Download or read book High Performance Computing written by Juan Luis Crespo-Mariño and published by Springer Nature. This book was released on 2020-02-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th Latin American High Performance Computing Conference, CARLA 2019, held in Turrialba, Costa Rica, in September 2019. The 32 revised full papers presented were carefully reviewed and selected out of 62 submissions. The papers included in this book are organized according to the conference tracks - regular track on high performance computing: applications; algorithms and models; architectures and infrastructures; and special track on bioinspired processing (BIP): neural and evolutionary approaches; image and signal processing; biodiversity informatics and computational biology.

Download or read book AutoCAD 2017 3D Modeling written by Munir Hamad and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-21 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Game Engine Black Book DOOM written by Fabien Sanglard and published by Software Wizards. This book was released on with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: It was early 1993 and id Software was at the top of the PC gaming industry. Wolfenstein 3D had established the First Person Shooter genre and sales of its sequel Spear of Destiny were skyrocketing. The technology and tools id had taken years to develop were no match for their many competitors. It would have been easy for id to coast on their success, but instead they made the audacious decision to throw away everything they had built and start from scratch. Game Engine Black Book: Doom is the story of how they did it. This is a book about history and engineering. Don’t expect much prose (the author’s English has improved since the first book but is still broken). Instead you will find inside extensive descriptions and drawings to better understand all the challenges id Software had to overcome. From the hardware -- the Intel 486 CPU, the Motorola 68040 CPU, and the NeXT workstations -- to the game engine’s revolutionary design, open up to learn how DOOM changed the gaming industry and became a legend among video games.

Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications

Download or read book 3D Printing Intellectual Property and Innovation written by Rosa Maria Ballardini and published by Kluwer Law International B.V.. This book was released on 2016-04-24 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing (or, more correctly, additive manufacturing) is the general term for those software-driven technologies that create physical objects by successive layering of materials. Due to recent advances in the quality of objects produced and to lower processing costs, the increasing dispersion and availability of these technologies have major implications not only for manufacturers and distributors but also for users and consumers, raising unprecedented challenges for intellectual property protection and enforcement. This is the first and only book to discuss 3D printing technology from a multidisciplinary perspective that encompasses law, economics, engineering, technology, and policy. Originating in a collaborative study spearheaded by the Hanken School of Economics, the Aalto University and the University of Helsinki in Finland and engaging an international consortium of legal, design and production engineering experts, with substantial contributions from industrial partners, the book fully exposes and examines the fundamental questions related to the nexus of intellectual property law, emerging technologies, 3D printing, business innovation, and policy issues. Twenty-five legal, technical, and business experts contribute sixteen peer-reviewed chapters, each focusing on a specific area, that collectively evaluate the tensions created by 3D printing technology in the context of the global economy. The topics covered include: • current and future business models for 3D printing applications; • intellectual property rights in 3D printing; • essential patents and technical standards in additive manufacturing; • patent and bioprinting; • private use and 3D printing; • copyright licences on the user-generated content (UGC) in 3D printing; • copyright implications of 3D scanning; and • non-traditional trademark infringement in the 3D printing context. Specific industrial applications – including aeronautics, automotive industries, construction equipment, toy and jewellery making, medical devices, tissue engineering, and regenerative medicine – are all touched upon in the course of analyses. In a legal context, the central focus is on the technology’s implications for US and European intellectual property law, anchored in a comparison of relevant laws and cases in several legal systems. This work is a matchless resource for patent, copyright, and trademark attorneys and other corporate counsel, innovation economists, industrial designers and engineers, and academics and policymakers concerned with this complex topic.

Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. - Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies - Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields - Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more

Download or read book Fundamentals of 3D Food Printing and Applications written by Fernanda C. Godoi and published by Academic Press. This book was released on 2018-11-02 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of 3D Food Printing and Applications provides an update on this emerging technology that can not only create complex edible shapes, but also enable the alteration of food texture and nutritional content required by specific diets. This book discusses 3D food printing technologies and their working mechanisms within a broad spectrum of application areas, including, but not limited to, the development of soft foods and confectionary designs. It provides a unique and contemporary guide to help correlate supply materials (edible inks) and the technologies (e.g., extrusion and laser based) used during the construction of computer-aided 3D shapes. Users will find a great reference that will help food engineers and research leaders in food science understand the characteristics of 3D food printing technologies and edible inks. - Details existing 3D food printing techniques, with an in-depth discussion on the mechanisms of formation of self-supporting layers - Includes the effects of flow behaviour and viscoelastic properties of printing materials - Presents strategies to enhance printability, such as the incorporation of hydrocolloids and lubricant enhancers - 3D printing features of a range of food materials, including cereal based, insect enriched, fruits and vegetables, chocolate and dairy ingredients - Business development for chocolate printing and the prospects of 3D food printing at home for domestic applications - Prosumer-driven 3D food printing - Safety and labelling of 3D printed food

