Download or read book IBM System z Personal Development Tool Vol 4 Coupling and Parallel Sysplex written by Bill Ogden and published by IBM Redbooks. This book was released on 2013-05-31 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication describes the usage of Coupling Facility (CF) functions with the IBM System z® Personal Development Tool (zPDT). It describes the System z Coupling Application Developer Controlled Distribution, which is a Parallel Sysplex® "starter system" based on the AD-CD package and lists the exact steps taken to turn the normal AD-CD z/OS® system into a Parallel Sysplex base. This document assumes that the reader is familiar with basic zPDT usage and terminology, with z/OS, with the z/OS AD-CD system, with basic z/VM® usage, and with general Parallel Sysplex concepts. It is not intended as an introduction to any of these topics. This version of the document is based on z/VM 6.2 (as available to authorized users in an AD-CD package) and z/OS 1.13 (as available to authorized users in the January 2013 update of the AD-CD package).
Download or read book IBM System Z Personal Development Tool Volume 4 Coupling and Parallel Sysplex written by Bill Ogden (Computer programmer) and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IBM System Z Personal Development Tool Volume 4 Coupling and Parallel Sysplex written by Bill Ogden and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IBM System z Personal Development Tool Volume 3 Additional Topics written by Bill Ogden and published by IBM Redbooks. This book was released on 2013-06-28 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication introduces the IBM System z® Personal Development Tool (zPDT), which runs on an underlying Linux system based on an Intel processor. zPDT provides a System z system on a PC capable of running current System z operating systems, including emulation of selected System z I/O devices and control units. It is intended as a development, demonstration, and learning platform; it is not designed as a production system. This book, discussing more advanced topics, is the last of three volumes. The first volume introduces zPDT and provides reference material for zPDT commands and device managers. The second volume describes the installation of zPDT (including the underlying Linux, and a particular z/OS® distribution) and basic usage patterns. The third volume discusses more advanced topics that may not interest all zPDT users. The IBM order numbers for the three volumes are SG24-7721, SG24-7722, and SG24-7723. The systems discussed in these volumes are complex, with elements of Linux (for the underlying PC machine), z/Architecture® (for the core zPDT elements), System z I/O functions (for emulated I/O devices), and z/OS (providing the System z application interface), and possibly with other System z operating systems. We assume the reader is familiar with the general concepts and terminology of System z hardware and software elements and with basic PC Linux characteristics.
Download or read book IBM System z Personal Development Tool Volume 2 Installation and Basic Use written by Bill Ogden and published by IBM Redbooks. This book was released on 2013-06-18 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication introduces the IBM System z® Personal Development Tool (zPDT®), which runs on an underlying Linux system based on an Intel processor. zPDT provides a System z system on a PC capable of running current System z operating systems, including emulation of selected System z I/O devices and control units. It is intended as a development, demonstration, and learning platform and is not designed as a production system. This book, providing specific installation instructions, is the second of three volumes. The first volume describes the general concepts of zPDT and a syntax reference for zPDT commands and device managers. The third volume discusses more advanced topics that may not interest all zPDT users. The IBM order numbers for the three volumes are SG24-7721, SG24-7722, and SG24-7723. The systems discussed in these volumes are complex, with elements of Linux (for the underlying PC machine), IBM z/Architecture® (for the core zPDT elements), System z I/O functions (for emulated I/O devices), and IBM z/OS® (providing the System z application interface), and possibly with other System z operating systems. We assume the reader is familiar with the general concepts and terminology of System z hardware and software elements and with basic PC Linux characteristics.
Download or read book IBM System z Personal Development Tool Volume 1 Introduction and Reference written by Bill Ogden and published by IBM Redbooks. This book was released on 2013-06-24 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication introduces the IBM System z® Personal Development Tool (zPDT), which runs on an underlying Linux system based on an Intel processor. zPDT provides a System z system on a PC capable of running current System z operating systems, including emulation of selected System z I/O devices and control units. It is intended as a development, demonstration, and learning platform and is not designed as a production system. This book, providing an introduction, is the first of three volumes. The second volume describes the installation of zPDT (including the underlying Linux, and a particular z/OS® distribution) and basic usage patterns. The third volume discusses more advanced topics that may not interest all zPDT users. The IBM order numbers for the three volumes are SG24-7721, SG24-7722, and SG24-7723. An additional volume (SG24-7859) describes the use of zPDT in a Parallel Sysplex configuration. The systems discussed in these volumes are complex, with elements of Linux (for the underlying PC machine), z/Architecture® (for the core zPDT elements), System z I/O functions (for emulated I/O devices), and z/OS (providing the System z application interface), and possibly with other System z operating systems. We assume the reader is familiar with general concepts and terminology of System z hardware and software elements and with basic PC Linux characteristics.
