques. Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete. With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. Provides a review of concrete deterioration and damage Discusses condition assessment and repair techniques, standards and guidelines
Download or read book Materials Selection in Mechanical Design written by M. F. Ashby and published by Pergamon. This book was released on 1992-01-01 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found elsewhere. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.
Download or read book Mechanical Behavior of Materials written by Marc A. Meyers and published by . This book was released on 2008 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes numerous examples and problems for student practice, this textbook is ideal for courses on the mechanical behaviour of materials taught in departments of mechanical engineering and materials science.
Download or read book Building Materials written by S.K. Duggal and published by Routledge. This book was released on 2017-12-04 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on building materials includes discussion of structural clay products, rocks and stones, wood, materials for making concrete, ferrous and non-ferrous metals, and miscellaneous materials.