Download or read book Applications of 3D printing in Biomedical Engineering written by Neeta Raj Sharma and published by Springer Nature. This book was released on 2021-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on applications of three-dimensional (3D) printing in healthcare. It first describes a range of biomaterials, including their physicochemical and biological properties. It then reviews the current state of the art in bioprinting techniques and the potential application of bioprinting, computer-aided additive manufacturing of cells, tissues, and scaffolds to create organs in regenerative medicine. Further, it discusses the orthopedic applications of 3D printing in the design and fabrication of dental implants, and the use of 3D bioprinting in oral and maxillofacial surgery and in tissue and organ engineering. Lastly, the book examines the 3D printing technologies that are used for the fabrication of the drug delivery system. It also explores the current challenges and the future of 3D bioprinting in medical sciences, as well as the market demand.

Download or read book Research and Development Progress in 3D Cadastral Systems written by Efi Dimopoulou and published by MDPI. This book was released on 2019-10-28 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing complexity of infrastructures and densely built-up areas requires a proper registration of the legal status (private and public), which can only be provided to a limited extent by the existing 2D cadastral registrations. The registration of the legal status in complex 3D situations is investigated under the header of 3D Cadastres. This publication, containing 13 selected contributions on 3D Cadastre, addresses the following areas: 1. 3D Cadastre operational experiences (analysis, LADM based, learning from each other, discovering gaps), 2. 3D Cadastre cost-effective workflow for new/updated 3D parcels = 4D (part of whole chain: From planning/design/permit in 3D, to registration/use in 3D), 3. 3D Cadastre web-based dissemination (usability, man–machine interfaces, including mobile/AR), 4. legal aspects for 3D Cadastre, best legal practices in various legislation systems, focus on large cities, including developing countries, 5. 3D data management, and 6. visualization, distribution, and delivery of 3D parcels.

Download or read book 3D Printing in Biotechnology written by Nandita Dasgupta and published by Elsevier. This book was released on 2023-09-23 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Biotechnology: Current Technologies and Applications explains the basic designs and recent progress in the application of 3D printing within various biotechnology fields. The book is a compilation of the basic fundamentals, designs, current applications, and future considerations related to this emerging technology, and summarizes the promising application of 3D bioprinting. Chapters contain detailed state-of-the-art knowledge to assist in the development and design of 3D printers, with applications in the medical, food, and environmental fields. This book will appeal to researchers and students from different disciplines, including materials science and technology, food, agriculture, and various biomedical fields.The content includes industrial applications and fills the gap between the research conducted in the laboratory and practical applications in related industries. - Offers an introduction to the emerging technologies and sectors in the field of 3D printing - Discusses the development of sustainable materials and bio-inks - Provides a guide for medical professionals and practitioners to incorporate current 3D printing technology into their medical practice - Bridges the knowledge gap for current designs used in 3D printing technology for designing an efficient and innovative 3D printer - Previews the technological basis for new farming practices and food engineering concepts utilizing 3D techniques

Download or read book 3D Bioprinting in Tissue and Organ Regeneration written by Yang Wu and published by Academic Press. This book was released on 2022-09-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Bioprinting in Tissue and Organ Regeneration covers state-of-the-art advances and applications in bioprinting. Beginning with an introduction that considers techniques, bioinks and construct design, the authors then move onto a detailed review of applications of bioprinting in different biomedical fields (skin, cartilage, bone, vascularized tissue, etc.). This is followed by a chapter overview of intraoperative bioprinting, which is widely considered one of the important future trends in this area. Finally, the authors tackle ethical and regulation concerns regarding the utilization of bioprinting.The book is written by three global experts for an audience of students and professionals with some basic knowledge of bioprinting, but who seek a deeper understanding of the biomedical applications involved in bioprinting. - Introduces readers to bioprinting modalities, as well as pre-bioprinting, bioprinting and post-bioprinting procedures - Focuses on biomedical applications used in bioprinting in chapters specific to skin, cartilage, bone and vascularized tissue - Provides readers with original ideas from engineering and clinical points-of-view that are based on the authors' extensive experience in this field, as well as the possibilities of future translation of bioprinting technologies from bench to bedside