Download or read book System z Parallel Sysplex Best Practices written by Frank Kyne and published by IBM Redbooks. This book was released on 2011-01-11 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication pulls together diverse information regarding the best way to design, implement, and manage a Parallel Sysplex® to deliver the levels of performance and availability required by your organization. This book should be of interest to system programmers, availability managers, and database administrators who are interested in verifying that your systems conform to IBM best practices for a Parallel Sysplex environment. In addition to z/OS® and the sysplex hardware configuration, this book also covers the major IBM subsystems: CICS® DB2® IMSTM MQ WebSphere® Application Server To get the best value from this book, readers should have hands-on experience with Parallel Sysplex and have working knowledge of how your systems are set up and why they were set up in that manner.
Download or read book IBM ZPDT Guide and Reference written by Bill Ogden and published by . This book was released on 2017 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract This IBM® Redbooks® publication provides both introductory information and technical details about the IBM System z® Personal Development Tool (IBM zPDT®), which produces a small System z environment suitable for application development. zPDT is a PC Linux application. When zPDT is installed (on Linux), normal System z operating systems (such as IBM z/OS®) can be run on it. zPDT provides the basic System z architecture and emulated IBM 3390 disk drives, 3270 interfaces, OSA interfaces, and so on. The systems that are discussed in this document are complex. They have elements of Linux (for the underlying PC machine), IBM z/Architecture® (for the core zPDT elements), System z I/O functions (for emulated I/O devices), z/OS (the most common System z operating system), and various applications and subsystems under z/OS. The reader is assumed to be familiar with general concepts and terminology of System z hardware and software elements, and with basic PC Linux characteristics. This book provides the primary documentation for zPDT.
Download or read book Power Systems Enterprise Servers with PowerVM Virtualization and RAS written by Dino Quintero and published by IBM Redbooks. This book was released on 2013-03-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication illustrates implementation, testing, and helpful scenarios with IBM Power® Systems 780 and 795 using the comprehensive set of the Power virtualization features. We focus on the Power Systems functional improvements, in particular, highlighting the reliability, availability, and serviceability (RAS) features of the enterprise servers. This document highlights IBM Power Systems Enterprise Server features, such as system scalability, virtualization features, and logical partitioning among others. This book provides a documented deployment model for Power 780 and Power 795 within a virtualized environment, which allows clients to plan a foundation for exploiting and using the latest features of the IBM Power Systems Enterprise Servers. The target audience for this book includes technical professionals (IT consultants, technical support staff, IT Architects, and IT Specialists) responsible for providing IBM Power Systems solutions and support.
Download or read book ABCs of z OS System Programming Volume 5 written by Paul Rogers and published by IBM Redbooks. This book was released on 2011-05-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ABCs of z/OS® System Programming is an eleven-volume collection that provides an introduction to the z/OS operating system and the hardware architecture. Whether you are a beginner or an experienced system programmer, the ABCs collection provides the information you need to start your research into z/OS and related subjects. If you would like to become more familiar with z/OS in your current environment, or if you are evaluating platforms to consolidate your e-business applications, the ABCs collection will serve as a powerful learning tool. The contents of the volumes are: Volume 1: Introduction to z/OS and storage concepts, TSO/E, ISPF, JCL, SDSF, and z/OS delivery and installation Volume 2: z/OS implementation and daily maintenance, defining subsystems, JES2 and JES3, LPA, LNKLST, authorized libraries, Language Environment®, and SMP/E Volume 3: Introduction to DFSMS, data set basics, storage management hardware and software, VSAM, System-Managed Storage, catalogs, and DFSMStvs Volume 4: Communication Server, TCP/IP and VTAM® Volume 5: Base and Parallel Sysplex®, System Logger, Resource Recovery Services (RRS), global resource serialization (GRS), z/OS system operations, Automatic Restart Management (ARM), Geographically Dispersed Parallel SysplexTM (GPDS), availability in the zSeries® environment Volume 6: Introduction to security, RACF®, Digital certificates and PKI, Kerberos, cryptography and z990 integrated cryptography, zSeries firewall technologies, LDAP, Enterprise identity mapping (EIM), and firewall technologies Volume 7: Printing in a z/OS environment, Infoprint Server and Infoprint Central Volume 8: An introduction to z/OS problem diagnosis Volume 9: z/OS UNIX® System Services Volume 10: Introduction to z/Architecture®, zSeries processor design, zSeries connectivity, LPAR concepts, HCD, and HMC Volume 11: Capacity planning, performance management, RMF, and SMF Volume 12: WLM Volume 13: JES3
Download or read book ABCs of z OS System Programming Volume 4 written by Paul Rogers and published by IBM Redbooks. This book was released on 2011-02-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication describes the functions of z/OS® Communications Server. z/OS Communications Server provides a set of communications protocols that support peer-to-peer connectivity functions for both local and wide-area networks, including the most popular wide-area network, the Internet. z/OS Communications Server also provides performance enhancements that can benefit a variety of TCP/IP applications. z/OS Communications Server provides both SNA and TCP/IP networking protocols for z/OS. The SNA protocols are provided by VTAM® and include Subarea, Advanced Peer-to-Peer Networking, and High Performance Routing protocols. z/OS Communications Server exploits z/OS UNIX® services even for traditional MVSTM environments and applications. Prior to utilizing TCP/IP services, therefore, a full-function mode z/OS UNIX environment including a Data Facility Storage Management Subsystem (DFSMSdfp), a z/OS UNIX file system, and a security product (such as Resource Access Control Facility, or RACF®) must be defined and active before z/OS Communications Server can be started successfully. The ABCs of z/OS System Programming is a 13-volume collection that provides an introduction to the z/OS operating system and the hardware architecture. Whether you are a beginner or an experienced system programmer, the ABCs collection provides the information that you need to start your research into z/OS and related subjects. If you want to become more familiar with z/OS in your current environment, or if you are evaluating platforms to consolidate your e-business applications, the ABCs collection will serve as a powerful technical tool. The contents of the volumes are as follows: Volume 1: Introduction to z/OS and storage concepts, TSO/E, ISPF, JCL, SDSF, and z/OS delivery and installation Volume 2: z/OS implementation and daily maintenance, defining subsystems, JES2 and JES3, LPA, LNKLST, authorized libraries, SMP/E, Language Environment® Volume 3: Introduction to DFSMS, data set basics storage management hardware and software, catalogs, and DFSMStvs Volume 4: Communication Server, TCP/IP, and VTAM Volume 5: Base and Parallel Sysplex®, System Logger, Resource Recovery Services (RRS), global resource serialization (GRS), z/OS system operations, automatic restart management (ARM), Geographically Dispersed Parallel SysplexTM (GDPS®) Volume 6: Introduction to security, RACF, Digital certificates and PKI, Kerberos, cryptography and z990 integrated cryptography, zSeries® firewall technologies, LDAP, and Enterprise identity mapping (EIM) Volume 7: Printing in a z/OS environment, Infoprint Server and Infoprint Central Volume 8: An introduction to z/OS problem diagnosis Volume 9: z/OS UNIX System Services Volume 10: Introduction to z/Architecture®, zSeries processor design, zSeries connectivity, LPAR concepts, HCD, and HMC Volume 11: Capacity planning, performance management, RMFTM, and SMF Volume 12: WLM Volume 13: JES3
Download or read book ABCs of IBM z OS System Programming written by Lydia Parziale and published by IBM Redbooks. This book was released on 2018-01-22 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ABCs of IBM® z/OS® System Programming is a 13-volume collection that provides an introduction to the z/OS operating system and the hardware architecture. Whether you are a beginner or an experienced system programmer, the ABCs collection provides the information that you need to start your research into z/OS and related subjects. Whether you want to become more familiar with z/OS in your current environment, or you are evaluating platforms to consolidate your online business applications, the ABCs collection will serve as a powerful technical tool. Volume 1 provides an updated understanding of the software and IBM zSeries architecture, and explains how it is used together with the z/OS operating system. This includes the main components of z/OS needed to customize and install the z/OS operating system. This edition has been significantly updated and revised.
Download or read book zPDT Sysplex Extensions 2020 written by Frank Kyne and published by IBM Redbooks. This book was released on 2020-10-16 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication describes the IBM System z® Personal Development Tool (IBM zPDT®) Sysplex Extensions 2020, which is a package that consists of sample files and supporting documentation to help you get a functioning, data sharing sysplex up and running with minimal time and effort. This book is a significant revision of zPDT 2017 Sysplex Extensions, SG24-8386. This package is designed and tested to be installed on top of a standard Application Developer Controlled Distribution (ADCD) environment. It provides the extra files that you need to create a two-way data sharing IBM z/OS® 2.4 sysplex that runs under IBM z/VM® in a zPDT environment. This package differs from the zPDT sysplex package delivered in IBM zPDT Guide and Reference System z Personal Development Tool, SG24-8205, in that it provides working examples of more sysplex exploiters. It also is designed to adhere to IBM's sysplex best practice recommendations, in as far as is possible in a zPDT environment. Although the package was not tested with IBM Z® Development and Test Environment (previously known as RD&T), it may be used to reduce the effort to create a fully functional sysplex under zD&T. Conceptually, the package might also be restored and used as a template to create a sysplex environment that is running on a real IBM Z CPC. The target audience for this document is system programmers who are responsible for designing, creating, and maintaining IBM Parallel Sysplex® environments. It can also be beneficial to developers who currently maintain their own ADCD environments and want to extend them to add sysplex functions.