Download or read book 3D Printing in Healthcare written by Rishabha Malviya and published by John Wiley & Sons. This book was released on 2024-12-05 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of this book is to explore the application of 3D printing in medicine and healthcare that could revolutionize drug development and medical equipment production and also improve supply chains, pharmaceuticals, and healthcare. In the fields of medicine, pharmaceuticals, surgical planning, and personalized medical treatment, the novel emergence of 3D printing technology has opened a wide range of potential applications. With personalized solutions that were previously impossible, 3D printing has opened up novel possibilities in patient care, from developing unique medications to manufacturing prosthetics and implants that are particular to each patient. The 14 chapters in this volume present the reader with an array of subjects including: the evolution and background of 3D printing, charting its extraordinary path from its inauspicious origins to its current significance in the field of healthcare. Also discussed are the many kinds of 3D printers that are employed in additive manufacturing, as well as how they are modified for usage in medical settings; the current developments in medical science brought about by 3D printing technology, including the clinical uses of 3D printed models in different medical domains, ranging from cardiovascular illness to tumors, and congenital heart disease; personalized medicine and the creation of dosage forms utilizing 3D printing methods, the benefits and drawbacks of various 3D printing technologies and the applications of these technologies in healthcare, including the creation of immediate-release tablets, capsules, and implants for a range of illnesses; the possibilities of 3D printed anatomical models for surgical planning, the roles of 3D printing technologies that are used to produce surgical guides, knee implants, spinal implants, and other patient-specific applications; the current developments in 3D printed medication delivery devices including regulatory concerns; the field of personalized medicine using 3D printing, and discusses organ models for preoperative diagnostics, permanent non-bioactive implants, local bioactive and biodegradable scaffolds, and direct printing of tissues and organs; the different specialized uses of 3D printing in the medical field, covering topics including hospital management and administration, surgical training for urological operations, ophthalmology, and preserving safety and efficacy in point-of-care. Audience The book will be widely read by all healthcare professionals, biomedical engineers, researchers, and graduate students who are seeking to expand their knowledge of efficient techniques of 3D printing technology in the healthcare sector.

Download or read book Polymers for 3D Printing written by Joanna Izdebska-Podsiadły and published by William Andrew. This book was released on 2022-06-05 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers for 3D Printing: Methods, Properties, and Characteristics provides a detailed guide to polymers for 3D printing, bridging the gap between research and practice, and enabling engineers, technicians and designers to utilise and implement this technology for their products or applications. - Presents the properties, attributes, and potential applications of the polymeric materials used in 3D printing - Analyses and compares the available methods for 3D printing, with an emphasis on the latest cutting-edge technologies - Enables the reader to select and implement the correct 3D printing technology, according to polymer properties or product requirements

Download or read book 3D Printing Technology in Nanomedicine written by Nabeel Ahmad and published by Elsevier. This book was released on 2019-03-30 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing Technology in Nanomedicine provides an integrated and introductory look into the rapidly evolving field of nanobiotechnology. It demystifies the processes of commercialization and discusses legal and regulatory considerations. With a focus on nanoscale processes and biomedical applications, users will find this to be a comprehensive resource on how 3D printing can be utilized in a range of areas, including the diagnosis and treatment of a variety of human diseases. - Examines the emerging market of 3D-printed biomaterials and their clinical applications, with a particular focus on both commercial and premarket tools - Examines the promising market of 3D-printed nanoparticles, nanomaterial, biomaterials, composite nanomaterial and their clinical applications in the cardiovascular and chemotherapy realms - Develops the concept of integrating different technologies along the hierarchical structure of biological systems

Download or read book Fused Deposition Modeling Based 3D Printing written by Harshit K. Dave and published by Springer Nature. This book was released on 2021-04-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.

Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines

Download or read book 3D Printing and Intellectual Property written by Lucas S. Osborn and published by Cambridge University Press. This book was released on 2019-09-05 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intellectual property (IP) laws were drafted for tangible objects, but 3D printing technology, which digitizes objects and offers manufacturing capacity to anyone, is disrupting these laws and their underlying policies. In this timely work, Lucas S. Osborn focuses on the novel issues raised for IP law by 3D printing for the major IP systems around the world. He specifically addresses how patent and design law must wrestle with protecting digital versions of inventions and policing individualized manufacturing, how trademark law must confront the dissociation of design from manufacturing, and how patent and copyright law must be reconciled when digital versions of primarily utilitarian objects are concerned. With an even hand and keen insight, Osborn offers an innovation-centered analysis of and balanced response to the disruption caused by 3D printing that should be read by nonexperts and experts alike.