Download or read book IBM CICS and the Coupling Facility Beyond the Basics written by Arndt Eade and published by IBM Redbooks. This book was released on 2018-02-21 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: It's easy to look at the title of a book and think "that's old news" or "I already know all there is to know on that subject." But before you dismiss this publication, consider just how far the IBM® Parallel Sysplex® architecture has come. From the early days the mainframe has embraced a shared everything approach. The original designers coded IBM z/OS® (called IBM MVSTM or IBM OS/390® back then) with the functionality necessary for the operating system to create the repositories, manage the data flow, and ensure the integrity of the systems involved. From there, the middleware systems provided the exploitation and advanced functions to mature the technology. The component in the middle of all this great technology can easily be taken for granted. That is the IBM Coupling Facility. This IBM Redbooks® publication discusses both traditional uses for the IBM Coupling Facility technology and new ways to use it with products such as IBM CICS®. You can learn how to perform new functions and have these functions benefit from the scalability and availability achieved only in a mainframe ecosystem. Open standards are a large part of considerations today, as most companies run IT shops with a mix of technology components. As the world embraces these technologies, it is necessary to understand how to mix the world of mainframe architectures and products with other open architectures. This mix allows the best tool to be used to solve processing needs, at the right cost and service levels. Often the functions needed for modern processing can be found in house, in places where staff are skilled and that already deliver the robust production environments you count on daily. This book discusses these modern functions and how to achieve them with CICS use of the IBM Coupling Facility. You will learn how one IBM client, Walmart, took these concepts far beyond the original design as they share their experiences and even share code examples to help you get started. The last chapter of this book shows what can be achieved when a combination of old and new functions are use together. Even if you have familiarity with what could be done with the IBM Coupling Facility in the past, there is much to learn and deploy in a modern world. Those who are familiar with the IBM Coupling Facility might find the content of this book helpful. Additionally, readers who are considering how to use the IBM Coupling Facility technology within their environment might also find useful information in the chapters that follow
Download or read book IBM System Z Personal Development Tool written by Bill Ogden (Computer programmer) and published by . This book was released on 2010 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ABCs of z OS System Programming written by Lydia Parziale and published by IBM Redbooks. This book was released on 2018-05-04 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ABCs of IBM® z/OS® System Programming is an 13-volume collection that provides an introduction to the z/OS operating system and the hardware architecture. Whether you are a beginner or an experienced system programmer, the ABCs collection provides the information that you need to start your research into z/OS and related subjects. If you would like to become more familiar with z/OS in your current environment, or if you are evaluating platforms to consolidate your e-business applications, the ABCs collection will serve as a powerful technical tool. This IBM Redbooks® publication, Volume 10, provides an introduction to IBM z/Architecture®, IBM z14 processor design, IBM Z connectivity, LPAR concepts and Hardware Configuration Definition (HCD). The contents of all the volumes are as follows: Volume 1: Introduction to z/OS and storage concepts, TSO/E, ISPF, JCL, SDSF, and z/OS delivery and installation Volume 2: z/OS implementation and daily maintenance, defining subsystems, JES2 and JES3, LPA, LNKLST, authorized libraries, SMP/E, IBM Language Environment® Volume 3: Introduction to DFSMS, data set basics storage management hardware and software, catalogs, and DFSMStvs Volume 4: Communication Server, TCP/IP, and IBM VTAM® Volume 5: Base and IBM Parallel Sysplex®, System Logger, Resource Recovery Services (RRS), global resource serialization (GRS), z/OS system operations, automatic restart management (ARM), IBM Geographically Dispersed Parallel SysplexTM (IBM GDPS®) Volume 6: Introduction to security, IBM RACF®, Digital certificates and PKI, Kerberos, cryptography and z990 integrated cryptography, zSeries firewall technologies, LDAP, and Enterprise Identity Mapping (EIM) Volume 7: Printing in a z/OS environment, Infoprint Server and Infoprint Central Volume 8: An introduction to z/OS problem diagnosis Volume 9: z/OS UNIX System Services Volume 10: Introduction to z/Architecture, z14 processor design, IBM Z connectivity, LPAR concepts, and HCD Volume 11: Capacity planning, performance management, WLM, IBM RMFTM, and SMF Volume 12: WLM Volume 13: JES3, JES3 SDSF
Download or read book IBM Z Os Parallel Sysplex Operational Scenarios written by Ibm Redbooks and published by . This book was released on 2009 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
